• 펄프종이기술
• /
• 제47권6호
• /
• pp.57-65
• /
• 2015

Microfibrillated cellulose (MFC) or Nanofibrillated cellulose (NFC) has been used to reduce the use of raw pulp and to improve paper strength. The problem of MFC preparation is high manufacturing cost. In this study, it was carried out to prepare MFC after enzyme beating and estimated properties of MFC. Endo-D was the best beating efficiency among three type of endo-glucanase. As the grinder pass number increased, the viscosity and the fines of MFC suspension increased while the crystallinity and the porosity of MFC sheet decreased. Also enzyme beating MFC was higher value in the crystallinity and lower value in the viscosity than non-enzyme MFC. In addition, the aspect ratio of MFC was the highest at 5 pass. MFC addition improved the handsheet strength and the air permeability but worsened the drainage.

• 펄프종이기술
• /
• 제47권3호
• /
• pp.3-10
• /
• 2015

In this study, we evaluated properties of pulp treated with swelling agent and swelling concentration. We used swelling agent, such as NaOH, DMSO, urea. One of them, pulps treated with NaOH from 0 to 5% measured WRV, beating efficiency, crystallinity and aspect ratio. We identified that NaOH when freeness reaches 100mL CSF was the shortest, on the other hand, WRV didn't change. Because NaOH is good beating efficiency, when pulp treated with various concentration of NaOH from 0 to 5%, pulp treated 1% NaOH was best beating efficiency. However, WRV, crystalline structure and crystallinity didn't change. The more NaOH concentration increased, the more aspect ratio increased, but when NaOH concentration exceeds 3%, aspect ratio decreased. As a result, pulp treated with 1% NaOH was the greatest beating efficiency and WRV, chemical structure didn't change.

• 한국연초학회지
• /
• 제22권1호
• /
• pp.99-106
• /
• 2000

In order to investigate the applicability of lyocell fiber to filter paper, papper sheets were manufactured with the addition of lyocell fibers in various length(1.5 denier: 2, 3, 4mm) and content(10, 30, 50%) and their physical characters, such as fibrilation rate, adsorption efficiency of methylene blue(MB), paper formation, and crimping ability, etc, were tested. The level of main fibrilation from lyocell fiber was higher in wet beating process than that in free beating because of the higher strength of lyocell fiber compared with wood fiber. Fibrilation could be observed at the degree of beating over 30$^{\circ}$ SR in wet beating with Valley beater. The air permeability and tear factor of the paper increased and the paper formation index decreased according to the increase of fiber length. The weak binding force of lyocell fiber in spite of its higher fiber strength, might be a limitng factor in addition of lyocell fiber to the natural wood pulp in manufacturing the paper having the needed physical properties. High contents of wood pulp decreased air permeability, the breaking length, tear factor, the bursting strength, and paper formation index in paper sheets. As the contents of lyocell increased from 10% to 100%, the adsorption efficiency of MB was elevated to 1.7-7.9 times compared with that in 100% wood pulp. But the length of lyocell fiber did not affect the MB adsorption.

• 펄프종이기술
• /
• 제46권4호
• /
• pp.69-75
• /
• 2014

Effects of alkali swelling of HwBKP (hardwood bleached kraft pulp) at a low concentration below 2 percent (based on the oven-dried weight of pulp) on handsheet properties were investigated. Swelling treatment of HwBKP was performed at various low NaOH concentrations with/without beating. Then, the changes in handsheet properties were evaluated in terms of bulk, optical and strength properties. It was found that bulk was slightly increased when the alkali concentration was increased. When the pulp was only swollen without beating, paper optical and strength properties was slightly decreased or not changed with alkali concentration. When the pulp was alkali-swollen after beating, paper strength and opacity showed almost no changes while brightness was increased. When the pulp was beaten after NaOH swelling, alkali concentration showed almost no effect on brightness and opacity of paper. Paper strength was slightly decreased with alkali concentration, suggesting that alkali pretreatment before refining could adversely affect refining efficiency.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.1-9
• /
• 2000

