• Ocean and Polar Research
• /
• v.45 no.2
• /
• pp.71-87
• /
• 2023

Climate change causes ocean warming, ocean acidification, sea-level rise, dynamic coastal risk, change of ecosystem structure and function, and degradation of ecosystem services. Not only that, but it has negatively impacted the well-being of people, society, and culture, including food security, water resources, water quality, livelihood, health, welfare, infrastructure, transport, tourism, recreation, and so on, especially by particularly degrading indigenous communities and generating an inequitable distribution of benefits and costs. As pointed out here, these adverse impacts of climate change on the ocean have been emphasized at the international and national levels. In contrast, the ocean field has been neglected in the climate change conversation for too long. However, since the UNFCCC COP 25, the ocean has been drawn into the discussion as a solution to address climate change. Moreover, the U.S. Congress recently unveiled a bill called the 'Ocean-Based Climate Solution Act, OBCSA' that reflects the new paradigm of the international regime. The comprehensive legislative bill includes elements related to climate inequity, a blue economy, and a community-led bottom-up policy mechanism, which will have a significant bearing on the ocean-climate legal system. Therefore, this study reviews the OBCSA and deduces implications with regard to the ocean-climate legal system in Korea.

• Composites Research
• /
• v.36 no.4
• /
• pp.259-263
• /
• 2023

This study investigated the open hole tensile (OHT) properties of carbon fiber/epoxy composites and compared them to bolt joint tensile (BJT) properties. The net nominal modulus and strength (1376 MPa) were found to be higher than the gross nominal strength (1041 MPa), likely due to increasing hole size. The OHT and BJT specimens exhibited similar stiffness, as expected without bolt rotation causing secondary bending. OHT specimens experienced a sharp drop in stress indicating unstable crack propagation, delamination, and catastrophic failure. BJT specimens failed through shear out on the bolt side and bearing failure on the nut side, involving fiber kinking, matrix splitting, and delamination, resulting in lower strength compared to OHT specimens. The strength retention of carbon fiber/epoxy composites with open holes was 66%. Delamination initiation at the hole's edge caused a reduction in the stress concentration factor. Filling the hole with a bolt suppressed this relieving mechanism, leading to lower strength in BJT specimens compared to OHT specimens. Bolt joint efficiency was calculated as 15%. The reduction in strength in bolted joints was attributed to fiber-matrix splitting and delamination, aligning with Hart Smith's bolted joint efficiency diagram. These findings contribute to materials selection and structural reliability estimation for carbon fiber/epoxy composites. They highlight the behavior of open hole and bolt joint configurations under tensile loading, providing valuable insights for engineering applications.

• Structural Engineering and Mechanics
• /
• v.81 no.1
• /
• pp.11-28
• /
• 2022

This paper considers the combination of cyclic and axial loads to investigate the hysteretic performance of H-section 6061-T6 aluminum alloy members. The hysteretic performance of aluminum alloy members is the basis for the seismic performance of aluminum alloy structures. Despite the prevalence of aluminum alloy reticulated shells structures worldwide, research into the seismic performance of aluminum alloy structures remains inadequate. To address this deficiency, we design and conduct cyclic axial load testing of three H-section members based on a reliable testing system. The influence of slenderness ratios and bending direction on the failure form, bearing capacity, and stiffness degradation of each member are analyzed. The experiment results show that overall buckling dominates the failure mechanism of all test members before local buckling occurs. As the load increases after overall buckling, the plasticity of the member develops, finally leading to local buckling and fracture failure. The results illustrate that the plasticity development of the local buckling position is the main reason for the stiffness degradation and failure of the member. Additionally, with the increase of the slenderness ratio, the energy-dissipation capacity and stiffness of the member decrease significantly. Simultaneously, a finite element model based on the Chaboche hybrid strengthening model is established according to the experiment, and the rationality of the constitutive model and validity of the finite element simulation method are verified. The parameter analysis of twenty-four members with different sections, slenderness ratios, bending directions, and boundary conditions are also carried out. Results show that the section size and boundary condition of the member have a significant influence on stiffness degradation and energy dissipation capacity. Based on the above, the appropriate material constitutive relationship and analysis method of H-section aluminum alloy members under cyclic loading are determined, providing a reference for the seismic design of aluminum alloy structures.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• Plant Biotechnology Reports
• /
• v.1 no.1
• /
• pp.19-25
• /
• 2007

