• Economic and Environmental Geology
• /
• v.34 no.5
• /
• pp.461-470
• /
• 2001

The Shihung mine was restored in the early 90's after abandonment for 20 yews since 1973. Although disposed mine tailings were removed and the site was replaced by an incineration plant, still some residual mine tailings remain in the places including the old mine tailing ditposal area and the adjacent agricultural area. These residual mine tailings are prone to impose an adverse impact on the soil and groundwater and needs investigation for the potential contamination. Mine tailing samples were collected from the old tailing disposal area and the iii paddy. The porewater from the mine tailing were extracted and analysed to investigate chemical changes along the reaction path. Batch leaching tests were also carried out in the laboratory to find any supporting evidence found in the field analysis. Evidence of elemental leaching was confirmed both by the mine tailing and the porewater chemistry in them. The element concentrations of Cu, Cd, Pb, Zn in the porewater exceed the standard for drinking water of Korean government and US EPA. Leaching of heavy metals from the mine tailing seem to be responsible for the contamination. In batch leaching test. heavy metals were either continuous1y released or declined rapidly. Combining the information with porewater variation with depths and the geochemical meodeling results, most of elements are controlled by dissolution and/or precipitation processes, with some solubility controlling solid phases (Cu, Pb, Fe and Zn). Batch leaching test conducted at fixed pH 4 showed much higher releases for the heavy metals up to 400 times (Zn) and this area is becoming more vulnerable to soil and groundwater pollution as precipitation pH shifts to acidic condition.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.2
• /
• pp.95-100
• /
• 1999

Hydrocarbon compounds in vadose zone soils caused by adsorption onto the surfaces of solid particles are generally considered to show retardation effect. In this study, we investigated the retardation effect on the transport of Benzene in a sandy soil by conducting batch and column tests. The batch test was conducted by equilibrating dry soil mass with Benzene solutions of various initial concentrations. and by analyzing the concentrations of Benzene in initial and equilibrated solutions using HPLC. The column test consisted of monitoring the concentrations of effluent versus time known as a breakthrough curve (BTC). We used KCl and Benzene solutions with the concentration of 10 g/L and 0.88 g/L as a tracer, and injected them into the inlet boundary of the soil sample as a square pulse type respectively, and monitored the effluent concentrations at the exit boundary under a steady state condition using an EC-meter and HPLC. From the batch test, we obtained a distribution coefficient assuming that a linear adsorption isotherm exists and calculated the retardation factor based on the bulk density and porosity of the column sample. We also predicted the column BTC curve using the retardation factor obtained from the distribution coefficient and compared with the measured BTC of Benzene. The results of the column test showed that i) the peak concentration of Benzene was much smaller than that of KCl and ⅱ) the travel times of peak concentrations for the two tracers were more or less identical. These results indicate that adsorption of Benzene onto the sand panicles occurred during the pulse propagation but the retardation of Benzene caused by adsorption was not present in the studied soil. Comparison of the predicted with the measured BTC of Benzene resulted in a poor agreement due to the absence of the retardation phenomenon. The only way to describe the absolute decrease of Benzene concentration in the column leaching experiment was to introduce a decay or sink coefficient in the convection-dispersion equation (CDE) model to account for an irreversible sorption of Benzene in the aqueous phase.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.93-99
• /
• 1993

This study was conducted to investigate the cause of a new duck disease occured in southern part of Korea. A meat type duck farm located in Kangjin, Chonnam Province had experienced outbreaks of septicemic disease at around 20 days of age in nearly every batch of ducklings from early spring to early summer in 1989. Main symptoms of the birds were eye and nasal discharge, depression, inappetence, diarrhea and nervous signs such as tremor and ataxia. Some birds died suddenly without any signs. Mortality reached from 20% to 80% in severe cases. The autopsy findings of the affected ducklings revealed consistantly severe airsacculitis, fibropericarditis, perihepatitis and occasionaly enteritis and distended ureter with urate deposit. A rod shaped gram-negative bacterium was isolated purely from brain and liver of the diseased ducks by culturing the specimens on blood agar for 48 hours in candle jar. The isolate neither produced hemolysis nor grew on MacConKey Agar. It formed colony relatively slowly being recognizable at least 36 hours after culturing, reaching colony size of about 1mm in diameter at 48 hours culture. The colony looked iridescent under oblique light and had muddy odor. The isolate did not ferment carbohydrates tested but produced gelatinase, hippuricase and oxidase which were considered as characteristics of P anatipestifer. The isolate induced similar signs and lesions when infected experimentally into ducks of 3 to 38 days age via intraperitoneum or intratrachea. However it did not produce any clinical signs wen inoculated via intranasal route. It produced only mild signs in chicken just injected with a very large dose. The bacteria did not produce any signas or lesions in mice. It was concluded through biochemical and physiological tests and animal inoculation tests that the new disease was caused by P anatipestifer.