As the speed of the paper machine and printing press increases, the dependency of the production efficiency upon the frequency of web break increases. It is believed that flaw or crack that presents in paper is one of the most important for web break. Runnability of papers on the paper machine could be evaluated by measuring fracture toughness. In this paper the effect kof beating and pressing on the runnability was investigated using handsheets made from softwood bleached kraft pulp beaten to different freeness. Pressing pressure was also varied to obtain different levels of sheet consolidation. Density, tensile strength, and J-integral of the handsheets were evaluated. For measuring J-integral either a single specimen method or RPM method was employed. Results showed that the density and tensile strength were improved as beating and pressing increased because of increased interfiber bonding. J-integral increased with beating until the CSF reached 400mL. No significant difference in J-integral, however, was observed afterward with the increase of beating. And it appeared to be due to acceleration of the stress concentration around the crack that exists on the fiber wall of the sheet when cracks exists.

• 헤리티지:역사와 과학
• /
• 제40권
• /
• pp.73-104
• /
• 2007

신라왕경지역에 대한 발굴조사에서 출토된 평기와와 전 중에서 비교적 초기 기와가 출토된 것 으로 인정되고 있는 유적을 중심으로, 출토사례와 평기와 제작방법-단판(短板), 중판(中板), 장판(長板) 그리고 인장와(印章瓦)-에 대한 비교작업을 통해서 개개 유물이 출현한 시기에 대한 초보적인 접근을 시도하였다. 그 결과 경주지역에서 기와가 제작된 시기에 대해서는 앞으로 많은 자료의 출현을 기대해야 할 필요가 있다. 기와의 사용은 무와통(無瓦桶) 혹은 와통으로 제작된 단판 기와가 초기에 제작되다가, 무와통식 기와가 소멸하게 되는데, 이는 결국 와통을 이용한 기와제작법의 효율성에 기인한 것으로 판단된다. 단판 기와 역시 중판 타날판으로 제작된 기와와 비교해 볼 때, 작업능률면에서 뒤떨어지지만 매우 정성을 들여서 제작을 하였다. 이러한 작업공정은 단순히 작업능률만으로 설명하기 어려운 부분으로, 이들 단판 기와의 제작은 궁성 혹은 관청 등으로 납품되는 기와에 한정 되었을 기능성을 보여 준다. 따라서 단판 기와는 일정한 목적을 가지고 제작되었을 가능성이 제기된다. 중판 기와는 통쪽(模骨) 혹은 원통 와통(圓筒瓦通)에 의해 제작된 기와로 신라가 백제와 고구려를 병합한 이후로는 전국적으로 확산되게 된다. 고구려나 백제와 달리 신라 고유의 제와술이 반영된 기와로 대량생산에 적합한 제작법으로 전국적으로 급속하게 보급되게 되면서, 고구려 백제계 제와 술은 점차 소멸하게 된다. 장판 기와는 경주지 역에서는 거의 확인되지 않지만, "사천왕사"명 평기와와 삼랑사3길 유적에서 출토된 어골문 평기와 등이 알려져 있다. 경주 외곽에서는 장판 기와가 8세기 후반에서 9세기 초에 등장하는 것으로 보고되고 있고, 타날판에 새겨진 문양을 보면 선조문, 어골문, 사격자문등과 다소 복잡해진 기하학문과 각종 문자(연호, 지명 등)가 확인된다. 현재까지 경주지역에서 확인된 통일신라의 장판 기와의 존재에 대해서는 여러 가지 이견이 있으므로, 이 문제를 풀기 위해서는 사천왕사와 같이 창건연대가 분명한 유적에 대한 발굴조시를 통해서 확실한 층위적 공반관계에 기초한 기와연구가 이루어져야 할 것이다. 경주지역에서 인장와가 사용되는 시기는 무와통작법(無瓦桶作法)이나 단판 기와보다 늦으며, 백제지역의 경우 오부(五部)나 간지 (干支) 등이 확인되는데 비하여, 신라지역에서는 부호나 기호가 많이 보이고 있다. 이러한 차이는 인장와를 제작하던 공인집단의 성격차이로 보이며, 신라에서 인장와가 확인되는 시점은 679년을 기준으로 그 이후로 추정된다. 또한 인장와 및 인장전에 표기된 내용이 문자가 아니라 기호인 점은 백제지역에서 기존에 시용하던 방식이 변화되었음을 알려주며 그러한 계기는 결국 신라의 병합에 의한 제작환경의 변화로 추정된다. 그리고 인장와는 경주지역에서 일시적으로 사용되다가 소멸되는데, 그러한 원인은 결국 원통 와통과 중판 타날로 제작되던 <신라기와>가 전국적으로 보급되면서, 고구려나 백제의 제와기술이 도태되는데서 찾을 수 있다. 결국 신라에 의한 삼국의 병합은 국가별로 각각 특징이 있던 제와기술을 신라의 것으로 통일시키는 과정에서 귀착된 것이다.

