• Advances in nano research
• /
• 제9권1호
• /
• pp.47-58
• /
• 2020

The present paper deals with analyzing nonlinear forced vibrational behaviors of nonlocal multi-phase piezo-magnetic beam rested on elastic substrate and subjected to an excitation of elliptic type. The applied elliptic force may be presented as a Fourier series expansion of Jacobi elliptic functions. The considered multi-phase smart material is based on a composition of piezoelectric and magnetic constituents with desirable percentages. Additionally, the equilibrium equations of nanobeam with piezo-magnetic properties are derived utilizing Hamilton's principle and von-Kármán geometric nonlinearity. Then, an exact solution based on Jacobi elliptic functions has been provided to obtain nonlinear vibrational frequencies. It is found that nonlinear vibrational behaviors of the nanobeam are dependent on the magnitudes of induced electrical voltages, magnetic field intensity, elliptic modulus, force magnitude and elastic substrate parameters.

• 한국광학회지
• /
• 제13권1호
• /
• pp.65-69
• /
• 2002

불소원자(F)와 D$_2$ 기체 발열반응에 의해 레이저 이득매질인 DF 여기분자를 생성시키는 구조의 연속발진형 불화중수소 (DF)화학 레이저를 설계, 제작하고 발진 실험을 수행하였다. 불소원자는 F$_2$ 기체와 H$_2$ 기체를 연소시켜 생성시키고, 불소원자를 초음속 노즐을 통과시킨 직후에 D$_2$ 기체를 분사하여 형성된 DF 여기분자 초음속 흐름을 활성 매질로 사용하여 레이저를 발진시켰다. 본 연구에서 얻은 레이저 발진 출력은 101W이며, 최적의 유량조건에서 얻은 화학 효율은 5.12%, 비출력은 96.5 J/g이다.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1807-1815
• /
• 1992

본 연구에서는 적층 복합재 원통쉘의 동적특성을 검토한다. 복합재료 원통 쉘의 설계에서 주요 관심 대상인 직교이방성 변수가 진동특성과 어떤 관계를 갖는지 알아보기 위하여 직교이방성이론으로 한정시켜 해석하였다. 지배방정식은 면내관성 항을 고려한 Donnell 운동방정식을 사용하며, 진동수방정식은 Rayleigh-Ritz법을 이용 하여 유도하였다. 임의의 경계조건에 적용될 수 있도록 보특성함수를 사용하여 고유 진동수를 간단히 구하였다. 기존의 연구자들이 채용한 복합재료의 물성치들과 복합 재 원통쉘의 고유진동수사이에 어떤관계가 있는지 규명하도록 하였다.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.923-934
• /
• 1987

본 연구에서는 유연한 로봇 조각기를 허브가 있는 첨단질량이 부착된 유연한 외팔보로 모델링하고 Hamilton의 원리에 의하여 유도된 운동방정식을 Galerkin의 모우 드 합 방접을 이용하여 유한차원화하여 상태방정식으로 표시하였다. 계를 제어 모우 드부(controlled mode part)와 잔류 모우드부(residual mode part)로 나누어 제어 모 우드부에 대해 최적제어 이론을 도입하여 귀환계수(feedback ccefficient)를 구하였으 며 측정이 불가능한 상태변수(inaccessible state)를 근사적으로 추정하기 위하여 Lu- enberger 관측기가 사용되었다.2차 성능계수(quadratic performance index)내의 입 력에 대한 가중치의 변화에 따른 제어효과 및 계의 여러 모우드중 중요 모우드만 제어 하는 제어기를 사용함에 따른 Spillover 효과가 계의 제어효과에 미치는 영향을 시뮬 레이션을 통하여 고찰하였으며, 또한 실험을 통하여 이론의 타당성을 검토하였다.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.241-245
• /
• 2015

Energy Distribution Function in pure $CH_4$, $CF_4$ and mixtures of $CF_4$ and Ar, have been analyzed over a range of the reduced electric field strength between 0.1 and 350[Td] by the two-term approximation of the Boltzmann equation (BEq.) method and the Monte Carlo simulation (MCS). The calculations of electron swarm parameters require the knowledge of several collision cross-sections of electron beam. Thus, published momentum transfer, ionization, vibration, attachment, electronic excitation, and dissociation cross-sections of electrons for $CH_4$, $CF_4$ and Ar, were used. The differences of the transport coefficients of electrons in $CH_4$, mixtures of $CH_4$ and Ar, have been explained by the deduced energy distribution functions for electrons and the complete collision cross-sections for electrons. The results of the Boltzmann equation and the Monte Carlo simulation have been compared with the data presented by several workers. The deduced transport coefficients for electrons agree reasonably well with the experimental and simulation data obtained by Nakamura and Hayashi. The energy distribution function of electrons in $CF_4$-Ar mixtures shows the Maxwellian distribution for energy. That is, $f({\varepsilon})$ has the symmetrical shape whose axis of symmetry is a most probably energy.

