• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.51-56
• /
• 1998

The bast fiber of paper bush misumada have been cultivated in south coast bay of the Korean peninsula were not used to handmade painting paper. Therefore, in using the bast fiber of paper bush misumada manufactured handmade painting paper, tested absorption speed, blot characteristics and organic functions. The results are summarized as follows; The handmade painting paper manufacured only the bast fiber of paper bush misumada proper to the absorption speed of China ink, didn't have difference of the length and width for blot. And it was most fitted to east writing-and-painting using. Also the flexibility excell, and light and shade in overpainting directly appeared, and fitted to black-and-white drawing. And the using increase plan of the paper bush misumada demanded.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.51-61
• /
• 2012

The new alkali pulping process combined with electron beam treatment was applied to utilize hemp bast tissues as a new valuable fibrous resource. Hemp bast tissues have some chemical properties with high lignin contents and holocellulose not to be defiberized by alkali pulping only, compared with the bast tissue of paper mulberry. To make up for the weakness of traditional alkali pulping process, electron beams were directly irradiated into the swelled bast tissue of hemp in NaOH solution and distilled water, and then facilitated the defiberization of hemp bast tissues. The papermaking from hemp bast fibers manufactured by the combination pulping process showed good apparent density, formation structure and air permeability, and had some mechanical properties with lower tensile, tear, burst strength and folding endurance. It is finally concluded that the combination pulping process with electron beam treatment could be suggested a new alternative for non-woody fibers.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.4
• /
• pp.58-65
• /
• 2000

Use of a pectinase during preparing handmade papers from bast fiber of paper mulberry(Broussonetia kazinoki Sieb.) was investigated in order to decrease cooking chemicals and environmental pollution. For this purpose, four kinds of commercial pectinases, Rapidase LIQ(RLP), Rapidase Press(RP), Rapidase C80L Max(RCM) and Pectinase SS Kyowa(PSK) were used. And the durability of handmade papers before and after pectinase treatment was determined. RP and PSK had higher pectinase activity ad lower cellulase activity. The bast fiber was not defibered when pectinase was used. In order to increase the efficiency of enzymes, the bast fiber were treated ammonium oxalate(AO) or $K_2CO_3$under mild conditions. The AO pretreatment with those produced by $K_2CO_3$. The RP treated pulps after mild $K_2CO_3$cooking of the bast fiber were defibrated more easily than untreated pulp. The handmade paper prepared with the RP treated pulps after mild $K_2CO_3$cooking has good strength properties such as breaking length and folding endurance. Also, it has higher durability on heat aging, though its brightness was slightly lower than that of untreated paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.70-76
• /
• 1999

This study was to measure the potential of nonwoody fibrous material, kenaf. Whole stalk of kenaf, Hibiscus cannabinus was separated by two parts of bast and core portion, and cooked separately by alkaline method. Morphological characteristic was evaluated using confocal laser scanning microscope (CLSM) and fiber quality analyzer(FQA). The strength properties of handsheets, made by different mixing ration between kenaf base and core fibers, were measured. Cross-sectional area of bast fibers was smaller than that of core fibers, but the bast fibers had a thick cell wall and narrow lumen area. Bast fibers were longer in length than core fibers. Core fibers had thin cell walls, broad lumen areas, and short lengths, and they had collapsed shape even in water. These characteristics of core fibers affected strength properties of handsheet positively. When the amount of core fibers increased, the strength properties of handsheet were increased. When the amount of bast fibers increased, the handsheet had rougher surface and higher air permeability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.59-66
• /
• 2011

This study was carried out to develop the automation bark peeling process of paper mulberry for making Hanji. Nowadays, almost raw material has been imported from south-east asia for making Hanji. Raw material dependence is very high for Hanji-making by low productivity in korea. This study is focused on the resolution for problem of bark peeling automation. Water and sand jet of compressed air was possible bark peeling for black bast fiber. The effect of removing black bast fiber increased the longer the steaming time. Also using drum of bark peeling showed that results under temperature $80^{\circ}C$ and Rpm 50/min were best bark peeling and separating bast fiber from stem. The contents of holocellulose, lignin, ethanol-benzene extractives, and ash were 91.63~95.55%, 1.4~2.0%, 1.12~1.65%, and 1.4~4.3%, respectively. Chemical characteristics are similar between imported raw-material with drum bark.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.3 s.116
• /
• pp.38-46
• /
• 2006

