• 한국전산구조공학회논문집
• /
• 제20권6호
• /
• pp.691-697
• /
• 2007

보 구조물의 고유치 해석의 경우 보 이론에 근거한 기존의 다양한 방법들을 통해 효율적이고 수월하게 수행이 가능하다. 하지만 보의 단면이 두 가지 이상의 복합재질로 구성되어 있을 경우 전통적인 보 이론을 적용하기 위해서는 단일의 등가 물성을 산출해야할 필요가 있다. 본 논문에서는 복합단면 보 구조물의 효율적인 유한요소 고유치 해석을 위해 등가의 물성을 산출하였다. 이론 연구를 토대로 개발한 연구용 프로그램으로 대표적인 보 구조물에 대한 유한요소 고유치 해석을 수행하였으며, 해석결과에 대한 신뢰성 검증을 위해 상용 소프트웨어인 ANSYS의 3차원 솔리드 모델의 해석결과와 비교하였다.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.571-583
• /
• 2017

A kind of accordion-web RBS connection, "Tubular Web RBS (TW-RBS)" connection is proposed in this research. TW-RBS is made by replacing a part of web with a tube at the desirable location of the beam plastic hinge. This paper presents first a numerical study under cyclic load using ABAQUS finite element software. A test specimen is used for calibration and comparison of numerical results. Obtained results indicated that TW-RBS would reduce contribution of the beam web to the whole moment strength and creates a ductile fuse far from components of the beam-to-column connection. Besides, TW-RBS connection can increase story drift capacity up to 9% in the case of shallow beams which is much more than those stipulated by the current seismic codes. Furthermore, the tubular web like corrugated sheet can improve both the out-of-plane stiffness of the beam longitudinal axis and the flange stability condition due to the smaller width to thickness ratio of the beam flange in the plastic hinge region. Thus, the tubular web in the plastic hinge region improves lateral-torsional buckling stability of the beam as just local buckling of the beam flange at the center of the reduced section was observed during the tests. Also change of direction of strain in arc shape of the tubular web section is smaller than the accordion webs with sharp corners therefore the tubular web provides a better condition in terms of low-cycle fatigue than other accordion web with sharp corners.

• Structural Engineering and Mechanics
• /
• 제39권1호
• /
• pp.77-91
• /
• 2011

A simply structural damage detection software is developed to identification damage in beams. According to linear fracture mechanics theory, the localized additional flexibility in damage vicinity can be represented by a lumped parameter element. The damaged beam is modeled by wavelet-based elements to gain the first three frequencies precisely. The first three frequencies influencing functions of damage location and depth are approximated by means of surface-fitting techniques to gain damage detection database of forward problem. Then the first three measured natural frequencies are employed as inputs to solve inverse problem and the intersection of the three frequencies contour lines predict the damage location and depth. The DLL (Dynamic Linkable Library) file of damage detection method is coded by C++ and the corresponding interface of software is coded by virtual instrument software LabVIEW. Finally, the software is tested on beams and shafts in engineering. It is shown that the presented software can be used in actual engineering structures.

• 한국공간구조학회논문집
• /
• 제19권2호
• /
• pp.91-99
• /
• 2019

The push-out tests have been conducted on the specimens which consist of the steel beam with U-shape section and the continuous cap-type shear connector. Existing formulas for the elevation of shear connector capacity were investigated on the basis of test results. The shear capacities of continuous cap-type shear connectors distinctly declined as the diameters of side-hole in the shear connector increased. The rebars through side-hole for the transverse reinforcement improved the shear capacity of continuous cap-type connector by 20 to 30 percent. It was not feasible to obtain the appropriate capacity values of continuous cap-type shear connectors made of thin steel plate like those of in this study, using the existing formulas. The new formula for reflecting the shear strength of penetrative bars was proposed based on the shear equation of Eurocode 4. The slip capacities of continuous cap-type shear connectors were shown to exceed the limit value of 6mm for the sufficiently ductile behavior.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.259-262
• /
• 2002

