• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.784-787
• /
• 2012

'Gwanha' is new strawberry (Fragaria ${\times}$ ananassa Duch.) cultivar, which was released by Highland Agriculture Research Center, Rural Development Administration, in 2011. In 2007, this cultivar was originated from a cross between 'Sucambodiaberry' and 'Selva' that showed excellent ever-bearing characteristics including continuous pink flowering habit under long-day and high temperature condition. It was named 'Saebong No.4' after examining its characteristic and productivity in summer culture from 2009 to 2011. After characteristic and productivity test in 2011, 'Gwanha' was selected as an elite cultivar. The general characteristics of 'Gwanha' include spreading type, middle vigor, elliptic leaf, and long cluster in growth. The fruit shape is wedge, and the red fruit is edible and unique among the domestic ornamental strawberry cultivars. Flower color of 'Gwanha' is pink, and flower cluster is more appearance than 'Pinkpanda'. The average fruit weight of 'Gwanha' is about 7.8 g and the marketable yield is relatively low because of low marketable rate. It is resistant against fusarium wilt. 'Gwanha' is suitable for four season cultivation as an ornamental strawberry cultivar because it shows continuous flowering habit under long-day and high temperature condition.

• Tribology and Lubricants
• /
• v.28 no.3
• /
• pp.136-141
• /
• 2012

In this paper, we investigated the friction characteristics of $W100^{\circ}{\o}L25m$ ellipse type surface pattern, on bearing steel. These characteristics are researched by utilizing a pin-on-disk wear test machine, under various velocities and other conditions. The reduction of friction is a necessary requirement for the improved efficiency of industrial parts. As the speed increases, there is a decrease in the effect of the dimple of friction characteristic in low velocity, with substantially little change to density. Conversely, as the load increases, the test direction of ellipse type dimple pattern, resulting in a difference in the texture of these two components. At a dimple density of 7.5% the friction characteristic is easily demonstrated, with a consistent change in both speed and load.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.309-313
• /
• 2006

Many researchers have studied on the lightness of automobile. These researches are such as a body shell, sub frame, fuel tank, engine etc. The transmission Part is a magnitude one in the aspect of weight. A drive shaft (propeller shaft) transmits the engine power to rear differential gear assembly. It is used in the compact car that is a single drive shaft. But in the case of long body cars such as SUV (Sports Utility Vehicle), truck and large vehicle, two or three divided drive shaft are used to prevent the vibration damage from a drive shaft that has been taken high torsion and rotation. This multi-divided drive shaft structure is so heavy because it is assembled by yoke, center bearing and solid spline axis. When the rear axle move up and down, the spline shaft adjust the variation of a length between the transmission and rear axle gearbox. In this paper, it is studied in the experimental method that is a bending vibration characteristic of slip in tube shaped propeller shaft. This type propeller shaft is developed to combine the spline axis with drive shaft and can be light in weight of transmission part.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.144-158
• /
• 1998

