• Journal of Environmental Health Sciences
• /
• v.17 no.1
• /
• pp.95-103
• /
• 1991

For the purpose of estimating the working environment and the relationship between the airborne lead concentration and the ZPP level in the whole blood of the workers, the airborne lead concentrations and the ZPP level were measured at the 26 plants which deal with lead, from October 5 to November 5 in 1988. Analysis of the airborne lead concentration was performed by NIOSH Method 7082, and the ZPP level was measured by a hematofluorometer. The following results are concluded. 1. The average airborne lead concentration of the lead battery manufactures is 0.025mg/m$^{3}$ and that of the secondary lead smelters is 0.023mg/m$^{3}$. There were no significant differences between industry (p>0.1) 2. At the lead battery manufacture, the process of lead powder production showed the highest concentration of 0.034mg/m$^{3}$ but there were no significant differences among the processes (p>0.1). At the secondary lead smelter, the process of dismantling waste batteries showed the highest concentration 0.141mg/m$^{3}$, and there were very significant differences among the processes (p<0.005). 3. The ZPP level in the whole blood showed significant differences between industry (p<0.10). The average ZPP level of the lead battery manufactures is 133.0 + 106.3 $\mu$g/100ml and that of the secondary lead smelters is 149.6 + 110.9 $\mu$g/100ml. 4. The correlation coefficients between the airborne lead concantration and ZPP level were 0. 426 (p<0.001) for the lead battery manufactures and 0.484 (p<0.001) for the secondary lead smelters. The correlation coefficients between the work duration (in months) and the ZPP level were 0.238 (p<0.001) for the lead battery mannfactures and 0.075 (p>0.10) for the secondary lead smelters. 5. The linear regression equation, with the airborne lead concentration as an independent variable and the ZPP level as a dependent variable, is Y=96.84+1300.34X (r=0.448, p<0.001) for the 26 plants which deal with lead. The linear regression equation, with the work duration(in months) as an independent variable and the ZPP level as a dependent variable, is Y=127.28 +0.49X (r=0.162, p<0.05). 6. The correlation coefficients between the amount of inhaled lead and ZPP level were 0.349 (p < 0.001) for the lead battery manufactures and 0.318(p<0.001) for the secondary lead smeltes. The linear regression equation for the 26 plants surveyed, with the amount of inhaled lead as an independent variable and ZPP level as a dependent variable, is Y=123.63+18.82X (r=0. 335, p<0.001).

• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.4
• /
• pp.51-65
• /
• 2012

Battery switching EVs are considered to be a promising alternative to overcome long charging time problems in the EV adoption. The purpose of this research is to develop integrated model for battery inventory and battery switching waiting times. Due to complexity of exact analysis, a practical approximation method is developed, which provides close results to exact values. Numerical experiments show that there exist trade-offs between the battery inventory level and the number of switching stations. The proposed model can be applied to evaluate and select the minimum cost alternative in implementing the battery switching stations.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.74-83
• /
• 2014

This paper proposes a study on the configuration of balancing of plant(BOP) and implementation of battery management system(BMS) functions for vanadium redox flow battery(VRFB) and propose a method consists of sensor and required design specifications BOP system configuration. And it proposes an method of the functions implementation and control algorithm of the BMS for flow battery. Functions of BMS include temperature control, the charge and discharge control, flow control, level control, state of charge(SOC) estimation and a battery protection through the sensor signal of BOP. Functions of BMS is implemented by the sensor signal, so it is recognized as a very important factor measurement accuracy of the data. Therefore, measuring a mechanical signal(flow rate, temperature, level) through the BOP test model, and the measuring an electrical signal(cell voltage, stack voltage and stack current) through the VRFB charge-discharge system and analyzes the precision of data in this paper. Also it shows a good charge-discharge test results by the SOC estimation algorithm of VRFB. Proposed BOP configuration and BMS functions implementation can be used as a reference indicator for VRFB system design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.8
• /
• pp.1033-1038
• /
• 2014

Electric vehicles should be connected to power system for charge and discharge of battery. Besides vehicle's battery is charged for a power source, it is also reversibly possible to provide power source from battery to power system. Researches on battery usage for regulation resources have been progressed and could cause cost increase excessively because they distribute regulation capacity equally without considering the battery wear cost of SOC, temperature, voltage and so on. This causes increase of grid maintenance cost and aggravate economical efficiency. In this paper it is studied that the cost could be minimized according to the battery condition and characteristic. The equation is developed in this paper to calculate the possible number of charge and discharge cycle, according to SOC level and weighting factors representing the relation between battery life and temperature as well as voltage. Thereafter, the correlation is inferred between the battery condition and wear cost reflecting the battery price, and the expense of compensation is decided according to the condition on battery wear-out of vehicle. In addition, using realtime error between load and load expectation, it is calculated how much regulation capacity should be provided.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.193-199
• /
• 2011

