• Ocean and Polar Research
• /
• v.43 no.2
• /
• pp.89-98
• /
• 2021

The seagrass habitats are a highly productive marine ecosystem which provides nursery ground and shelter for many fish and invertebrate species. Pholis nebulosa (Temminck & Schlegel, 1845) is one of the most abundant seagrass fishes in the coastal waters of Korea. The estimation of fish production is key for devising conservation measures and ensuring fish resources sustainability. A total 894 P. nebulosa ranging from 3.83 to 26.5 cm total length (TL) were collected monthly in 2006 with a small beam trawl in a seagrass bed of southern Korea. Growth parameters of P. nebulosa were estimated using the von Bertalanffy growth model, and production was estimated using a general equation which relates daily fish production to ash-free dry weight (AFDW), biomass, and water temperature. The von Bertalanffy's growth equation was estimated as: L_t = 28.3823(1-e^{-0.7835(t+0.9864)}). The densities, biomass, daily, annual production, and P/B ratio were 0.069±0.061/m^-2, 1.022±0.621 g/m², 0.005±0.004 g AFDW/m²/day, 1.676 g AFDW/m²/yr, and 1.641, respectively. Monthly variation in production of P. nebulosa peaked during March and April 2006 (0.0139 and 0.0111 g AFDW/m²/day), whereas the lowest value of 0.0005 g AFDW/m²/day was in December. Monthly change in production of P. nebulosa was positively correlated with biomass and condition factor. Our results will contribute to the conservation of seagrass ecosystems, which are still undisturbed in the study area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.165-172
• /
• 2021

The purpose of this study is to investigate the carbon capture capacity of various inorganic materials. For this purpose, the change in property of ordinary Portland cement (OPC), blast furnace slag fine powder (GGBS), and circulating fluidized bed boiler ash (CFBC) due to carbonation were analyzed. Carbonation curing was performed on all specimens through the accelerated carbonation experiment, and the amount of carbon capture was quantitatively analyzed by thermogravimetric analysis according to the age of carbonation. From the results, it is confirmed that the carbon capture capacity was shown in all specimens. The carbon capture amount was shown in the order of CFBC, OPC, and GGBS. The 28-day carbon capture of CFBC, OPC, and GGBS was 3.9%, 1.3%, and 9.4%, respectively. Carbon capture reaction occurred rapidly at the beginning of carbonation, and occurred slowly with increasing age. SEM image analysis revealed that an additional product generated by carbonation curing in all specimens was calcium carbonate.

• Journal of Biomedical Engineering Research
• /
• v.44 no.1
• /
• pp.80-84
• /
• 2023

Electrodes are one of the types of biosensors capable of measuring bio signals, such as electrocardiogram (ECG) and electromyogram (EMG) signals. These electrodes are used in various fields and offer the advantage of being able to measure ECG signals without the need for skin attachment, compared to Ag/AgCl electrodes. The purpose of this study was to evaluate the efficacy of conductive textile electrodes in collecting ECG signals in a bed-like environment. Three adult participants were involved, and a total of 30 minutes of ECG signals were collected for each participant. The collected ECG signals were analyzed to determine the heart rate, normLF and a comparison was made between the conductive textile electrodes and Ag/AgCl electrodes. As a result, the change in heart rate and normLF could be observed, and in particular, the difference between the two electrodes decreased. This study confirmed that conductive textile electrodes can effectively collect ECG signals in a bed-like environment. It is hoped that this research will lead to the development of a system that can detect various sleep-related diseases through the use of these electrodes.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.123-129
• /
• 2000

As materials on the river bed have been changing through erosion, transportation and accumulation, so does the waterway's section. So many bridges have nowadays been constructed to the same direction as water flows. However further researches are still needed on the scours of succession row piers and multiple row piers. Analyzing them through hydraulic stimulation experiments, this study deals with the scour character with the change of diameters in row piers which have been built in the identical direction of water flow and also the part-scour character change in multiple row piers.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.43-49
• /
• 2005