In order to study basic information on the developed electro-magnetic compass, experiments were carried out on board M. S. KAYA at the pier of Dong Kuk Steel Mill in Pusan and the Korean southern sea using a three-axis magnetic sensor from Jan. 21, 1995 to Feb. 14, 1996. The obtained results were as follows : 1. The amount of old metal on the pier was about 27,290tons~57,440tons with an average of 40,560tons, the artificial local disturbance at the pier was min. 27.1$\mu$T, max. 66.5$\mu$T, ave. 433$\mu$T for the horizontal component and min. -27.0$\mu$T, max. 45.1$\mu$T, ave. 3.7$\mu$T for the vertical component. Its direction of horizontal component was 305$^{\circ}$ with the ship's head up bearing at 225$^{\circ}$. 2. The ship's magnetic distribution on the starboard side on berthing at the pier was 17.4$\mu$T for the horizontal component and -6.2$\mu$T for the vertical component. On the ship's port side, it was 19.8$\mu$T for the horizontal component and 4.1$\mu$T for the vertical component. On the ship's starboard side at sea, the ship's magnetic distribution was 19.2$\mu$T for the horizontal component and 3.2$\mu$T for the vertical component. On the ship's port side, the readings were 22.0$\mu$T for the horizontal component and -1.8$\mu$T for the vertical component. The directions of these readings were nearly starboard side. 3. On the pier, the secular change of the artificial local disturbance decreased 8.3$\mu$T from 61.0$\mu$T to 52.7$\mu$T for the horizontal component and decreased 7.1$\mu$T from 8.9$\mu$T M 1.8$\mu$T for the vertical component. On the starboard side from its berth, the ship, s magnetic distribution increased 2.6$\mu$T from 14.8$\mu$T to 17.4$\mu$T for the horizontal component and increased -0.1$\mu$T from -6.1$\mu$T to -6.2$\mu$T for the vertical component. On the ship's port side from its berth, it increased 7.1$\mu$T from 12.7$\mu$T to 19.8$\mu$T for the horizontal component and increased 10.2$\mu$T from -6.1$\mu$T to 4.1$\mu$T for the vertical component. 4. While at sea, on the ship's starboard side, the Secular change of the ship's magnetic distribution increased 3.9$\mu$T from 15.3$\mu$T to 19.2$\mu$T for the horizontal component and increased 2.0$\mu$T from -5.2$\mu$T to -3.2$\mu$T for the vertical component. On the port side, the changes increased 11.4$\mu$T from 10.6$\mu$T to 22.0$\mu$T for the horizontal component and increased 4.9$\mu$T from -6.7$\mu$T to -1.8$\mu$T for the vertical component. Upon berthing at the pier, the deviation of the secular change increased westerly 1 degree W~ 2.5$^{\circ}$ W from 3.5$^{\circ}$ W~ 5$^{\circ}$ W M 6W with the ship's head up bearing at 225$^{\circ}$. While at sea, these increased westerly 2$^{\circ}$ ~ 3$^{\circ}$ from the Northeast to the South and increased easterly 1$^{\circ}$ ~ 8$^{\circ}$ from the Southwest to the North. 5. While at port, within 1 mile between the ship and berth of the pier, as we approached the pier, the westerly deviation increased and when we departed the pier easterly deviation increased. When approaching the pier, the deviation was smaller than the deviation when the ship was departing from the pier. When approaching the bearing at 225$^{\circ}$ with the ship's head up bearing, the varies of deviation was smaller than the varies when the ship's head up bearing was departing from it.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1764-1773
• /
• 2011

This study is about how to handle very soft grounds consisted of coal and household garbage(organic soil), clay, silt and so on, through examining Seoul-Busan High-Speed railway 6-2nd section. The soft soil might induce long term settlement and lead to structure's differential settlement eventually. So, we performed the boring test for characteristic of railway ground, laboratory test and field survey for mechanical property. And we also collected the engineering data of ground and the data for the establishment arrangement. These data were examined thoroughly considering residual settlement and strength by high-speed railway design standard. As a result of this study, we can say high-speed railway ground must have enough bearing capacity and be settled under allowable residual settlement(10cm). And also it needs to replace soft ground with high quality sand for the fundamental solution. With the application of replacement method on this study, we expect enough condition to construct stable high-speed railway.

• Economic and Environmental Geology
• /
• v.22 no.2
• /
• pp.103-115
• /
• 1989

The Tongyoung deposits are epithermal gold and silver bearing quartz-rhodochrosite vein type deposits of late Cretaceous. They occurs in the andesite and tuff breccia member called Gyeongsang basin. Four mineralizations can be distinguished at the mine based on macrostructures. From earlist stage to lastest stage they are: stage I, base-metal quartz vein; stage II, rhodochrosite vein (IIA) and Pb-Zn vein (IIB); stage III, barren quartz vein; stage IV, calcite-ankeritic rhodochrosite veins. Gold and silver mineralizations occur predominantly in the stage I and IIB. Electrum is closely associated with galena, sphalerite and pyrite, and has chemical compositions of 50.98-64.05 atom % Ag. Sphalerite contains 2.09-5.05 mol % FeS and 0.34-2.01 mol % MnS in the stage I, and 2.01-3.41 mol % FeS and 0.21-2.80 mol % MnS in the stage IIB. The FeS and MnS contents are in general correlated, and shows a characteristic zonal arrangement of electrum. It reveals rhat FeS contents of sphalerite which precipitated before electrum, gradually decreases in a grain during its deposition ranging from about 3.3 to 2 mol %. It may be considered from the above data that an increase of $fs_2$ caused by the oxidation of ore forming fluid is more important that the decrease of temperature.

