• Bulletin of the Korean Chemical Society
• /
• v.19 no.7
• /
• pp.738-742
• /
• 1998

A new polyamide was prepared from 4,4'-(hexafluoroisopropylidene)di-aniline and 4-[NN-bis(2-carboxyethyl)] amino-4'-nitrostilbene. This polymer was cast into thin films by spin coating cyclohexanone solution. After being poled, the electro-optic coefficients of electrode poled polymer films were measured by the reflection measurement technique using an incident laser beam of 1.3 Jim. The film poled at the field strength of 1.2 V/μm exhibited the electro-optic coefficient (r33) of 5.9 pm/V. The relaxation behavior of the poled polymer film was compared with other reported polymers bearing the same NLO chromophores. Due to stiff and highly polar nature of the backbone and also due to formation of interchain hydrogen bonds, this polymer reveals a slower relaxation characteristics. The polymer is amorphous and soluble in various organic solvents.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.227-235
• /
• 2021

A criterion and a method for solving a problem on the prevention of mine working fracture under the action of tectonic and gravitational forces are offered. Based on minimal criterion, theoretical analysis of the definition of the optimal shape of working in the rock mass weakened by arbitrarily located rectilinear cracks was carried out. A closed system of algebraic equations allowing to minimize the stress state and stress intensity factors depending on mechanical and geometrical characteristics of the rock, is constructed. The relation between the shape of the working and the stress intensity factors and also location and sizes of the cracks is obtained. The found optimal shape of working increases load-bearing capacity of the rock.

• Geomechanics and Engineering
• /
• v.32 no.5
• /
• pp.541-551
• /
• 2023

Snap-buckling is one of the main failure modes of structures, because it will lead to the reduction of structural bearing capacity, durability loss and even structural damage. Boundary condition plays an important role in the research of engineering mechanics. Further discussion on the boundary conditions problems will help to analyze the dynamic and static behavior of structures more accurately. Therefore, in order to understand the dynamic and static behavior of curved beams more comprehensively, this paper mainly studies the nonlinear snap-through buckling and forced vibration characteristics of functionally graded graphene reinforced composites (FG-GPLRCs) curved beams with two different boundary conditions (including clamped-hinged and hinged-hinged) using Euler-Bernoulli beam theory (E-BBT). In addition, the effects of the curved beam radius, the GLPs distributions, number of GLPs layers, the mass fraction of GLPs and elastic foundation parameters on the nonlinear snap-through buckling and forced vibration behavior are discussed respectively.

• Animal Systematics, Evolution and Diversity
• /
• v.22 no.2
• /
• pp.209-215
• /
• 2006

Two rare ciliates from soil under the oak tree and mosses in the top of mountain in Korea were identified as Gonostomum algicola Gellert, 1942 and G. gonostomoida (Hemberger, 1985), respectively. There is little information on their morphological features, therefore their detailed redescriptions are needed. The description was based on the observation of living and protargol impregnated specimens, and biometric analysis. Their diagnostic characteristics are as follows. Gonostomum algicola; $88-113\times30-40{\mu}m$ in vivo, colourless cortical granules, 20-31 adoral membranelles, two fronto-terminal cirri, five fronto-ventral cirri, no mid-ventral cirri, two transverse cirri, two to three micronuceli. Gonostomum gonostomoida; $60-121\times21-40{\mu}m$ in vivo, no cortical granules, 27-34 adoral membranelles, no fronto-terminal cirri, two fronto-ventral cirral rows with each row bearing three cirri, midventral cirral row with 11-14 cirri, two to three transverse cirri, one to six micronuceli. So far, total three species within the genus Gonostomum have been recorded from Korea by the present study.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.3
• /
• pp.191-197
• /
• 1993

In this paper, experimental studies are mainly carried out for the evaluation of precision cutting performance of a machine tool spincle running at high speed with the low load, in consideration of the bending vibration characteristics. As a result a process in presented for the practical application in the machine tools industry to evaluate the cutting performance in design stage of spindles.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.43-51
• /
• 2014

Organic matter in dredged soil has a lot of engineering problem in ground including a large settlement, crack propagation, low bearing capacity and low friction angle. From an agricultural point of view, however, organic matter contributes greatly soil quality and plant health. This paper investigated the relationship between engineering and germination characteristics of stabilized mixture consisting of different ratios of organic content (0 %, 10 %, 20 %, 30 %) for recycling dredged soil including organic matter. Several series of laboratory tests such as flow test, unconfined compressive test and consolidation test were performed to find out engineering characteristics. pH, percent of germination and growth of plants were also measured to investigate the germination characteristics. The experimental results indicated that, as organic content increased, unconfined compressive stress decreased and compression and swelling indices increased. However, percent of germination and plant growth increases as organic content increases.

