• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.73-82
• /
• 1989

When the flood occurs in the alluvial rivers, the rivers adjust to the flood by means of the mechanism of the river bed variations and its morphological changes to pass that safely, the numerical model was developed to simulate the process of the alluvial river bed variation due to flood wave and carried out by the flood routing for flood wave and the sediment routing for river bed variation. The flood wave, river bed variation, and bed material size distribution may be analysed and predicted by this model. The ability of this model to predict the process of river bed response was proved by the application to the reach from Paldang dam to Indogyo site. In view of the flood analysis considering the sediment process, the effects of river bed variation for the flood routing may be negligible because the river bed variation is smaller than the unsteady flow variation during the same period. By the application of this model, it is shown that, in occurring of sequential flood events, the variation of the river bed and bed material size distribution due to flood wave is more dependent on the first flood event than the latter flood events, and that the river bed variation in this reach of the downstream Han river is dependent on the degradation and the coarsening of bed materials.

• Plant Journal
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2018

The CFB boilers technology is facing a number of challenges. Among them, boiler tube erosion, sintering by bed inventory overheating and high self consumed service power are major ones. This study was conducted to obtain allowable bed inventory with the Yeosu Power Plant, a 300 MW class CFB boiler. For the test, bed pressure was reduced from design pressure of 4.5 KPa to 2.5 KPa by reducing bed inventory, at fixed turbine output, coal consumption rate and air flow. Consequently, reducing the lower bed inventory is effective to decrease bed temperature but excessive reducing might increase bed temperature due to lack of circulating fluidized materials. Also, in case of the Yeosu Plant boiler using subbituminous coal as its primary fuel, its bed temperature change is highly affected by not only the amount of bed inventory, but also the boiler capacity and coal contents.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.283-288
• /
• 2002

The heavy downpour caused by unusual weather has destroyed a railroad bed. It caused a large amount of soil loss due to soil erosion. Hence, there is necessary to rehabilitate the destructed railroad bed as quickly as possible. Application of geotextile bag can standardize the rehabilitation process. Geotextile bag method can be more stable, faster, and more economical. In this study, the stress to geotextile bag was estimated to select the appropriate geotextile material. Geotechnical characteristics of geotextile were also determined.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.499-502
• /
• 2001

In this experiment, an attempt to use the sludge pellets as catalyst for NO removal from simulated gas is experimentally investigated by using cylinder type reactor and packed-bed reactor. An experimental investigation has been conducted for NO concentration of 50[ppm], 100[ppm], 200[ppm] balanced with air, a gas flow rate of 5[1/min]. Ac voltage to discharge the gases was supplied. In the result, NOx removal rate in packed bed reactor is higher than that in cylinder type reactor. it is thought that plasma density in contact point of BaTiO$_3$ is significantly higher than that in cylinder reactor.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.1
• /
• pp.29-39
• /
• 2011

This study aims to investigate the relationship between the mean diameter of bed material and the tractive force due to flow in domestic natural rivers. To investigate the size of bed material, sampling in the field and estimation of mean diameter have been conducted. The relationship between the mean diameters and tractive force is figured out by calculating tractive force and frictional velocity. The field works have been carried out at 94 location of 18 rivers including 4 large watersheds. In order to determine the quantities of discharge used to calculate the tractive force, the various values of frequency have been estimated and tested. As a result, it is found that the 1.01 year frequency discharge is most appropriate for the bankfull discharge. From results, the relatioship between the mean diameter of bed material the tractive force is presented in this study.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.119-127
• /
• 2003

In this study we propose an unsteady I-dimensional model of bed combustion with multiple solid phases, which confers a phase on each solid material. This model can be applied to a variety of bed combustion cases of various configurations and ignition methods. It contains fuel combustion, gaseous reaction, heat transfers between each phase, and geometric changes of the solid particles. An iron ore sintering pot is selected for verifying the model validity and simulation results are compared with the limited experimental data set of various coke contents and air supply rates. They predict the experimental results well and show applicabilities to the various system of the fuel bed with various solid materials.

• Journal of the Korean Geophysical Society
• /
• v.6 no.2
• /
• pp.107-119
• /
• 2003

The behavior of pore pressure and effective stress in a highly saturated sand bed under variations in the water pressure in its surface were investigated to determine the mechanism of the collapse of hydraulic structures during flooding or when attacked by storm waves. The vertical, one-dimensional model was used as a basic model to clarify the effect of water pressure variation on only to the vertical direction. The theoretical results show that a sand bed under variations of water pressure is weakened by an increase in excess pore pressure and that under certain conditions the sand bed will liquefy. Although many factors related to water pressure variation and property of the material determine this phenomenon, the mist important factor seems to be the small amount of air present in the sand bed. The theoretical results reported are verified by experiments.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.35-42
• /
• 2016

With radical increase in one-person households, the consumption market in Korea has also rapidly changed. In line with this movement, customized furniture for sing lecustomershas been recently introduced. Since sleeping more than eight hours a day is needed to maintain a healthy lifestyle, a suitable bed for a comfortable sleep is an essential product for single consumers. In order to respond to this trend, a study was conducted to examine the surface materials of a bed designed for singles. A complete enumeration survey was implemented for beds manufactured by ACEBED Co., Ltd., Simmons-k, Co, Ltd,. Keumsung Bed, Hanssem Co,. Ltd., Hyundai Livart Co,. Ltd,. Emons Furniture Co,. Ltd,. and Borneo International Furniture Co., Ltd. This study helped in the proper selection of surface materials that may be used in the development of furniture for single consumers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.108-113
• /
• 1993

The material for the machine tool structure should have high static stiffiness and damping in its property to improve both the static and dynamic performances. The static stiffness of a machine tool can be inceased by using either higher modulus material in the structure of a machine tool. However, the machine tool structrue with high stiffness but low damping is vulnerable to vibration at the resonance frequencies of the structure . For the high precision and highsped machine tool structure, therefore, the high damping capacity is most important in order to suppress vibration. The damping of a machine tool can not be increased by increasing the static stiffness. The best way to increase the damping capacity of the machine tool structure is to use a composite material which is composed of on material with high stiffness with low damping and another material with low stiffness with high damping. Therefore, in this paper, the bed of the ultra high precision grinding machine for mirror surface machining of brittle materials such as ceramics and composite materials was designed and manufactured with the epoxy concrete material. The epoxy concrete material was prepared by mixing epoxy resin with different size sands and gravels. The modulus, compressive strength, coefficient of thermal expansion, specific heat, and damping factor were measured by varying the compaction ratio, sizes and contents of the ingredients to assess the effect of the processing parameters on the mechanical properties of the material. Based of the measured properties, the prototype epoxy resin concrete bed for the mirror surface CNC grinding machine was designed and manufactured.