• Environmental Engineering Research
• /
• 제19권1호
• /
• pp.91-99
• /
• 2014

Ordinary heterotrophic organism (OHO) active biomass plays key roles in biological wastewater treatment processes. However, due to the lack of measurement techniques, the OHO active biomass exists hypothetically within the design and simulation of biological wastewater treatment processes. This research was purposed to develop a quick and easy quantifying technique for the OHO active biomass applying a modified batch aerobic growth test. Two nitrification-denitrification activated sludge systems, with 10- and 20-day sludge ages, were operated to provide well-cultured mixed liquor to the batch tests. A steady state design model was firstly applied to quantify the "theoretical" OHO active biomass concentration of the two parent systems. The mixed liquor from the parent systems was then inoculated to a batch growth test and a batch digestion test to estimate the "measured" OHO active biomass concentration in the mixed liquor. The measured OHO active biomass concentrations with the batch growth test and the batch digestion test were compared to the theoretical concentrations of the parent system. The measured concentrations with the batch growth test were generally smaller than the theoretical concentrations. However, the measured concentrations with the batch aerobic digestion tests showed a good correlation to the theoretical concentrations. Thus, a different microbial growth condition (i.e., a higher food/biomass ratio) in the batch growth test, compared to the parent system or the batch digestion test, was found to cause underestimation of the OHO active biomass concentrations.

• 상하수도학회지
• /
• 제18권2호
• /
• pp.113-120
• /
• 2004

The biodegradability of organics has become essential for the design and modeling of a biological nutrient removal process. Respirometry for the batch test just with wastewater has been conducted to estimate active biomass and readily biodegradable organics in municipal wastewater simultaneously. Municipal wastewater contains significant active biomass, which is estimated about 17% of COD. Compared to the batch test seeded with sludge, the batch test just with wastewater represents a little higher readily biodegradable organics. This might be due to the different environment of the logarithmic growth of active biomass. The nitrate uptake rate test has been also performed for the estimation of the readily biodegradable organics. The nitrate uptake rate test results in a little higher readily biodegradable organics compared to the batch test seeded with sludge and similar organics compared to the batch test just with wastewater. This might be caused by the different sludge of a sequencing batch reactor process. Taking the result of the previous research into account, the readily biodegradable, slowly biodegradable, active biomass, soluble inert, and particulate inert organics are estimated about 11%, 49%, 17%, 11%, and 12% of COD, respectively.

• 항공우주기술
• /
• 제2권2호
• /
• pp.45-49
• /
• 2003

한국항공우주연구원 위성시험동에 설치된 Bake-Out 챔버를 통하여 과학위성 1호 비행모델(STSAT-1FM)에 대한 Bake-Out 시험이 수행되었다. 본 시험은 시험 후에 장착될 FIMS라는 광학장비에 영향을 미칠 Outgassing Rate의 측정 및 고온에서의 Bake-Out을 통한 오염물질 제거에 목적을 둔 시험으로 총 10일여 동안 시험이 수행되었다. Honeycomb Panel 및 Harness에 대한 시험(Batch 1), 조립된 비행모델에 대한 Bake-Out(batch 2), 그리고 part별로 펼쳐진 상태로의 Bake-Out 시험(Batch 3), 총 세 번의 시험으로 이루어졌다. 각각의 시험에 대하여 TQCM(Thermoelectric Quartz Crystal Microbalance) 및 RGA(Residual Gas Analyzer)를 통하여 Outgassing 물질에 대한 정량적, 정성적 측정 및 분석이 이루어졌다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.358-362
• /
• 2003

산화물 형태의 사용후핵연료를 용융염에서 금속 형태로 전환하여, 발열량, 부피 및 방사능을 1/4로 감소시킬 수 있는 전기화학적 금속전환 공정을 개발하고, 5kg $U_3O_8$/Batch 규모의 mock-up 실험을 수행하였다. 본 연구에서는 전해 셀의 운전변수를 해석하였으며, 아울러 hot test를 위한 장치개발 연구도 병행하였다. 전기화학적 금속전환 공정을 이용하여 $U_3O_8$ 형태의 천연우라늄 분말을 99% 이상 금속전환할 수 있었으며, 또한 20kg $U_3O_8$/batch 규모 장치의 설계자료를 산출할 수 있었다.

• 방사성폐기물학회지
• /
• 제1권1호
• /
• pp.47-53
• /
• 2003

한국원자력연구소에서는 산화물 형태의 사용후핵연료를 용융염 매질에서 금속으로 전환함으로써 사용후핵연료의 발열량, 부피 및 방사능을 1/4로 감소시킬 수 있는 전기화학적 금속전환공정을 개발하고 g 규모(3-40g $U_{3}O_{8}$ batch)로 기초실험을 수행하고 있다. 본 연구에서는 전기화학적 금속전환 장치를 5kg $U_{3}O_{8}$ batch 규모로 설계 제작하고, 목표로 하고 있는 20kg $U_{3}O_{8}$ batch 규모 핫셀 실증을 위한 장치설계자료를 산출하기 위해 mock-up test를 수행하였다. 운전변수에 따른 $U_{3}O_{8}$의 전기화학적 환원거동을 규명하였으며, $U_{3}O_{8}$ 분말을 99% 이상 금속전환하여 전기화학적 금속전환공정의 타당성을 kg 규모로 검증할 수 있었다.

