• Korean Journal of Hydrosciences
• /
• 제6권
• /
• pp.1-11
• /
• 1995

A plunge pool is often employed as an energy-dissipating device at the end of a spillway or a pipe culvert. A jet from spillways or pipes frequently generates a scour hole which threaten the stability of the hydraulic structure. Existing scour prediction formulas of plunge pool of spillways or pipe culverts give a wide range of scour depths, and it is, therefore, difficult to accurately predict those scour depths. In this study, a new experimental method and new sour prediction formulas under submerged circular jet for large bed materials with shallow tailwater depths were developed. A major variable, which was not used in previous scour prediction equations, was the ratio of jet size to bed material size. In this study, jet momentum acting on a bed particle and jet diffustion theory were employed to derive scour prediction formulas. Four theoretical formulas were suggested for the two regions of jet diffusion, i.e., the region of flow establishment and the region of established flow. The semi-theoretically developed scour prediction formulas showed close agreement with laboratory experiments performed on movable bed made of large spherical particles.

• 대한토목학회논문집
• /
• 제13권4호
• /
• pp.123-129
• /
• 1993

기연구 발표된 수많은 세굴 예측공식들은 여수로나 관암거 하류의 침강지내에서 발생하는 실제 세굴 깊이나 세굴 방지에 필요한 최소 침강지수심을 예측하기가 불가능할 정도로 광범위한 예측치를 나타내고 있다. 이같은 광범위한 예측 세굴 깊이는 대부분 세굴 지배인자에 대한 심도깊은 연구의 부족에 따른 인자들의 지나친 단순화에 기인하고 있다는 것을 문헌조사를 통하여 알수 있었다. 따라서 본 연구는 실험을 통하여 세굴을 지배하는 주요 지배인자들의 영향을 검토하였다. 문헌조사로부터 찾을 수 있었던 세굴 지배인자는 침강지수심, ?의 크기와 폭기정도, 하상입자의 입도분포 및 노출도 등이었으며 본 연구에서는 ?의 수리학적 특성 및 침강지 수면에서의 입사각, 침강지의 기하학적 특성, 그리고 ?의 크기 및 하상입자 크기의 영향을 중점적으로 검토하였다. 그 결과 침강지 수심과 ?의 수리학적 특성 및 기하하적 특성, 그리고 하상입자의 크기 등이 세굴을 지배하는 주요인자임을 알 수 있었다. 특히 기존 실험연구들의 광범위한 세굴 예측치는 ?의 크기와 하상입자의 크기에 대한 기하학적 상사법칙을 무시함에 기인하였음을 발견하였다.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.721-729
• /
• 1997

교량지점에서의 총세굴깊이는 세가지 성분 즉, 장기하상변동, 단면축소세굴, 그리고 국부세굴로 구성된다. 그러므로 장기하상변도의 분석은 교량지점에서의 총세굴깊이를 산정하는데 있어 중요하다고 할 수 있다. 본 연구에서는 CHARIMA모형과 HEC-6모형을 사용하여 남한강교 지점에서의 장기하상변동을 분석하였다. 분석결과, 5년 동안 정상류로 물이 흐를 경우 CHARIMA모형은 약 45cm의 하상고의 상승을 보여준 반면 HEC-6모형은 약 5cm정도 하상고가 저하되고 있음을 보여주었다. 5년 동안 부정류로 물이 흐를 경우 두 모형 모두 하상고가 심하게 변동됨을 보여주고 따라서 총세굴깊이 산정에 많은 영향을 미치고 있다. 그러므로 총세굴깊이를 적절하게 산정하기 위해서는 단면축소세굴과 국부세굴뿐만 아니라 장기하상변동 또한 정확히 산정해야 하겠다.

• 한국수자원학회논문집
• /
• 제49권6호
• /
• pp.529-536
• /
• 2016

본 연구는 급경사 자갈하상 만곡수로의 이동상 수리실험을 이용하여 만곡부 최대세굴심 산정공식들의 적용성을 평가하였다. 평균입경 43mm의 하천자갈을 $90^{\circ}$ 만곡 급경사 개수로에 포설하고 유량과 하상경사에 따른 만곡부의 최대세굴심을 조사하고 세굴심 공식으로 산정한 최대세굴심과 비교하였다. 자갈하상 만곡부 국부세굴은 유입부의 하상경사 0.02이상 $F_r$ 0.95이상에서 발생하였다. 이 수로에서 Lacey공식과 Zeller공식을 제외한 기존 세굴심 산정공식들은 최대세굴심을 과대 추정하는 것으로 나타났다. 하상재료를 고려한 Lacey공식과 접근경사와 만곡도를 반영한 Zeller공식은 급경사 자갈하상 만곡부의 최대세굴심 평가에 적용될 수 있는 것으로 판단된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.