This paper provides the experimental verification of a non-destructive time domain approach to examine structural damage. Time histories of the vibration response of structure were used to identify the presence of damage. Damage in a structure cause changes in the physical coefficients of mass density, elastic modulus and damping coefficient. This paper examines the use of beam like structures with PVDF sensor and PZT actuator to perform identification of those physical parameters, and hence to detect the damage. Experimental results are presented from tests on cantilevered composite beams damaged at different location and with damage of different dimensions. It is demonstrated that the method can sense the presence of damage, and characterize the damage to a satisfactory precision.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.97.2-97
• /
• 2002

A method for the non-destructive detection of damage using parameterized partial differential equations and Galerkin approximation techniques is presented. This method provides the theoretical and experimental verification of a nondestructive time domain approach to examine structural damage in smart structure. The time histories of the vibration response of structure were used to identify the presence of damage. Damage in a structure causes changes in the physical coefficients of mass density, elastic modulus and damping coefficient. This paper examines the beam-like structures with PVDF sensor and PZT actuator to perform identification of those physical parameters and to detect the...

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.328-333
• /
• 2006

Movable nanometer-scale structures are fabricated by selective etching of single crystalline Au nanoplates. The nanostructures have arbitrary shapes like gear and alphabet 'A' with in-plane size less than 500 m and thickness of $25\sim60nm$. They could be moved successfully on the substrate using a nanornanipulator installed in a focused ion beam system. Our approach is expected to be useful in fabricating various kinds of nanocomponents which can play a role as building blocks for the sophisticated nanodevices or micromachines.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.214-214
• /
• 2013

Ion beam sputtering (IBS) by collision of energetic ions at surfaces is one of the representative methods for physical self-assembly. It is in spotlight as an easy tool to make nano structures in various sizes and shapes by controlling physical variablesWe investigate nano patterning on graphite. We found well-ordered nano ripple patterns after sputtering under the oblique angle and mean wavelengths of these ripples could be controlled as ion fluence increases from sub-10 nm to 80 nm. Each nano ripple is terminated by nano buds, which look like a cotton bud. We also examined the formation of various patterns on graphite by sputtering during swinging the sample at a constant angular velocity that have been never reported.

• Earthquakes and Structures
• /
• 제23권2호
• /
• pp.207-219
• /
• 2022

Seismic response control has always been a grave concern with the damage and collapse of many buildings during the past earthquakes. While there are several existing techniques like base isolation, viscous damper, moment-resisting beam-column connections, tuned mass damper, etc., many of these are succumbing to either of large displacement, near-fault, and long-period earthquakes. Keeping this viewpoint, extensive research on the application of smart materials for seismic response control of buildings was attempted during the last decade. Shape Memory Alloy (SMA) with its unique properties of superelasticity and shape memory effect is one of the smart materials used for seismic control of buildings. In this paper, an exhaustive review has been compiled on the seismic control applications of SMA in buildings. Unique properties of SMA are discussed in detail and different phases of SMA along with crystal characteristics are illustrated. Consequently, various seismic control applications of SMA are discussed in terms of performance and compared with prevalent base isolators, bracings, beam-column connections, and tuned mass damper systems.

• 대한조선학회논문집
• /
• 제29권1호
• /
• pp.135-142
• /
• 1992

선박이나 해양구조물과 같은 접수구조물의 진동해석은 구조계와 유체계를 연성시켜 접수면에서의 적합조건을 만족시키는 해를 구하게 된다. 잘 알려진 바와 같이 이러한 유력탄성해석은 구조계는 유한요소법을, 유체계는 경계요소법을 적용하여 두 계를 연성시켜 효과적으로 풀 수 있는데, 이 방법은 부가수질량 행렬의 모든 자유도가 접수면에 완전연성되어 있기 때문에 실용화하기에는 어려움이 있다. 본 논문에서는 이와같은 단점을 보완하기 위해서 재해석방범에 기초한 유체-구조 연성진동 해석방법을 제시하였다. 이 방법은 전통적으로 보거동 진동해석에 사용해 온 2차원 부가수질량과 3차원 수정계수 J를 이용한 비연성 진동해석 방법과 비교해 볼때, 3차원 수정계수 J의 고려없이 보거동 진동은 물론 고차진동해석에 좋은 해석 결과를 보여 주었다. 이 방법의 타당성과 계산 효율성을 수치예를 통해 입증하였다.