Social interest and request about low pollution waste treatment process are growing and gasification melting method, as a new technology concept, is risen. The necessity of engineering analysis to determine design standards and operation condition is required. In this study, the objective and function of components and operation process of various gasification melting furnaces such as shaft type, fluidized bed and Rotary Kiln type gasification melting furnace are reviewed and the design standard and operation range of gasification melting furnace are determined by inspecting the change of output and operation condition with input condition change.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.518-521
• /
• 2008

When constructing a high-speed railroad, the reduction of the distance between track centers and the width of track bed will save the construction cost. However the shortening the distance between track centers may cause the stability problems due to higher wind pressure. Therefore the extensive technical review and aerodynamical study should be performed to determine the adequate distance between track centers. In this study, the impact that the increase in wind pressure due to the change of aerodynamic phenomena with the change of the distance between track centers may have on two trains passing by each other was predicted, and the stability of train operation was analyzed in order to review the distance between track centers suitable to Honam HSR trains. And we estimated the aerodynamical effects by the results of the real train experiments by using KTX.

• Solar Energy
• /
• v.6 no.1
• /
• pp.3-11
• /
• 1986

Minimum fludizing velocities and voidages were investigated for closely sized sand and magnesia particles with mean diameters in the range of $297-841\;{\mu}m$ over the temperature between 15 and $1.000^{\circ}C$. Boundaries between changing behaviour at $Re_{mf}=14$ and Ar=17,000 were observed. In beds of fine particles in Geldart's group "B", the minimum fluidizing velocity ($U_{mf}$) decreased as temperature increased, but not as much as expected on account of the gas viscosity increase, furthermore the increase in the minimum fluidizing voidage (${\in}_{mf}$). With larger particles in group "D", $U_{mf}$ increased, first, with temperature increase because of reduced gas density, and depending on the particle size, $U_{mf}$ reduced as flow conditions moved from turbulent to laminar. Among the correlations predicting $U_{mf}$, Ergun equation agreed best with the experimental data providing that the change in ${\in}_{mf}$ according to temperature is allowed for.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2519-2523
• /
• 2008

When constructing a high-speed railroad, the reduction of the distance between track centers and the width of track bed will save the construction cost. However the shortening the distance between track centers may cause the stability problems due to higher wind pressure. Therefore the extensive technical review and aerodynamical study should be performed to determine the adequate distance between track centers. In this study, the impact that the increase in wind pressure due to the change of aerodynamic phenomena with the change of the distance between track centers may have on two trains passing by each other was predicted, and the stability of train operation was analyzed in order to review the distance between track centers suitable to Honam HSR trains. We conducted the parametric study of the effects of train wind on the running stability.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.4
• /
• pp.59-69
• /
• 1998

Biological treatment systems generally can be divided into two main classes of a suspended sludge process and attached one like a fluidized bed reactor. These process are considered to bring remarkable change in species composition of microorganisms, due to difference of a state of biofilm, a concentration and diffusion velocity of dissolved oxygen, a concentration and diffusion velocity of substance or poisonous matter. The change of species composition bring different treatment result for influence factors like F/M ratio, DO concentration, pH or poisonous matter. This study is to investigate the reaction characteristics of both microorganisms, namely, a suspended sludge and attached sludge, through the changes of pH, temperature and substance concentration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1231-1236
• /
• 2017

In this study, we developed a system that can change position to improve obstructive sleep apnea. Blocking of the breathing airway caused by obstruction of the apnea, lateral position is provided by the airway to improve the apnea. We used a pressure sensor (FSR402) in the form of an array to determine the position of patient. The air cylinder was controlled to raise and lower the bed. As a result of calculating the pressure difference between the supine position and the lateral position, it was $0.41{\pm}0.30$ and $1.09{\pm}0.73$. In other words, when the patient is lateral position, the difference between the sensor values on the right and left side is large. Therefore, it is confirmed that the system can maintain airway to breath for improvement of obstructive sleep.