• Tribology and Lubricants
• /
• v.28 no.3
• /
• pp.136-141
• /
• 2012

In this paper, we investigated the friction characteristics of $W100^{\circ}{\o}L25m$ ellipse type surface pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various velocities and other conditions. The reduction of friction is a necessary requirement for the improved efficiency of industrial parts. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic in low velocity, with substantially little change to density. Conversely, as the load increases, the test direction of ellipse type dimple pattern, resulting in a difference in the texture of these two components. At a dimple density of 7.5% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.187-194
• /
• 1986

Present stadies were carried out to obtain fundermental data for effective management of the soils by investigating the physicochemical characteristics rubber fiber, humification grade and bearing power of peats and muck which were included in Geongdeog series, and Gimje series in Honam area. The results abtained were as follows; 1. Humification grade of peats were about 23, while that of muck soils was about 45-71 and those were higher in Gimje series than Bongnam series. 2. The organic tiers which humification grade was higher were high pH, bulk density, and contents of K, $P_2O_5$, B.S and while were low OM, T-C, T-N, Na, $SiO_2$ and rubbed fiber. 3. In peats and mucks, bulk density, pH, contents of T-N $P_2O_5$ and ash were negatively correlated with rubbed fiber and OM, CEC, T-C, PAC, C/N, C/P were positively correlated with one, while these physicochemical characteristics were oppositely correlated with humification grade. 4. Cone bearing power of each soil tiers was low in every Geongdeog series which had the thick organic tiers and showed poorly drainage and it was the highest in Gimje series which was similar to in organic soils because of its thin organic tiers.

• Korean Journal of Plant Resources
• /
• v.37 no.1
• /
• pp.87-92
• /
• 2024

'Miha' is a new strawberry (Fragaria x ananassa Duch.) cultivar, which was released by the Highland Agriculture Research Institute in 2019. The 'Miha' cultivar originates from a 2014 cross between 'Monterey' and 'Saebong No. 3', both of which exhibited excellent ever-bearing characteristics, including continuous flowering and large fruits under long-day and high temperature conditions. This new cultivar was initially named 'Saebong No. 12' after examining its characteristics and productivity during summer cultivation between 2015 and 2019. After regional adaptability tests, 'Miha' was selected from 'Saebong No. 12' as an elite cultivar. The general characteristics of 'Miha' include intermediate, elliptic leaves, and strong growth. The fruits are conical and of a dark-red color. The number of leaves of 'Miha' was 21.9, which was 6.2 fewer than that of the control cultivar, 'Goha' with 28.1. The number of flower clusters of 'Miha' was similar to that of 'Goha'. The average fruit weight of 'Miha' was 13.4 g, which was 4.3 g heavier than that of 'Goha'. The fruit hardness of 'Miha' was 36.2 g·mm^-2, which was 10.1 g·mm^-2 harder than that of 'Goha'. The marketable yield of 'Miha' was 37,393 kg·ha^-1, 156% more than that of 'Goha' with 23,970 kg·ha^-1. Therefore, the new cultivar of ever-bearing strawberry 'Miha' is expected to be very popular in the export or bakery market because it is hard.

• Korean Journal of Plant Resources
• /
• v.37 no.4
• /
• pp.386-391
• /
• 2024

'Jinha' is a new strawberry (Fragaria × ananassa Duch.) cultivar, which was released by the Highland Agriculture Research Institute in 2019. The 'Jinha' cultivar originates from a 2011 cross between 'Albion' and 'Goha,' both of which exhibited excellent ever-bearing characteristics, including continuous flowering and large fruits under long-day and high temperature conditions. This new cultivar was initially named 'Saebong No. 11' after examining its characteristics and productivity during summer cultivation between 2012 and 2016. After regional adaptability tests, 'Jinha' was selected from 'Saebong No. 11' as an elite cultivar. The general characteristics of 'Jinha' include intermediate, elliptic leaves, and medium growth. The fruits are conical and of a red color. The plant height of 'Jinha' is simiar to that of the control variety, 'Flamenco', but it has a lot of number of leaves. The cluster length of 'Jinha' was 35.5 cm, 10.8 cm longer than 24.7 cm of the control variety. The number of flower clusters of 'Jinha' appeared 14.4, which was 4.1 more than that of 'Flamenco'. The average fruit weight of 'Jinha' was 10.1 g, which was 0.8 g heavier than that of 'Flamenco'. The soluble solid content of 'Jinha' was 10.2 °Brix, which was 2.0 °Brix higher than that of 'Flamenco'. The marketable yield of 'Jinha' was 25,931 kg·ha^-1, 440% more than that of 'Flamenco' with 5,900 kg·ha^-1. Therefore, the new cultivar of ever-bearing strawberry 'Jinha' is expected to be very popular in the export or bakery market because it is high soluble solid content and good shape.