• 펄프종이기술
• /
• 제32권4호
• /
• pp.58-65
• /
• 2000

Use of a pectinase during preparing handmade papers from bast fiber of paper mulberry(Broussonetia kazinoki Sieb.) was investigated in order to decrease cooking chemicals and environmental pollution. For this purpose, four kinds of commercial pectinases, Rapidase LIQ(RLP), Rapidase Press(RP), Rapidase C80L Max(RCM) and Pectinase SS Kyowa(PSK) were used. And the durability of handmade papers before and after pectinase treatment was determined. RP and PSK had higher pectinase activity ad lower cellulase activity. The bast fiber was not defibered when pectinase was used. In order to increase the efficiency of enzymes, the bast fiber were treated ammonium oxalate(AO) or $K_2CO_3$under mild conditions. The AO pretreatment with those produced by $K_2CO_3$. The RP treated pulps after mild $K_2CO_3$cooking of the bast fiber were defibrated more easily than untreated pulp. The handmade paper prepared with the RP treated pulps after mild $K_2CO_3$cooking has good strength properties such as breaking length and folding endurance. Also, it has higher durability on heat aging, though its brightness was slightly lower than that of untreated paper.

• 펄프종이기술
• /
• 제40권2호
• /
• pp.57-64
• /
• 2008

In general, the entire of paper mulberry bark, which is not cut into pieces with an appropriate length, have been used in the pulping. This kind of pulping method couldn't accomplish the improvement of beating and sheet forming efficiency. For this reason, we investigated the effects of the cutting length of paper mulberry bast fiber on pulping and Hanji (Korean traditional paper) properties, in order to develop high quality Hanji manufacturing process. The cutting length variation of paper mulberry white bast did not great effects on pulp yields. The pulp yields based on pulping methods were sulfomethylated pulping av. 57.4%, alkali-hydrogen peroxide pulping av. 55.4%, and alkaline pulping av. 53.5% respectively. The optical properties such as brightness, opacity, scattering coefficient, and absorption coefficient were slightly improved by the increase of paper mulberry white bast cutting length. The increase of paper mulberry white bast cutting length resulted in poor sheet formation. Physical properties such as breaking length, TEA, tear index, burst index, and folding endurance were slightly improved by the increase of cutting length. The modified pulping processes, which used sulfomethylated method and alkali-hydrogen peroxide method, showed better pulp and sheet properties than conventional alkaline pulping.

• 펄프종이기술
• /
• 제37권2호
• /
• pp.78-86
• /
• 2005

Hwaseonji(Korean traditional paper) used for writing and painting has been made from the mulberry bast-fiber and the short-length fiber pulps, wood pulps. However, besides wood pulps, other short-length fiber pulps also can be used instead of wood pulps. Hence, this research was carried out to make the various Hwaseonjis with the different properties, using the five kinds of short-length fiber pulps respectively. The short-length fiber pulps used in this research were softwood bleached kraft pulp(SwBKP) hardwood bleached kraft pulp(HwBKP), rice-straw bleached sulfite pulp(RsBSP), bamboo bleached kraft pulp(BbBKP) and recycled pulp from vellem paper(RP). And, the mixture ratios of the mulberry bast-fiber pulp and short-length fiber pulps were 100:0, 80:20, 60:40, 40:60 and 20:80. After various Hwaseonjis were made from different mixtures mentioned above with hand-made method, physical properties and chinese ink blot property of each paper were measured. The strengthes were the highest in the Hwaseonji made from the mixture of the mulberry bast-fiber pulp and SwBKP. However, chinese ink blot property and smoothness were better when RsBSP, BbBKP or RP were mixed into the mulberry bast-fiber pulp. As a result, the various kinds of Hwaseonjis which the users can choose based on their needs were made.

