• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.149-157
• /
• 2003

Deep sea core samples were taken in the southwestern part of the Ulleung Basin in order to characterize the properties of shallow gases in the sediment. Amount of shallow gases in the sediments were calculated by head space techniques, and chemical and isotopic compositions of hydrocarbon gases were analyzed. Geochemical analyses were carried out on the gas bearing sediments to find out relationship between natural gas contents and organic characteristics of the sediments. Seismic characteristics of shallow gases in the sediments were also examined in this study. The amount of the hydrocarbon gases in the sediments range from 0.01% to 11.25%. Calculation of volume of gas per volume of wet sediment varies from 0.1 to 82.0 ml HC/L wet sediment. Methane consists 98% of the total hydrocarbon gases except for two samples. Based on the methane content and isotopic composition$(\delta^{13}c)$: -94.31$\textperthousand$~-55.5$\textperthousand$), the hydrocarbon gases from the sediments are generated from bacterial activities of methanogenic microbes. Contents of hydrocarbon gases are variable from site to site. Volume of shallow gases in the sediments shows no apparent trends vs. either characteristics of organic matter or particle sizes of the sediments. Gas concentration is high in the area of seismic anomalies such as blanking zone or chimney structures in the section. Physicochemically the pore water and the formation water systems are saturated with gases in these areas. Concentration of hydrocarbon gases in the sediments in these area shows favorable condition for generation of gas hydrate, as far as the other conditions are satisfied.

• Journal of Korea Foundry Society
• /
• v.44 no.1
• /
• pp.9-15
• /
• 2024

In this study, in order to improve the lifespan of parts made of manganese steel, manganese steel was cast by varying the amount of Ti added to the steel. In order to confirm the characteristics of the cast material, processing characteristics including tensile and surface characteristics and bearing ratio were investigated. It was confirmed that when the amount of Ti added to high manganese steel exceeds 0.5%, the strength of the alloy is improved due to grain refinement, and fine carbides are formed inside the steel. This results in increased resistance to surface wear compared to the alloy with only Mn added. There was no significant difference in the increase in tensile strength as the Ti content in manganese steel was increased. However, inclusion of Ti showed a small but greater effect on wear resistance compared to Mn, and the size and the distribution of carbides become coarse depending on the Ti content. and was evenly distributed. It was confirmed that the strength and surface properties of manganese steel can be improved by the addition of Ti to improve the lifespan of parts made with this steel. It was found that Ti is effective in developing materials with excellent wear resistance due to refinement of dendrite crystal grains. In the samples where Ti was added, the carbide appears to increase the resistance to surface roughness, and due to the nature of Mn steel, surface hardening begins to occur, which appears to extend the life.

• Economic and Environmental Geology
• /
• v.57 no.4
• /
• pp.449-471
• /
• 2024

We investigated the radiometric ages and petrological characteristics of basaltic rocks with columnar joints, basalt gorge, pillow lava, and mantle xenolith, from the geoheritages designated as Natural Monuments of Korea in recognition of their historical, academic, and scenic excellence. A total of 7 Natural Monuments were selected. They are 'Basalt gorge along Daegyocheon Stream of Hantangang River', 'Basalt gorge and Bidulginangpokpo Falls of Hantangang River, Pocheon', 'Pillow lava in Auraji, Pocheon' distributed along the Chugaryeong Fault System, 'Peridotite xenolith-bearing basalt in Jinchon-ri Baengnyeongdo Island, Ongjin', 'Columnar joint in Daljeon-ri, Pohang', 'Columnar joint in Yangnam, Gyeongju', and 'Columnar joint along Jungmun and Daepo Coasts, Jeju'. They ranged in age from the Cenozoic Neogene Miocene to the Quarternary Pleistocene. Based on the composition of major elements, Hantangang Basalt corresponded to trachybasalt, Daljeon Basalt to phonotephrite, Eoil Basalt to sub-alkaline basalt, and Daepodong Basalt to alkaline basalt. And in the composition of trace and rare earth elements, only Eoil Basalt showed the characteristics of arc basalt, while the others showed the characteristics of oceanic island basalt.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.37-47
• /
• 2017