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.411-416
• /
• 2009

This study was initiated to improve the cooling water quality by chemical coagulation and sedimentation in steel mills. Due to the inefficient flocculation in the settling tanks of blast furnace cooling water systems, the solid particles in the cooling water overflow accumulate and clog the cooling system. To protect the cooling water system from such fouling, proper flocculants must be continuously used. Laboratory tests were performed for the indirect cooling water system of a plate mill. The batch test in the gas scrubbing cooling water system of a blast furnace showed that the proposed coagulant was more effective for the improvement of coagulation and sedimentation than the existing one. During the tests, cationic flocculants were more effective than use of only an anionic flocculant. The suggested combination of anionic and cationic flocculants can probably improve the turbidity removal efficiency of the cooling water. Proper control of the overflow rate by the designed residence time would help turbidity removal efficiency in the settling tank. In addition, the settling can be enhanced by adopting rapid and slow mixing alternatively. Scale problems in blast furnace cooling water system were reduced to some extent by efficient settling.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.407-413
• /
• 2006

Artificial aggregates made by coal fly ash that is classified as an industrial by-product was tested to oxidize hydrogen sulfide under various testing conditions. For the determination of optimum condition for converting coal fly ash to aggregates, specimens were prepared by varying ratio of fly ash, cement, water content, and foaming agent. These specimens were tested to determine specific gravity, water absorption, and compressive strength. Specimens, which were used for the removal of hydrogen sulfide, were selected based on the measured specific gravity, water absorption, and compressive strength. Tests for hydrogen sulfide removal were performed via batch and column tests. Under the testing conditions used in this study, removal rates of hydrogen sulfide were linearly proportional to amounts of coal fly ash, and further increased when water was added.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.110-118
• /
• 2018

Purpose: In this study, the potential for biogas production, degradation rates, and lag-phase of diauxic growth of carbohydrate-based material, which is one of the proximate compositions, were investigated. Methods: This study was conducted using starch as a carbohydrate-based material. In experimental condition 1, the biogas potential of carbohydrate-based material was measured. In experimental condition 2, the effect of feed to microorganism ratio (F/M ratio) on lag-phase of diauxic growth from carbohydrate-based material was tested. Biochemical methane potential tests were performed at five different feed to microorganism ratios (0.2, 0.4, 0.6, 0.8, and 1.0) under mesophilic conditions. The biogas production patterns, lag-phase, total volatile fatty acids to total alkalinity ratio (TVFA/TA ratio), and time required for 90 percent biogas production were used to evaluate biogas production based on the biochemical methane potential tests. Results: In experimental condition 1, unlike previous studies, biogas was produced in the TVFA/TA ratio ranging from 1.131 to 2.029 (approximately 13-19 days). The methane content in the biogas produced from the digesters was 7% on day 9 and increased rapidly until approximately day 27 (approximately 72%). In experimental condition 2, biogas yield was improved when the feed to microorganism ratio exceeded 0.6, with an initial lag-phase. Conclusions: Even if the TVFA/TA ratio was greater than 1.0, the biogas production was processed continuously, and the $CO_2$ content of the biogas production was as high as 60%. The biogas yield was improved when the F/M ratio was increased more than 0.6, but the lag-phase of carbohydrate-based material digestion became longer starting with high organic loading rate. To clarify the problem of the initial lag-phase, our future study will examine the microbial mechanisms during anaerobic digestion.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.914-919
• /
• 2008