In this paper, we proposed battery driven low power algorithm in mobile device. Algorithm the mobile devices in power of the battery for the task to perform power consumption to reduce the frequency alters. Power of the battery perform to a task power consumption of is less than the task perform to frequency the lower. Frequency control the task, depending on in the entire system devices used among the highest frequency with devices first target perform to. Frequency in the decrease the second largest frequency with of the device the frequency in changes the power consumption to calculate. The calculated consumption power the battery of level is greater than level the frequency by adjusting power consumption, lower power of the battery the task perform when you can to the frequency to adjust. Experiment the frequency by adjusting power consumption a method to reduce using [6] and in the same environment power of the battery consider the task to perform frequency were controlled. The results in [6] perform does not battery power on task operates that the result was.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.486-493
• /
• 2015

In this paper, a battery model for electric vehicle virtual platform was developed. A battery model consisted of a battery cell model and battery thermal management system. A battery cell model was developed based on Randles equivalent circuit model. Circuit parameters in the form of 3D map data was obtained by charge-discharge experiment of Li-Polymer battery in various temperature condition. The developed battery cell model was experimentally verified by comparing voltages. Thermal management system model was also developed using heat generator, heat transfer and convection model, and cooling fan. For verification of the developed battery model in vehicle level, the integrated battery model was applied in to EV(electric vehicle) virtual platform, and virtual driving simulation using UDDS velocity profile was conducted. The accuracy of the developed battery model has been verified by comparing the simulation results from EV platform with the experimental data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2022

Collision analysis involving a vehicle frame that includes a battery and a battery case was performed using a carbon fiber composite material (CFRP) and a glass fiber-reinforced plastic (GFRP), which are lightweight materials. Three types of collisions were analyzed: frontal collisions, partial frontal collisions, and side collisions. The maximum stress and deformation levels were measured for each case. To evaluate the stability of ignition and explosion potential of the battery, the maximum stress of the frame was measured before measuring the direct stress to confirm whether the collision energy was sufficiently absorbed. The deformation level of the battery case was measured to confirm whether the battery case affects the battery directly.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.228-235
• /
• 2024

Battery use is increasing worldwide to achieve carbon neutrality and improve energy efficiency, but batteries are a finite resource and their application is determined by capacity and specifications. Battery performance deteriorates as the number of uses increases. A certain level of battery performance degradation has become an issue in the field of reuse and recycling, and various studies are being conducted on reuse to solve power shortages. Waste batteries from electric vehicles are suitable for building ESS based on reusable batteries, and for stable use, technical skills are needed to accurately predict battery life and determine status information. Predicting battery life and determining status information are difficult due to non-linearity due to internal structure or chemical changes. In this paper, we manufactured a modular internal resistance measuring device and compared the measured values with Hioki equipment to minimize the error rate through a correction method. As a result of testing Hioki equipment and modular measuring instruments to ensure efficiency and safety based on reusable batteries, an accuracy of over 95% was confirmed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.350-351
• /
• 2005

The electrochemical behavior of Si-C material synthesized by heating the mixture of silicon and polyvinylidene fluoride (PVDF). Coin cells of the type 2025 were made using the synthesized material and the electrochemical studies were performed. Si-C/Li cells were made by using the developed Si-C material. Charge/discharge test was performed at 0.1C hour rate. Initial charge and discharge capacities at Si-C material derived from 20 wt.% of PVDF was found to be 1,830 and 526 mAh/g respectively. Initial charge/discharge characteristics of the electrode were analyzed. The level of reversible specific capacity was about 216 mAh/g at Si-C material derived from 20 wt.% of PVDF, IIE, intercalation efficiency at initial charge/discharge, was 68 %. Surface irreversible specific capacity was 31 mAh/g, and average specific resistance was 2.6 ohm*g.

• Journal of Information Technology Applications and Management
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2023

Interest in the future of the battery market is growing as Tesla announces plans to increase production of electric vehicles and to produce batteries. Tesla announced an action plan to reduce battery prices by 56% through 'Battery Day', which included expansion of factories to internalize batteries and improvement of materials and production technology. In the trend of automobile electrification, the expansion of the battery market, which accounts for 40% of the cost of electric vehicles, is inevitable, and the size of the electric vehicle battery market in 2026 is expected to increase more than five times compared to 2016. With the development of materials and process technology, the energy density of electric vehicle batteries is increasing while the price is decreasing. Soon, electric vehicles and internal combustion locomotives are expected to compete on the same line. Recently, the mileage of electric vehicles is approaching that of an internal combustion locomotive due to the installation of high-capacity batteries. In the EV battery market, Korean, Chinese and Japanese companies are fiercely competing. Based on market share in the first half of 2020, LG Chem, CATL, and Panasonic are leading the EV battery supply, and the top 10 companies included 3 Korean companies, 5 Chinese companies, and 2 Japanese companies. All-solid, lithium-sulfur, sodium-ion, and lithium air batteries are being discussed as the next-generation batteries after lithium-ion, among which all-solid-state batteries are the most active. All-solid-state batteries can dramatically improve stability and charging speed by using a solid electrolyte, and are excellent in terms of technology readiness level (TRL) among various technology alternatives. In order to increase the competitiveness of the battery industry in the future, efforts to increase the productivity and economy of electric vehicle batteries are also required along with the development of next-generation battery technology.