• 펄프종이기술
• /
• 제43권4호
• /
• pp.59-66
• /
• 2011

This study was carried out to develop the automation bark peeling process of paper mulberry for making Hanji. Nowadays, almost raw material has been imported from south-east asia for making Hanji. Raw material dependence is very high for Hanji-making by low productivity in korea. This study is focused on the resolution for problem of bark peeling automation. Water and sand jet of compressed air was possible bark peeling for black bast fiber. The effect of removing black bast fiber increased the longer the steaming time. Also using drum of bark peeling showed that results under temperature $80^{\circ}C$ and Rpm 50/min were best bark peeling and separating bast fiber from stem. The contents of holocellulose, lignin, ethanol-benzene extractives, and ash were 91.63~95.55%, 1.4~2.0%, 1.12~1.65%, and 1.4~4.3%, respectively. Chemical characteristics are similar between imported raw-material with drum bark.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.51-56
• /
• 1998

The bast fiber of paper bush misumada have been cultivated in south coast bay of the Korean peninsula were not used to handmade painting paper. Therefore, in using the bast fiber of paper bush misumada manufactured handmade painting paper, tested absorption speed, blot characteristics and organic functions. The results are summarized as follows; The handmade painting paper manufacured only the bast fiber of paper bush misumada proper to the absorption speed of China ink, didn't have difference of the length and width for blot. And it was most fitted to east writing-and-painting using. Also the flexibility excell, and light and shade in overpainting directly appeared, and fitted to black-and-white drawing. And the using increase plan of the paper bush misumada demanded.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.109-114
• /
• 2015

In this study, the effects of chlorine dioxide (D) bleaching conditions on the delignification of hemp bast fiber were elucidated. Chlorine dioxide bleaching was carried out through three stages (DED) and five stages (DEDED), respectively. Applied amounts of chlorine dioxide at $D_1$ and $D_2$ stages were varied to find the optimum bleaching condition. It was found that the optical properties of its handsheet as well as the delignification of hemp bast fiber increased as the concentration of chlorine dioxide at $D_1$ stage increased. It was also notable that the bleachability of the DEDED bleaching stages was slightly more effective than that of the DED bleaching stages. The burst index of the handsheets made with bleached hemp bast fiber was higher than that of the unbleached samples, but the burst index of these samples decreased as their delignification increased. These results indicated that the higher concentration of chlorine dioxide at $D_1$ stage was major factor to improve the bleaching efficiency of hemp bast fiber.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.68-74
• /
• 2003

Kenaf(Hibiscus cannabinus L.) cultivar, Tainung 2, had been grown for 152 days at the experimental farm of Jinju National University, Gajoa-dong, Jinju-si, Kyongnam, Korea. The planting, growth rate, fertilization and structural characteristics as well as the cultivation and growth characteristics of kenaf, and the product usage were investigated. The narrowest diameter at kenaf bottom was 10 mm, the widest 42 mm and the average about 28 mm, and the shortest height 150 cm, the tallest 480 cm and the average about 350 cm. The weight of a core fraction was 68.1％ and a bast fraction 31.9％. The weight ratio of core material to bast fiber was 2.31. The weight ratio of dry stem was 73.5％ and that of leaves 26.5％. The weight of dry plant produced in 1 $m^2$ was 1,467 g, and about 1,052 g of stem could be used for the commercial purpose, The application of fertilizers resulted in the increase of the growth rate of the diameter at plant bottom and the height. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.61-66
• /
• 2010

Corn stalk, one of the most abundant agricultural residue in the world, was examined in this study to use it as an alternative fiber source of wood fiber. In order to find the proper way to utilize corn stalk more efficiently, the morphological properties and the papermaking properties of the, bast fibers and the corn pith, were evaluated respectively. Although the bast fiber fraction showed comparable properties to those for hardwoods in the fiber properties and the papermaking properties, the pith resulted in low brightness and low drainage rate. But the short and flexible fibers in pith fraction led to dense and compact handsheet structure, correspondingly the higher sheet strength. There big differences in properties between bast fiber and pith should be considered for the fully utilization of corn stalk.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.85-95
• /
• 1998

Traditionally, Hanji had been made only with the bast fiber of paper mulberry (Broussonetia kazinoki). Nowadays, Hanji has been made mainly in the mixed forms of paper mulberry bast fiber and waste paper, and consequently it has raised many problems using them. This study was carried out to investigate the characteristics of Hanji mixed with paper mulberry bast part and whole stalk pulps. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. The sheet formations were improved as the increase of whole stalk pulp contents, while the sheet strengths were decreased. In the physical properties of the Hanji mixed with bast part and whole stalk pulps, the handsheet strengths were decreased as the increase of the whole stalk pulp contents. The tensile strength and folding endurance of the Hanji containing 40∼60% of whole stalk pulps were higher as compared to the others.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.45-52
• /
• 2007

Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.