This present was carried out to evaluate the adaptability of stabilization method which was used industrial byproducts as the stabilization agency in the abandoned mine site. In order to investigate stabilization effect on As-contaminated soils treated by industrial by-products, batch tests and column tests were carried out with As-contaminated soils collected from farmland around the abandoned mine site. ZVI(zero valent iron) and SRS(steel refining slag) was shown a good treatment effect. After the column test, sequential extraction test and simple bioavailability extraction test(SBET) were carried out to analysis of the soil, and scanning electron micrograph(SEM) analysis was carried out to compare the morphology and structure of ZVI and SRS before and after reacting with arsenic in the soil. As a result, ZVI and SRS were shown 93%, 62% reduction of As concentration respectively by comparison with untreated soils. Therefore, if ZVI and SRS are used as treatment materials in As-contaminated soils, it is expected that the As leaching from soils is reduced effectively.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.387-393
• /
• 2017

A chemical batch tests were conducted to evaluate if microwave heating enhances phosphorous release from waste activated sludge (WAS) at pH 2.5, 5, 7, 9 and 11. Polyphosphate-accumulating organisms have a unique physiological feature, which releases intracellular polyphosphate granules when they are exposed under high temperature environments. Microwave irradiation was found to encourage large amount of phosphorus release from WAS, depending on pH and temperature conditions. Most of phosphorus was released below $59^{\circ}C$ within 30 min. A marked increase in phosphorus release was observed under alkaline or acidic conditions. However, based on control tests for phosphorus release under different pH conditions without microwave heating, the largest amount of phosphorus released by microwave irradiation was found at pH 7, followed by 5, 9, 11. On the other hand, crystallization was conducted to obtain magnesium ammonium phosphate (MAP) from phosphate released by microwave heating at pH 7. X-ray diffraction analysis confirmed that the recovered crystalline materials were MAP. MAP is an environmentally friendly fertilizer, which slowly releases ammonia and phosphorus in response to the demand of plant root. Thus, the recovered MAP as a phosphate fertilizer is fully expected to play a important role in the reduction of agricultural non-point pollution.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1415-1426
• /
• 2008

Stone columns, locally called "GCP (granular compaction pile)" can be used to improve strength and resistance against lateral movement of a foundation soil like rigid piles and piers. Also installation of such a discrete column facilitates drainage, and densifies and reinforces the soil in the sense of ground improvement. The integrity of the GCP has been indirectly controlled with the records of each batch including depth and the quantity of stone filled. An integrity testing was attempted using crosshole S-wave logging. The method is conceptionally same as the crosshole sonic logging (CSL) for drilled piers. The only and critical difference is that S-wave should be used in the logging, because P-wave velocity of the stone column is less than that of ground water. The crosshole sonic logger does not have the capability to measure S-wave propagating through the skeleton of crushed stone. An electro-mechanical source, which can generate either P- or SH-waves, and a 1-D geophone were used to measure SH-waves. Two 76mm diameter cased boreholes were installed 1 meter apart across the nominal 700mm diameter stone column. At every 10cm of depth, shear wave was measured across the stone column. One more borehole was also installed 1 meter outward from the one of the above boreholes to measure the shear wave profile of the surrounding soil. The diametric variation of the stone column with respect to depth was evaluated from the shear wave arrival times across the stone column, and shear wave velocities of crushed stone and surrounding soil. The volume calculated with these variational diameters is very close to the actual quantity of the stone filled.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.73-78
• /
• 2018

The main objective of this study was to evaluate the effects of acetate on the cultivation of anabena under mixotrophic condition. Four different types of acetates were used for the anebena cultivation. Among them, ethyl acetate was found to be the most effective and the growth rates linearly increased as the amount of ethyl acetate increased. When 40 mM of ethyl acetate was used, the highest values of specific growth rate of $0.979day^{-1}$ and maximum biomass productivity of $0.293g\;L^{-1}\;d^{-1}$ were obtained. On the contrary, input of acetic acid and butyl acetate inhibited the growth of anabena. For aeration tests, 0.54 vvm was optimum for anabena cultivation. For a semi-continuous cultivation test, ethyl acetate was used after 0.54 vvm test was finished. Then, test continued under 0.54 vvm and 40 mM of ethyl acetate. Lower specific growth rate and maximum biomass productivity were obtained compared to those from batch cultivation tests. However, the greatest maximum concentration of 5.91 g/L was obtained during the semi-continuous cultivation test.