This study was carried out to investigate the sheet properties of Morus Hanji, made by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulping, and different stocks composed to bast and whole stalk fibers. Two species of Morus, M. alba and M. lhou, were used. Pulp yield of the whole stalk parts, its brightness and opacity were higher than those of bast part. In particular sulfomethylated pulp has higher brightness of $62{\sim}63%$, than other pulps(average brightness $30{\sim}40%$). In mechanical properties, paper made of bast fiber has higher strength than those of the whole stalks. Hanji made from M. lhou, whole stalk, and sulfomethylated pulp gave better sheet formation and higher strength than those of the others. Hanji from M. alba bast fiber and whole stalk pulps were not so good sheet properties.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.109-114
• /
• 2015

In this study, the effects of chlorine dioxide (D) bleaching conditions on the delignification of hemp bast fiber were elucidated. Chlorine dioxide bleaching was carried out through three stages (DED) and five stages (DEDED), respectively. Applied amounts of chlorine dioxide at $D_1$ and $D_2$ stages were varied to find the optimum bleaching condition. It was found that the optical properties of its handsheet as well as the delignification of hemp bast fiber increased as the concentration of chlorine dioxide at $D_1$ stage increased. It was also notable that the bleachability of the DEDED bleaching stages was slightly more effective than that of the DED bleaching stages. The burst index of the handsheets made with bleached hemp bast fiber was higher than that of the unbleached samples, but the burst index of these samples decreased as their delignification increased. These results indicated that the higher concentration of chlorine dioxide at $D_1$ stage was major factor to improve the bleaching efficiency of hemp bast fiber.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.49-59
• /
• 2009

The bast fibers of paper mulberry were dyed by using sappan wood, gardenia, and gallnut extracted under various extraction conditions. The surface absorption rates, color, and sunlight fastness of the dyed fibers were compared to those of the dyed cotton and silk. The K/S values of silk showed the highest values, followed by gallnut, gardenia, and sappan wood. The optimum extraction conditions of the dye materials were 20 g/L (input amount of dye materials per liter), $90^{\circ}C$ (extraction temperature), and 30 minutes (extraction time). The values of saturation were observed to increase with the increase of the amount of dye materials, extraction time, and extration temperature. However, no effect were found on the values of hue and lightness. In all samples, the developed colors dyed by sappan wood and gardenia were the series of YR, and Y, respectively. The colors of dyed cotton and bast fibers of paper mulberry by gallnut were the series of Y and the dyed silk showed the series of YR. The values of saturation of the bast fibers of paper mulberry by sappan wood and gardenia showed the highest values of saturation, followed by cotton, and silk. In the case of gallnut, cotton showed the highest values of saturation, followed by the bast fibers of paper mulberry, and silk. The sunlight fastness were not improved in all dyeing conditions.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.96-104
• /
• 1999

Anatomical and chemical properties of three mulberry species (Morus spp) were analyzed as an alternative row material for the paper mulberry (Broussonetia kazinoki) . The pulping and papermaing characteristics of bast fiber and whole stalks by three different pulping processes, conventional alkali, alkali-hydrogen peroxide, and sulfomethylated, for the Hanji were investigated. The fiber dimension of M.bombycis was the biggest of the species. The fiber length of upper part and the fiber width and cell wall thickness of lower part were bigger than the others. The extractives and ash contents of bast fiber were higher than those of whole stalk , and holocellulose and lignin contents of whole stalk were higher than those of bast fiber. The pulp yields of M.alba bast fiber, M.bombycis whole stalk, and sufomethylated pulping were higher than the others.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.68-74
• /
• 2003

Kenaf(Hibiscus cannabinus L.) cultivar, Tainung 2, had been grown for 152 days at the experimental farm of Jinju National University, Gajoa-dong, Jinju-si, Kyongnam, Korea. The planting, growth rate, fertilization and structural characteristics as well as the cultivation and growth characteristics of kenaf, and the product usage were investigated. The narrowest diameter at kenaf bottom was 10 mm, the widest 42 mm and the average about 28 mm, and the shortest height 150 cm, the tallest 480 cm and the average about 350 cm. The weight of a core fraction was 68.1％ and a bast fraction 31.9％. The weight ratio of core material to bast fiber was 2.31. The weight ratio of dry stem was 73.5％ and that of leaves 26.5％. The weight of dry plant produced in 1 $m^2$ was 1,467 g, and about 1,052 g of stem could be used for the commercial purpose, The application of fertilizers resulted in the increase of the growth rate of the diameter at plant bottom and the height. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core.