• 한국항공우주학회지
• /
• 제46권7호
• /
• pp.542-550
• /
• 2018

본 논문에서는 헬리콥터의 전진비행시 발생하는 허브 진동 하중 저감을 위해 설계된 능동 뒷전 플랩이 장착된 SNUF 블레이드의 무베어링 주 로터 적용 설계에 대해 살펴보았다. 이를 위해 EDISON의 박벽 복합재료 회전보 진동해석 프로그램(CORBA77_MEMB)을 이용하여 유연보의 단면 설계가 이루어졌다. 다물체 동역학 해석 프로그램 DYMORE를 이용하여 단면 설계에 따른 블레이드 동특성 및 능동 뒷전 플랩을 이용한 하중 제어의 특성을 예측하였다.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.44-50
• /
• 2010

Structural vibration is a significant problem in many multi-part or multi-component assemblies. In aircraft industry, structures are composed of various fasteners, such as bolts, snap, hinge, weld or other fastener or connector (collectively "fasteners"). Due to these, prediction and design involving dynamic characteristics is quite complicated. However, the current state of the art does not provide an analytical tool to effectively predict structure's dynamic characteristics, because consideration of structural uncertainties (i.e. material properties, geometric tolerance, dimensional tolerance, environment and so on) is difficult and very small fasteners in the structure cause a huge amount of analysis time to predict dynamic characteristics using the FEM (finite element method). In this study, to resolve the current state of the art, a new approach is proposed using the FEM and probabilistic analysis. Firstly, equivalent elements are developed using simple element (e.g. bar, beam, mass) to replace fasteners' finite element model. Developed equivalent elements enable to explain static behavior and dynamic behavior of the structure. Secondly, probabilistic analysis is applied to evaluate the PDF (probability density function) of dynamic characteristics due to tolerance, material properties and so on. MCS (Monte-Carlo simulation) is employed for this. Proposed methodology offers efficiency of dynamic analysis and reality of the field as well. Simple plates joined by fasteners are taken as an example to illustrate the proposed method.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.713-727
• /
• 2018

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

• Smart Structures and Systems
• /
• 제14권3호
• /
• pp.397-418
• /
• 2014

In this paper, a simple two-step method for structural vibration-based health monitoring for beam-like structures have been extended to plate-like structures with though-thickness cracks. Crack locations and severities of plate-like structures are detected using a hybrid approach. The interval wavelet transform is employed to extract crack singularity locations from mode shape and support vector regression (SVR) is applied to predict crack serviettes form crack severity detection database (the relationship of natural frequencies and crack serviettes) using several natural frequencies as inputs. Of particular interest is the natural frequencies estimation for cracked plate-like structures using Rayleigh quotient. Only the natural frequencies and mode shapes of intact structures are needed to calculate the natural frequencies of cracked plate-like structures using a simple formula. The crack severity detection database can be easily obtained with this formula. The hybrid method is investigated using numerical simulation and its validity of the usage of interval wavelet transform and SVR are addressed.

• 전산구조공학
• /
• 제10권3호
• /
• pp.145-155
• /
• 1997

본 연구에서는 ANSYS와 ABAQUS 상용 유한요소 코드를 이용하여 궤도차량의 정적.동적 해석을 충격하중과 주행하중에 대해서 수행하였다. 궤도차량이 충격하중을 받을 때 최대 동적 Von Mises응력은 상판의 빔보강재와 레이스링사이에서 발생하였으며 응력수준은 390-450MPa이다. 정하중에 대한 동하중수 1.6을 고려했을 경우 동적 해석과 동적하중계수가 포함된 정하중 해석은 유사한 결과를 보이고 있다. 과도응력은 주로 레이싱링 주위에서 발생하고 있다. 주행하중의 경우 최대응력은 로드휠 유기압 현가장치 #1번에서 450MPa정도이며, 정적해석과 비선형 해석의 결과가 유사하다.