• 한국건축시공학회지
• /
• 제13권4호
• /
• pp.360-371
• /
• 2013

Fast delivery of construction projects provides more value to project owners. Batch production, which is production not in single pieces, but in batches, is a common approach in repetitive construction projects such as multi-unit residential building construction projects. In batch production, the use of a small batch size allows the early start of subsequent activities, and thus can lead to early completion of projects. In addition to batch size, balance between productivities in construction activities can affect project duration. However, the impact of the balance between productivities with regard to their order on project duration has not been studied. The main goal of this study is to test a hypothesis, which is that the order of construction activities' unbalanced productivities affects the amount of time reduction that can be achieved by using a small batch size. A computer-based simulation model was developed, and five different cases were simulated to test the hypothesis. The conclusion of the simulation result is that the order of productivities does not affect the time reduction achieved by using a small batch size. It is expected that the findings of this study can help general contractors make decisions in terms of batch size.

• 한국정보처리학회논문지
• /
• 제4권7호
• /
• pp.1900-1906
• /
• 1997

본 논문에서는 FPGA에 회로를 설계할 때, 일괄검사가 가능한 BIST의 효율적인 BILBO(이하 EBILBO)를 설계한다. 제안된 일괄검사 알고리즘은 회로의 복잡도와 규모가 큰 회로에서 하나의 핀(pin)으로 정상속도에서 회로검사가 가능하다. BIST 설계에서, 필요한 검사패턴은 의사 랜덤패턴으로 생성하고, 출력은 다중 입력 쉬프트 레지스터에 의한 병렬 신호분석으로 검사하였다. 제안된 알고리즘은 VHDL로 동작적 기술하므로 검사패턴 생성과 응답분석 및 압축에 대한 모델을 용이하게 변경할 수 있다. FPGA상에 설계된 회로에서, 구현된 BIST의 EBILBO의 면적과 성능은 ISCAS89 벤치마크 회로를 통하여 평가하였다. 600 셀(cell) 이상의 회로에서 EBILBO 면적은 30% 이하로 감소하고, 검사패턴은 500K 정도로 신축성 있게 생성되고, 고장검출률의 범위는 88.3%에서 100%임을 확인하였다. 일괄검사의 BIST를 위한 EBILBO 동작은 정상모드와 병행하여 실시간으로 검사모드를 $s+n+(2^s/2^p-1)$시간 내에 동시에 수행할 수 있다.(CUT의 PI 수;n, 레지스터 수;s, p는 다항식의 차수). 제안된 알고리즘은 VHDL 코딩으로 설계와 검사가 병행될 수 있는 라이브러리로 구축되어 DFT에 광범위하게 응용되어질 수 있다.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.159-167
• /
• 2002

아연의 주물사에 대한 분배계수는 주물사에 포함된 TOC, 점토 함량, 총 철 함량 등에 따라 변하고 특히 용액 PH에 큰 영향을 받는 것을 관찰하였다. Batch 실험으로부터 얻어진 경험식으로부터분배계수와 제거상수를 예측할 수 있었다. Batch kinetic 실험과 batch sorption 실험으로부터 얻어진 분배계수는 용액 pH가 같을 시 거의 같은 값을 보이고 있다.

• 전자공학회논문지C
• /
• 제34C권9호
• /
• pp.53-60
• /
• 1997

In this paper, an efficient BILBO(named EBILBO) is proposed for batch testing application when a BIST (built-in self test) circuit is implemented on ASIC. In a large and complex circuit, the proposed algorithm of batch testing has one pin-count that can easily control 4 test modes in the normal speed of circuit operation. For the implementation of the BIST cifcuit, the test patern needed is generated by PRTPG(pseudo-random test pattern generator) and the ouput is observed by proposed algorithm is easily modified, such as the modelling of test pattern genration, signature EBILBO area and performance of the implemented BIST are evaluated using ISCAS89 benchmark circuits. As a resutl, in a circuit above 600 gates, it is confirmed that test patterns are genrated flexibly about 500K as EBILBO area is 59%, and the range of fault coverage is from 88.3% to 100%. And the optimized operation frequency of EBILBO designed and the area are 50MHz and 150K respectively. On the BIST circit of the proposed batch testing, the test mode of EBILBO is able to execute as realtime that has te number of s$\^$+/n$\^$+/(2s/2p-1) clocks simultaneously with the normal mode of circuit operation. Also the proposed algorithm is made of the library with VHDL coding thus, it will be widely applied to DFT (design for testability) that satisfies the design and test field.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.34.2-34.2
• /
• 2008

The batch least square filter is widely used for ground estimations. However, in orbit determination (OD) under inaccurate initial conditions and few measurement data the performance by the batch least square filter can lead an unstable results. To complement weak part of the batch filter, the batch unscented transformation without any linearization process is developed by ACL (Astrodynamics and Control Laboratory) in YONSEI University. In this paper, the batch unscented transformation is introduced and applied to satellite orbit determination using Satellite Laser Ranging (SLR) data. Only range of the satellite measured from ground tracking stations is used for measurement data. The results of simulation test are compared with those of the weighted batch least square filter for various initial states errors (position and velocity). Simulation results show that the batch unscented transformation is comparable or slightly superior to batch least square filter in the orbit determination.