In this study, a series of full-scale field tests on prebored and precast steel pipe piles and the corresponding numerical analysis have been conducted in order to study the characteristics of pile load-settlement relations and shear stress transfer at the pile-soil interface. Dynamic pile load tests (EOID and restrike) have been performed on the piles and the estimated design pile loads from EOID and restrike tests were analysed. Class-A type numerical analyses conducted prior to the pile loading tests were 56~105%, 65~121% and 38~142% respectively of those obtained from static load tests. In addition, design loads estimated from the restrike tests indicate increases of 12~60% compared to those estimated in the EOID tests. The EOID tests show large end bearing capacity while the restrike tests demonstrate increased skin friction. When impact energy is insufficient during the restrike tests, the end bearing capacity may be underestimated. It has been found that total pile capacity would be reasonably estimated if skin friction from the restrike tests and end bearing capacity from the EOID are combined. The load-settlement relation measured from the static pile load tests and estimated from the numerical modelling is in general agreement until yielding occurs, after which results from the numerical analyses substantially deviated away from those obtained from the static load tests. The measured pile behaviour from the static load tests shows somewhat similar behaviour of perfectly-elastic plastic materials after yielding with a small increase in the pile load, while the numerical analyses demonstrates a gradual increase in the pile load associated with strain hardening approaching ultimate pile load. It has been discussed that the load-settlement relation mainly depends upon the stiffness of the ground, whilst the shear transfer mechanism depends on shear strength parameters.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.3 s.31
• /
• pp.285-295
• /
• 1990

The utilization of medical care services has been partly regionalized with the implementation of referral requirement by the government since July 1, 1989 when the health insurance coverage was extended to all the people. For the purpose of regionalization, the whole country has been primarily divided into tertiary care regions, and each of them again into secondary care regions. This study investigates the self-sufficiency for in-patient care services of secondary care regions focusing on why it varies among the regions. In doing so, analysis is performed to examine a model which embodies three sets of hypotheses as follows : 1) The regional self-sufficiency for medical care services would be subject to direct influences of regional characteristics, amount of available services and structural properties of regional medical care system ; 2) The regional characteristics would have indirect effects on the self-sufficiency which are mediated by medical care services ; and 3) The amount of available services would indirectly affect the self-sufficiency by influencing the structure of regional medical care system. The results of analysis were generally consistent with the model. The findings have some practical implications. The regional self-sufficiency for medical care services partly depends upon basic properties of each region which cannot be changed in a short period of time. Thus the self-sufficiency for medical care services can be improved mainly by health policy measures. In some of the regions the self-sufficiency for in-patient care services was much higher or lower than can be predicted from the bed-population ratio. Indication is that the allocation of health resources should be made considering a variety of factors bearing upon the supply of and demand for health care ; not on the basis of just a single criterion like the availability. The self-sufficiency of a certain region is related to not only its own characterstics but also the characteristics of neighboring regions. Therefore, attention should be also directed to the inter-regional relationships in health care when the needs for investment of health resources in a region are assessed. However, it should be noted that this study used the data collected before the referral requirement was imposed. A replication of this analysis using recent data would provide an evaluation of the impact on the self-sufficiency of the referral requirement as well as a confirmation of the findings of this study.