To develop an efficient screening method for detection of the transgene in Chinese cabbage (Brassica rapa spp. pekinensis) utilizing Basta spray, optimal conditions for Basta application were examined in this study. Two transgenic Chinese cabbage lines were obtained through Agrobacterium-mediated transformation and used as transgenic positive controls in the Basta screening experiment. Differential concentrations of glufosinate-ammonium were sprayed into three different growth stages of 12 commercial Chinese cabbage cultivars. The results showed that no plants could survive higher than 0.05% glufosinate-ammonium, and plants at the 2-3 leaf stage were most vulnerable to glufosinate-ammonium. On the other hand, no damage was observed in the transgenic control plants. Reliability of the Basta spray method was proven by showing perfect co-segregation of the tolerance to glufosinate-ammonium and the presence of the bar gene in T₁ segregating populations of the transgenic lines, as revealed by both PCR and Southern blot analyses. Using the developed Basta screening method, we tried to investigate the transgene flow through pollen dispersal, but failed to detect any transgene-containing non-transgenic Chinese cabbages whose parents had been planted adjacent to transgenic Chinese cabbages in field conditions. However, the transgene was successfully detected using Basta spray from the non-transgenic plants bearing the transgene introduced by hand-pollination. Since the Basta spray method developed in this study is easy to apply and economical, it will be a valuable tool for understanding the mechanism of gene flow through pollen transfer and for establishing a biosafety test protocol for genetically modified (GM) Chinese cabbage cultivars.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.197-204
• /
• 2006

Recently, in order to realization of construction and economical saving, various studies are progressing. Also, the study on RCS system which is consisted of reinforced concrete column and steel beam is progressing actively. Actually, however, resisting mechanism of panel zone is influenced by transverse beams when the stress transfers inner panel to outer panel but existing literature didn't reflect the effect of transverse beams. This paper is to analyze the test result of five inner beam-column joints specimen with a variable such as web, flange thickness of transverse beam and face bearing plate(FBP) for RCS systems were tested under cyclic loadings conforming to NEHRP recommendation to investigate the effect of transverse beams and the structural performance of beam-column joints. From the test result, it was shown that transverse beams are effective to enhance the shear strength and structural performance of beam-column joints.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.309-320
• /
• 1999

Medial patellar luxation in dogs is one of the most common patellar problems presented to the veterinary practitioner. It is observed in toy and miniature breed and the majority of cases is a congenital form. Because of extensor mechanism's instability, it causes deformity and disorder in the growth of the affected limb when the luxation is left without treatment As lameness is not easily detectable in puppies, early diagnosis and correction are essential for therapy. Up to now, there has not been any reports refering to the diagnostic methods and the optimal age for correction in young dogs. Thirteen 45-90 days old puppies, have grade I and/or II medial patellar luxation. Only by palpation, all 13 dogs were diagnosed of patelar luxation. Skyline radiographic view was useful to interpret patellar morphology and depth of trochlear groove only above 60 days old. However, it was difficult to make definite diagnosis patellar luxation. The caudocranial and lateral radiographic view as well as ultrasonographic skyline view were not showed of patellar luxation. 2 puppies had unilateral patellar luxation and 11 puppies had bilateral patellar luxation which more serious on the left than on the right. Only 3 puppies among 11 puppies with bilateral patellar luxation were observed of lameness degree 1. Regardless of grade of patellar luxation and lameness, we performed trochlear chondroplasty using a U-shape sculpture blade to minimize cartilage injury, transposition of tibia tuberosity with No. 1 Supramid to align extensor mechanism and lateral imbrication. After surgery, we examined the operated animal daily for 10 days and on 15, 30 and 60 days after surgery respectively. After operation, pain and fever became normal on 7 days, swelling on 10 days, respectively. On 10 days after surgery, dogs showed normal standing position, and normal walking was observed in 15 days after surgery. In force plate analysis, the operated legs were normal weight bearing at 30 days after operation. After surgery, not only patellar luxation and clinical signs have been gradually reduced but also bone growth have become normal without showing growth physeal plate injury. The survival rate of puppies over 62 days old was 100%, while 42-45 days old 37.5%. The above results suggest that optimal age for surgical correction of congenital medial patellar luxation is recommended over 60 days old. In conclusion, combination of trochlear chondroplasty, transposition of tibia tuberosity, and lateral retinacular imbrication is appropriate for over 60 days old puppies to efficiently correct patellar luxation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.11
• /
• pp.4571-4576
• /
• 2015