• Tribology and Lubricants
• /
• v.25 no.5
• /
• pp.318-323
• /
• 2009

The oil characteristics and wear particles of Diesel engines with a DPF have been investigated as a function of a driving distance. The engine oil of SAE 5W30 with ACEA C3 is used for an oil film lubrication of the engine, which is equipped with Diesel particulate filter. Depending on the oil test results, the kinematic viscosity of used engine oils at 40 is degraded up to 5.1% compared with that of unused engine oils, SAE 5W30. And the kinematic viscosity of used engine oils at 100 is more degraded up to 8.1% compared with that of unused engine oils. The oil characteristic as a function of a mileage is not changed depending on the driving distance because of high quality of engine oils. But the aluminum and copper compounds, which are used as base materials of the engine bearing and a pin bush, are much worn and contaminated for the increased mileage of the car. The oil properties of used engine oils are relatively good except phosphorus and calcium additives, which are heavily engaged in the performance of the oils.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.4
• /
• pp.197-206
• /
• 2003

A new type of breakwater, which can be applicable to soft ground without special treatment because of its light self weight and structural characteristic of bottom wall, has recently been developed. The objective of this study is to propose an evaluation method of safety factor for the new type of breakwater considering 3 categories of sliding, overturning, and bearing capacity. Previous method for gravity type of breakwater was modified and the proposed method was verified by comparing the safety factors with maximum lateral displacements, which were obtained from finite element analysis for various types of breakwaters and ground conditions. The results showed the newly proposed evaluation method of safety factors could reasonably be utilized.

• International Journal of Automotive Technology
• /
• v.8 no.4
• /
• pp.429-436
• /
• 2007

In this study, we improved control performance of an EMV (electromechanical valve) system using a PM/EM (permanent magnet/electromagnet) hybrid EMA (electromagnetic actuator) and showed the feasibilities of both soft landing and fast transition of the EMV system using a simple PID control. The conventional EMV systems using only EM show significant nonlinear characteristics. Therefore, it is very difficult to control the valve position and several complex control schemes are used. This paper focused on the control performance improvement using a PM/EM hybrid actuator. In particular, a PM is used as a key design parameter such as a bias current of a magnetic bearing in order to improve the linear characteristic of the actuator, although most PM/EM hybrid actuators use a PM as a power saver during valve-open and -closed states. First, a FE (finite element) analysis was performed to confirm its linear static force characteristics. Then, both a test rig and a valve control system were built in order to prove experimentally the control performance improvement of the actuator. Finally, feasibilities of both soft landing and fast transition of the system were shown experimentally through gain-scheduled PID (proportional derivative integral) control.

• Journal of the Korean housing association
• /
• v.13 no.3
• /
• pp.61-69
• /
• 2002

This research is to analyze the spatial organization of a traditional rural community and its characteristics, the case of Hanbam village located in the north of Daegu city. The conclusions of this study are as follows; 1. The difference between private space and public space in the residential area of Hanbam village is obvious, and these two spaces are organically related each other by means of road. These spaces have some spatial characteristics of organization, such as center, hierarchy and sequence. 2. The private space consists of a residence module and a farming area in the settlement, and it is clearly farmed by the firm fence of rocks and by surrounding roads. Fruit-bearing trees such as Pyrus pyrifolia, Cornus officinalis, Diospyros kaki, Juglans sinensis are planted at the boundary. And most of residences are composed of a building, a inner court and farming fields. 3. The public space for the community mainly functions as ‘a meeting place’for residents, and consists of recreational spaces, ceremonial spaces, community facilities, and social facilities. Among these, Jeong-ja(pavilion), Seong-an Soop(forest) and Dae-chong(building for common use) are of great cultural value as important traditional spaces. 4. Two kinds of road are commonly fecund in the village; spontaneously generated one and planned one. This is straight inner streets and access paths to the village, and that is curvilinear alleys which are connected to Dae-chong, the core of village. Also stone walls and climbing plants on them are major elements of village landscape.