• The Korean Journal of Malacology
• /
• v.32 no.2
• /
• pp.133-139
• /
• 2016

The incubation time required for hatching of O. ocellatus were investigated through the processes of egg and embryonic developments by the dissecting microscopic and visual observations. And differences in ecological characteristics of the plankton mode of life or the benthic mode of life according to total numbers of the suckers on each short arm of the hatched juvenile larvae of O. ocellatus were studied by comparisons with other octopodidae species. Compared with the recent a few results reported by other researchers associated with the incubation time required for hatching by female adult mother of O. minor (73-90 days after spawning at $20.9-21.5^{\circ}C$ ranges), in this study, the incubation time required for hatching by female adult mother of O. ocellatus was 56-57 days after spawning at $11.0-20.4^{\circ}C$. Therefore, the incubation time required for hatching by female adult mother varied with Octopodidae species. In this studies, each ovarian egg laid by a female was connected to an egg string attaching to the surface of the wall or bottom of vacunt shell of Rapana venosa. Egg and embryonic developments of this species were studied in the indoor aquaria, in the specific gravity ranging 1.024-1.025. the hatched juvenile of O. ocellatus is 10.3 mm in the mean total length and 4.5 mm in mantle length, and each of its short arms has 18-20 suckers. The just hatched juvenile larvae of O. ocellatus enter the benthic mode of life (benthic larval stage) after hatching. In particular, regarding differences in ecological characteristics of the mode of life according to total numbers of the suckers, O. vulgaris may not need to have many suckers because they enter the planktonic mode of life after hatching, however O. ocellatus may need to have many suckers, because they should adapt to the benthic mode of life. And also the just hatched juvenile larvae of O. minor (bearing many suckers more than O. ocellatus) enter the benthic mode of life (benthic larval stage) after hatching. Therefore, the total number of the suckers on each short arm of the hatched juvenile larvae can be used for determining whether an octopus species has planktonic larval stages or benthic larval stage (benthic mode of life). In particular, The intracohort cannibalism phenomena appeared at the hatched juvenile larval stage because the larval stage of O. ocellatus and O. minor enter into the benthic larval stage in the early stage, unlike entering into the plaktonic larval stage in other Octopus species such as O. vulgaris: at this time, the early hatched larvae fed the late hatched larvae (they are the same species and almost same ages). Therefore, the intracohort cannibalism pheneomena occur in the just hatched juvenile stage of only O. ocellatus and O. minor.

• Korean Journal of Plant Resources
• /
• v.16 no.2
• /
• pp.123-129
• /
• 2003

This study was conducted to determine the germination characteristics, oil contents and fatty acid compositions of the different safflower accessions. The safflower accessions had nearly the same germination period of about 12-13 days and the germination rate was more than 87.5%. Plant height grew until 84 days after seeding. The number of leaves did not increase after 70 days from seeding. The accessions had a difference of six loaves from 17 to 23 loaves. Flowering time had a difference of 11 days from 79 days after planting to 90 days after planting. The Jangsung accession had the shortest flowering time of 79 days after planting. In the characteristics of bearing fruit, the number of branches including main stem are from 4.7 to 8.8. The number of head flowers had nearly the same number of branches which were 4.8-8.9, numbers of seed per head flower were 29.3-49.1 and the weight of 100 seeds were 2.9-3.9 g. The crude fat content was 21.8-33.9％ and fatty acid content was 66.6-77.6% containing mostly linolenic acid. Oeic acid content was 9.2-16.5% and it contained palmitic acid, stearic acid, venin acid, arachidonic acid etc. Results of this study, the accession Jangsung, which had the shortest flowering time and had the most crude fat content, was observed to be the best accession for the breeding of safflower.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.121-134
• /
• 1974

