• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.111-115
• /
• 2001

The die design for hot forging was investigated for manufacturing precisely of scroll rotor made with Al-Si alloy. A scroll rotor is a non-symmetric 3-D shape part, having involute wraps. Disk-shaped billet of Al-Si alloy was extruded to wraps and boss simultaneously. Because the involute wraps is not axi-symmetric, the flow velocity and the stress of die is very much different at each portion. Moreover, the die in wraps portion is a cantilever beam and fractured. In this paper, the analysis of forming and die stress is investigated using the FEM tool, DEFORM-3D. The tensile strength of tool material is $250kg/mm^{2}$. From the analysis results, we can find the maximum principal stress of die is over the fracture strength and redesign the die. The prototype forged part is superior in net shaping and microstructure.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.293-298
• /
• 1998

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal processes. In this paper, to assist the development, a non-contacting optical method is introduced to make in-process measurements of scattering intensities from laser beam during surface grinding processes. This show indications of changes in surface texture of wheel working surfaces. Also, in order to determine the dressing time monitoring method of grinding wheel in surface grinding, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and surface-shaping system between the grinding wheel and the workpiece. The optical dressing time is determined based on the amount of the grain wear and work surface roughness.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.411-414
• /
• 2000

Optical Triangulation Probes (OTPs) are widely used for their simple structure. high resolution, and long operating range. However, errors originating from speckle, inclination of the object, source power fluctuation, ambient light, and noise of the detector limit their usability. In this paper, we propose new design criteria for an error-reduced OTP. The light source module for the system consists of an incoherent light source and a multimode optical fiber for eliminating speckle and shaping a Gaussian beam Intensity profile. A diffuse-reflective white copy paper, which is attached to the object, makes the light intensity distribution on the change-coupled device(CCD). Since the peak positions of the intensity distribution are not related to the various error sources, a sub-pixel resolution signal processing algorithm that can detect the peak position makes it possible to construct an error-reduced OTP system

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.160-165
• /
• 1999

In surface grinding, the conditions of the grinding wheel give a significant effect on the ground workpieces comparing with other metal removal provesses. In this paper, to assist the development, a non-contacting optical method by the laser beam is introduced. The in-process measurement of scattering intensities has been made during surface grinding processes and the surface textures of wheel working surfaces are captured. Also, in order to determine the dressing time monitoring method of a grinding wheel, a three-dimensional computer simulation of the grinding operation has been attempted based on the contact mechanism and the surface-shaping system between the grinding wheel and the workpiece. The optimal dressing time is determined by the amount of the grain wear and work surface roughness.

• 전기의세계
• /
• 제31권5호
• /
• pp.383-390
• /
• 1982

The high power glass laser system was designed and constracted which consisted of a TEM$\_$00/ mode Q-switching oscillator, a pulse shaping, system, two-stage pre-amplifiers, five-stage main amplifiers, a Faraday rotator, and a uni-guide slit. The laser output of 3OGW with the pulsewidth of 2 nsec was obtained by performing the amplifiing experiment in this system. When the laser light with the pulsewidth of 10 nsec was amplified, the large factor of amplification was obtained in the beginning of pulse, but the factor of amplification decreased gradually in the later part of pulse. Therefore, the laser light which has short pulsewidth of-2nsec must be amplified in order to obtain the larger factor of amplification. When the laser beam from the high power glass laser system was irradiated to plasma, the reflected laser light from plasma which occured inevitably could be attenuated to the order of 10$\^$-4/ by using the Faraday rotator and the uni-guide slit.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.139-146
• /
• 2013

This paper proposes a new spatial filtering approach for increasing the depth-of-field (DOF) of imaging systems, which is very useful for obtaining sharp images for a wide range of axial positions of the object. Many different techniques have been reported to increase the depth of field. However the main advantage in our method is its simplicity, since we propose the use of purely absorbing beam-shaping elements, which allows a high focal depth with a minimum modification of the optical architecture. In the filter design, we have used the analogy between the axial behavior of a system with spherical aberration and the transverse impulse response of a 1D defocused system. This allowed us the design of a ring-shaded filter. Finally, experimental verification of the theoretical statements is also provided.

• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.16-29
• /
• 2024

This paper presents a comprehensive review of metasurface technology, focusing on its significant role in extraordinary flat optic functionalities. Traditional optical components, though optimized, are bulky and less congruent with modern integrated electromagnetic and photonic systems. Metasurfaces, recognized as the 2D counterparts of bulk metamaterials, offer solutions with their planar, ultra-thin, and lightweight structures. Their meta-atoms are adept at introducing abrupt shifts in optical properties, paving the way for high-precision light manipulation. By introducing the key design principles of these meta-atoms, such as the magnetic dipole and Pancharatnam-Berry phase, various applications in wavefront shaping and beam forming with simple amplitude/phase manipulation and advanced applications including retroreflectors, Janus metasurfaces, multiplexing of optical wavefronts, data encryption, and metasurfaces for quantum applications are reviewed.

• Journal of Yeungnam Medical Science
• /
• 제8권2호
• /
• pp.114-120
• /
• 1991

영남대학병원 치료방사선과에 설치되어 있는 NELAC-1018의 작은 치료 면적에 대한 전자선출력 특성을 측정하여 다음과 같은 결과를 얻었다. 1. $6{\times}6cm$ applicator에서는 콜리메타가 $6{\times}6cm$일때 0.60에서 콜리메타 완전 열림일때 1.39을 나타내었으며, $20{\times}20cm$ applicator에서는 콜리메타 $20{\times}20cm$ 에서 0.89를, 콜리메타 완전 열림일때는 1.15을 나타내어 작은 면적에서는 콜리메타의 열림 정도에 따른 출력특성이 크게 변하였다. 2. 작은 면적에 대한 출력특성은 6MeV에서 $10{\times}10cm$을 기준으로 하여 $2{\times}3cm$ 일때 0.618, $6{\times}6cm$일때 0.826을 나타내었으며, 15MeV에서 $2{\times}3cm$일때 0.887, $6{\times}6cm$ 0.982을 나타내어 에너지가 클수록 치료 면적의 크기에 따른 출력변화가 적음을 나타내었다. 위와 같은 측정결과는 작은 치료면적을 갖는 전자선 치료의 임상적이용에 있어서 콜리메타의 열림 정도의 결정과 에너지 선택이 매우 중요함을 시사하고 있다.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1381-1388
• /
• 1993

본 연구에서는 구조계와 제어계가 결합된계에 대하여, 성능 평가함수의 구조 설계변수에 대한 감도를 Riccati방정식으로부터 직접 해석할 수 있는 효율적인 방안을 제시하여 동시최적설계가 가능토록한다. 그리고 유색잡음의 불규칙 노면입력을 받는 차체탄성을 고려한 Hac의 2륜 차량의 모델에 LQG제어를 행한 경우에 대하여, 본 연구 방법을 적용시켜 동시 최적화를 수행한 제어성능 특성을 종래의 최적제어만에 의한 제어성능과 비교, 검토 한다. 구조설계변수로는 현가장치의 강성특성, 감쇠특성 및 현가장치 지지점의 위치로 선정한다.

• 한국의학물리학회지:의학물리
• /
• 제13권2호
• /
• pp.62-68
• /
• 2002

최근 설치된 선형가속기는 다엽 콜리메이터를 장착하고 있다. 기본적으로 다엽 콜리메이트의 사용은 기존의 차폐블럭을 대체하는 역할을 한다. 그러나 다엽 콜리메이터는 폭 1 cm의 콜리메이터가 각각 움직여서 방사선 조사 범위를 만들어 정교한 조사범위를 만들기 어려운 경우가 있을 수 있다. 따라서 조사야를 보다 정밀하게 만들기 위해 다엽 콜리메이터 아래 추가 차폐물을 사용하게 된다. 다엽 콜리메이터 아래 추가 차폐물을 사용할 경우 차폐물과 환자의 피부표면과의 거리가 짧아져 피부표면 선량이 증가하게 되며 최대 선량점(D$_{max}$)이 변할 수 있다. 이와 같은 변화는 조사야의 크기와 방사선의 에너지에 따라 영향을 받을 수 있다. 따라서 본 연구는 다엽 콜리메이터 아래 추가 차폐물을 사용할 때 조사야와 방사선에너지에 따라 표면선량과 최대 선량점의 변화를 측정하여 이들 값이 증가함을 확인하였고 다엽 콜리메이터 아래 추가 차폐물을 사용함으로써 증가한 표면선량은 전자 흡수판으로 2-3 mm 두께의 납판을 사용하여 효과적으로 감소시킬 수 있음을 확인하였다.