• 동아시아식생활학회지
• /
• 제22권6호
• /
• pp.860-867
• /
• 2012

Codonopsis lanceolata serves as, an appetizing health food for its, characteristic flavor, taste, and texture:however, it requires a long and complicated cooking process. Therefore, this study conducted pre-processing procedures to improve the cooking process and Codonopsis lanceolata more easily. For processing efficiency, freezing and blanching were efficient for peeling and the rate of peel disuse. In addition the freezing process, effectively reduced the time spent in beating raw material. In the salinity test, freezing and blanching quickly increased salinity over 28 days. As the result of SEM cross-section tests showed that frozen Codonopsis lanceolata become porous, it's assumed that seasoning permeates into this cross-section efficiently. As the appearance of Deodeok-gui as significant differences according to the pre-processing methods, this study examined pre-processing methods(time spent in peeling, rate of peel disuse, time spent in beating out material, salinity, moisture content, texture, and the color) of Codonopsis lanceolata. After testing Deodeok-gui, it was found that freezing is effective, not only for process efficiency and cooking time reduction, but also for improving its qualities.

• 대한설비공학회지:설비저널
• /
• 제4권3호
• /
• pp.183-190
• /
• 1975

Most Korean houses are heated by the Ondol heating system. There has been, however, no reasonable design procedure availabe yet for the system. The conventional design should be improved to have auniform floor surface. temperature distribution and to have a high thermal efficiency. Thermal efficiencies of the ondol were defined and the method of experimentation was studied. An experiment, using a life-size model which was well insulated, was performed to observe the variation in thermal efficiency as the length of fuel burning time was varied.

• 펄프종이기술
• /
• 제47권1호
• /
• pp.59-65
• /
• 2015

In this study, we evaluated optimum condition of enzyme with pH and temperature for preparation of microfibillated cellulose(MFC). Well-known endo-glucanase, three enzymes were used and CMC was used for substrate. Enzyme activity was evaluated using DNS method and absorbance with UV/VIS spectrophotometer. The enzyme shown the greatest activity was reacted with pulps at optimum condition for 1 hour and treated pulps beated until 100 mL CSF. Enzyme B and Enzyme L was the higher enzyme activity below 0.1% concentration and Enzyme N was the lowest enzyme activity. At various pH and temperature conditions, enzyme activity of Enzyme B was higher than the others at the same concentration. Especially enzyme activity at $50^{\circ}C$ of Enzyme B was almost not changed over pH 6.0. Optimum condition of three enzyme was pH 6 or pH 7 and $50^{\circ}C$ or $60^{\circ}C$. Also beating efficiency of enzyme treated pulps with Enzyme B is 55.6%.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.77-82
• /
• 2011

The changes in the wet pressing response of old corrugated container(OCC) stock depending on the beating treatment and the addition of polymer aids were investigated with laboratory roll press instrument. Two types of polymer aids, such as high molecular weight polymer with low charge density and low molecular weight polymer with high charge density, were applied in this study. The more beaten OCC stock showed the lower dryness after wet pressing. The addition of polymer aids had great influences on the wet pressing efficiency and paper properties. The dryness after wet pressing was increased by the addition of polymer aids, but the pattern of changes in dryness were different depending on the type of polymer and the properties of stock. The higher molecular weight polymer aids showed the greater increase in the dryness. The properties of paper such as air permeability, bulk, formation, tensile strength were also greatly affected by the addition of polymer aids.