• Water Engineering Research
• /
• 제1권4호
• /
• pp.259-266
• /
• 2000

Scour hole is formed due to the high shear stress of the jet flow at the outlet of a hydraulic structure and vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion occurs in the scour hole. It is important to determine the amount of vortex erosion for the design of bed protection. If the vortex erosion continues and reaches to the hydraulic structure, it causes the deformation of the structure itself. To obtain the amount of the vortex erosion, it is necessary to determine the shear velocity of the line vortex in the scour hole was derived by the theory of energy conservation and found to be related to the upstream overflow velocity. The amount of vortex erosion from the scour hole was obtained using entrainment equation for given value of shear velocity. For a design purpose, if the flow velocity at the end of an apron and the properties of bed material are given, the amount of vortex erosion was obtained.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.45-59
• /
• 1992

At downstream part of the hydraulic structures such as spiliway or drainage gate, jet flow can occur by gate opening. If stream bed is not hard or bed protection is not sufficient, scour hole will be formed due to high shear stress of the jet flow. We call this primary scour. Once the scour hole is formed, a vortex occurs in it and this vortex causes additional scour. We call this secondary scour. The primary scour proceeds to downstream together with flow direction but the secondary one proceeds to upstream direction opposite to it. If the secondary one continues and reaches to the hydraulic structure, it can undermine the bottom of hydraulic structure and this will lead to failure of structure itself. Thus, it is necessary to know the physical features of the vortex structure in a scour hole, which is the main mechanism of the secondary scour. This study deals with the characteristics of the vortex structure and its shear stress which causes the secondary scour.

• 물과 미래
• /
• 제26권4호
• /
• pp.107-115
• /
• 1993

본 연구는 3가지 교각형상에 대하여 국부적 정지상세굴에 대한 수리실험결과를 분석한 것이다. 실험결과에 의하면 국부적 상대세굴심은 교각형사, 하상입경의 기하표준편차, 유속비, 교각 푸르드수와 관계가 있는 것으로 나타났다. 교각의 상대세굴심은 반원사각형교각에서 가장 작고 하상재료가 균일할 때 보다 불균일할 때 현저하게 작게 나타났다. 입도의 불균일성으로 인한 세굴감소효과는 Raudkivi와 Ettema의 연구결과와 비교 검토하였다.

• Water Engineering Research
• /
• 제1권2호
• /
• pp.159-168
• /
• 2000

In this paper, the increment of the local scour depth at piers by constructing the bridge between existing bridges is examined through the experiments in which 5 piers in the non-cohesive bed material in the experimental flume were installed. In the experiments the maximum distance of 25 times of the pier length and the maximum distortion width of 8 times of the pier width were utilized. Through the experimental studies, it was indicated that low flow, which can be characterized as the flow having low Froude numbers, the maximum bed configuration change is obtained when the piers are installed in the straight line in the flor direction without any distortion. However, In the high flow, which can be characterized as the flow having high Froude numbers, the maximum bed configuration change is obtained when the piers are installed with some distortion from the flow direction. The influence of the bed configuration by interaction between bridge piers is changed depending upon the Froude numbers, the distance between piers, and the distortion width between adjacent bridge piers. Also, because the scour patterns are affected by the bed configuration, the maximum scour should be increased by about 60% compared to that in a single pier if the interaction between bridge piers exists. It can be suggested that the maximum scour depth at bridge piers predicted by applying the existing equations should be increased if the interaction between bridge piers exist. Those cases are found when new bridges are constructed successively in the river in the urban area.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1075-1080
• /
• 2002

The hydrological frequency of the flood in July 2000 at Seosi stream basin in Gurye and the bed scour of the stream channel were estimated to investigate the bed scour related with Jeongjang bridge collapse. The storm over the basin in July 2000, 303mm/day was 103year frequency rainfall and the equivalent flood was 2580cms. As the results of 100year and 30year flood application, flood level 30.78~31.38m and mean velocity 3.79~4.03m/s were appeared. And the purification project of Seosi stream increased the velocity of the section near to Jeongjang bridge by the improvement of conveyance at the downstream. The local scour at pier was the major factor of bed scour at Jeongjang bridge site and the total scour at pier No.6 was increased from 2.32m to 2.45m by the purification project.