This study is an attempt to evaluate the use of an oral contraceptive by: 1. Deforming the acceptance rate of the oral contraceptive according to socio-demographic characteristics 5. Estimating the duration of the use of the contraceptive f. Discovering reasons why the contraceptive was discontinued 4. Computing the cumulative continuation and discontinuation rate according to socio-demographic characteristics, history of pregnancies, and attitude of husband at the time of selection of the contraceptive. One hundred sixty-eight women of child bearing age (14-49 years), residing in Yonhee Dong, Seoul, Korea and registered as oral contraceptive accepters at Yonsei Community Health Center, were interviewed during a three week period in 1973. The questionnaire was designed to determine the socio-demographic characteristics of the oral contraceptive accepters, the current status of their family planning practice, medical reactions if any, discontinuation practice, and the duration of the use of the contraceptive. The major findings of the study were as follows; 1. The acceptance rate was highest for women between 30 and 34 years of age, the mean age being 34.4 years. 2. Fifty six point five percent of all respondents said that thirty years of age was the ideal age to stop having children. 3. The average number of living children was 3.5 and fifty four point eight percent of respondents felt 2 boys and I girl was the ideal number of children. 4. The average number of pregnancies was 5.2 and the average number of induced abortion was I. 4. 5. Fifty eight point eight percent of the respondents had experience in the use of contraceptive methods in the past. 6. Forty one point seven percent of the respondents replied that they chose the oral contraceptive because, "it was not complicated to use." 7. Sixty four point eight percent of the women said their husband approved of their taking the pill. 8. The cumulative discontinuation rate was sixty point five percent of the total respondents for one year in first segment. 9. Sixty six point nine percent of the respondents had experienced side-effect while using the pill. The side effects for 68.9 percent of these women were castro-intestinal upsets. Twenty point eight percent of the women who had side effects consulted with medical personnel about them. Women who had more education had more side effects. 10. Seventy three point two percent of the women who discontinued the pill did so because of medical reasons. Women who were younger discontinued the pill for personal reasons more-often than older women. Among personal reasons listed for discontinuing the pill was the attitude of the husband. 11. The average duration of continuance of the contraceptive was 5.3 cycles under 29 years of age; 7.4 cycles between 30 and 34 years of age; and 8.4 cycles over 40 years of age. 12. The discontinuation rate was seem to increase sharply in the early cycle and increase more slowly in later cycle. Conclusions and suggestions: Since the attitude of the husband was shown to be important, the current family planning program should be expended to include approach to husband. For women who must use the oral contraceptive, education and support must be enhanced so that the discontinuation rate due to side effects will be decreased.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.487-498
• /
• 2004

There is an increasing trend of construction works in mountainous areas by the urban development in Busan that is mainly composed of mountains. The study area, Hwangryeong Mt., is one of developing sites in the urban area, too. Landslides and cut-slope failures that occur large damages of human beings and the properties are influenced by soil characteristics as well as rock properties. This study analyzed geotechnical characteristics of soil dependent on geology at Hwangryeong Mt. where a large slope failure had been occurred in 1999. Geology of the study area is composed of the Cretaceous sedimentary rocks and volcanic rocks. Soil layer of the slopes can be grouped into sand mixed with clay and silt. The cohesion is plotted between $0.001\;and\;0.066kg/cm^2$. The friction angles are distributed in the ranges between $32^{\circ}\;and\;39^{\circ}$, meaning soil bearing a high friction angle. The permeability coefficients are plotted between $2.34\times10^{-4}cm/sec\;and\;2.58\times10^{-2}cm/sec$, indicating fine sand and loose silt with a medium grade of permeability. The sedimentary rocks area shows relatively higher permeability coefficients than those volcanic rocks area.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.5
• /
• pp.33-39
• /
• 2013

A drilling exploration in deep sea is being processed to develop new energy resource in the world. In 2007, the presence of the gas hydrate had been confirmed during the UBGH1 (Ulleung Basin Gas Hydrate Expedition 1) in the Ulleung Basin. Geotechnical properties of the deep marine sediment are important factors for assessing the safety of gas production facility and productivity from the hydrate bearing sediment. In this study, comprehensive laboratory tests are conducted to investigate the geotechnical engineering characteristics of the deep marine sediments recovered from the hydrate occurrence regions during the UBGH2 (Ulleung Basin Gas Hydrate Expedition 2) in the Ulleung Basin, East Sea, Korea. The index properties of the specimens including the specific gravity, atterberg limits, specific surface, and particle size distribution are measured, and these are compared to the results reported by previous studies. A zero-lateral strain cell, which houses bender elements, is used to determine stress-dependant characteristics and shear wave velocities with the vertical effective stresses. Furthermore, the hydraulic conductivity is calculated based on the consolidation test results.