Background: To investigate the inhibitory effect and the underlying mechanism of triptolide on cultured human endometrial carcinoma HEC-1B cells and corresponding xenograft. Materials and Methods: For in vitro studies, the inhibition effect of proliferation on HEC-1B cell by triptolide was determined by MTT assay; cell cycle and apoptosis of the triptolide-treated and untreated cells were detected by flow cytometry. For in vivo studies, a xenograft tumor model of human endometrial carcinoma was established using HEC-1B cells, then the tumor-bearing mice were treated with high, medium, and low-dose ($8{\mu}g$, $4{\mu}g$ and $2{\mu}g/day$) triptolide or cisplatin at $40{\mu}g/day$ or normal saline as control. The mice were treated for 10-15 days, during which body weight of the mice and volume of the xenograft were weighted. Then expression of Bcl-2 and vascular endothelial growth factor (VEGF) was analyzed by SABC immunohistochemistry. Results: Cell growth was significantly inhibited by triptolide as observed by an inverted phase contrast microscope; the results of MTT assay indicated that triptolide inhibits HEC-1B cell proliferation in a dose and time-dependent manner; flow cytometry showed that low concentration (5 ng/ml) of triptolide induces cell cycle arrest of HEC-1B cells mainly at S phase, while higher concentration (40 or 80 ng/ml) induced cell cycle arrest of HEC-1B cells mainly at G2/M phase, and apoptosis of the cells was also induced. High-dose triptolide showed a similar tumor-inhibitory effect as cisplatin (-50%); high-dose triptolide significantly inhibited Bcl-2 and VEGF expression in the xenograft model compared to normal saline control (P<0.05). Conclusions: triptolide inhibits HEC-1B cell growth both in vitro and in mouse xenograft model. Cell cycle of the tumor cells was arrested at S and G2/M phase, and the mechanism may involve induction of tumor cell apoptosis and inhibition of tumor angiogenesis.

• The Journal of Fisheries Business Administration
• /
• v.18 no.1
• /
• pp.59-97
• /
• 1987

Tuna and tuna fishing extend over most of the tropical waters of the world oceans, especially, this study of the Indian Ocean and the fish and the fishing vessels are highly mobile. No country can deal in isolation with the problems of its tuna fishery and of any tuna fishery in its waters, without collaborating with other countries. This cooperation is often best established through some formal international mechanism. The essential requirements are for information-on the resources, the fishery, the trade-and to identify where management actions are needed to consore the resources or to maintain the economic or social function of the fishery. These will also usually require some form of international mechanism. With the changes in the Law of the Sea, the siuuation in respect of management of tuna-considered among the highly migratory species, requirng special treatment-has also changed. At present there are both uncertainty regarding tuna management and political arguments as to how such management can be best implemented. Bearing this in mind, together with the fact that only few tuna stocks have shown clear evidence of serious depletion through over-exploitation, present emphasis will be placed on information requirements. This study included compiling the data necessary to review the state of stoks in the Indian Ocean tuna fishing grounds. Information on the resources-where the fish are, their quantity, their movements, etc. is important, whether in planning development of new fisheries, or considering the need for collaboration with other countries (in ascertaining to what extent their catches may affect catches of the natoinal fleet) or for conservation measures. A major source of information is the statistics of for conservation measures. A major source of information is the statistics of catch and fishing effort from existing commercial vessels. These need to be assembled for all fisheries on the same stock on an oceanwide basis. The statistical data also need to be analysed and intepreted, and combined with biological data(e.g., on growth, mortality and migration rates) to provide information that is intelligible and useful for administrators and other decision-makers. This must also be undertaken on a resource-wide or ocean-wide basis. Finally, because of the world-wide similarities in the methods of datching, processing and marketing fish, there is a particular tut not exclusive need in those countries just beginning to develop their tuna fisheries-to have ready access to a syntheis of information on tuna, tuna biology and tuna fisheries and tuna fisheries economics and management on the Indian Ocean.

• Korean Journal of Acupuncture
• /
• v.30 no.4
• /
• pp.220-229
• /
• 2013

Objectives : Electroacupuncture(EA) has been used effectively in producing analgesia on ankle sprain pain of humans and animals. Currently to examine the underlying mechanisms of the EA-induced analgesia, the effects of EA on weight-bearing forces(WBR) were examined at ankle sprain classified as grade 3 in rats. Methods : The severe ankle sprain classified as grade 3 was induced surgically by ankle ligament injury in the Sprague-Dawley rats. WBR of the affected foot were examined to evaluate effects and mechanism of EA(2 Hz, 1 ms pulse width, 2 mA intensity, for 15 min) which was applied to either SI6, GB34, or GB39 acupoints. The rats were pretreated with naltrexone(10 mg/kg, i.p.) as an opioid receptor antagonist or phentolamine(5 mg/kg, i.p) as an ${\alpha}$-adrenoceptor antagonist at 30 min before EA. Results : The daily repeat EA at either SI6, GB34, or GB39 showed significant analgesic effects on the severe ankle sprain. Particularly, daily EA at GB34 showed more potent analgesic effect than the others. In addition, the naltrexone pretreatment completely blocked the analgesic effect of EA at GB34, indicating the involvement of the endogenous opioid system in mediating the effect of EA at GB34. However, the phentolamine pretreament blocked analgesic effects of EA at either SI6 or GB39, indicating the involvement of ${\alpha}$-adrenoceptors in mediating the effect of EA at either SI6 or GB39. Conclusions : These data suggest that EA-induced analgesia on ankle sprain pain is mediated through either endogenous opioids or ${\alpha}$-adrenoceptors dependant on acupoint specific pattern.