• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.303-313
• /
• 1999

Various interpolation methods have been compared for reconstruction of LMR pin power distributions in hexagonal geometry. Interpolation functions are derived for several combinations of nodal quantities and various sets of basis functions, and tested against fine mesh calculations. The test results indicate that the interpolation functions based on the sixth degree polynomial are quite accurate, yielding maximum interpolation errors in power densities less than 0.5%, and maximum reconstruction errors less than 2% for driver assemblies and less than 4% for blanket assemblies. The main contribution to the total reconstruction error is made tv the nodal solution errors and the comer point flux errors. For the polynomial interpolations, the basis monomial set needs to be selected such that the highest powers of x and y are as close as possible. It is also found that polynomials higher than the seventh degree are not adequate because of the oscillatory behavior.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.266-269
• /
• 2003

In this work, a new formulation is presented for analyzing the transient electromagnetic response from wire antennas using the time-domain integral equation. The solution method is based on the Galerkin's method that involves separate spatial and temporal testing procedures. Piecewise triangle basis functions have been used for spatial expansion functions for arbitrarily shaped wire structures. The time-domain variation is approximated by a set of orthonormal basis functions that are derived from the Laguerre polynomials. The method presented in this paper results in very stable transient responses from wire antennas.

• 대한전자공학회논문지
• /
• 제22권5호
• /
• pp.83-86
• /
• 1985

Fredholm 제 2종 적분 방정식의 수치해법에 관한 새로운 기범을 제시하였다. 문제 영역의 절점에 데이터를 혼합 형태로 가함으로써 근사해를 구하였다. 수치 해법에서 오차를 줄이기 위하여 모든 절정에서 2번 연속 미분가능한 cubic B-spline 함수를 기저함수로 사용하였다. 기저함수로서 cubit B-spline 함수를 이용한 본 기법의 결과와 기저함수로 pulse 함수 test 함수로는 delta 함수를 이용한 모멘트법의 결과를 예제를 통하여 비교하였다. 또한 이 방법에 대한 수렴 조건을 기술 하였다.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.89-99
• /
• 2006

In this paper a new shape reconstruction method that allows us to construct surface models from very large sets of points is presented. In this method the global domain of interest is divided into smaller domains where the problem can be solved locally. These local solutions of subdivided domains are blended together according to weighting coefficients to obtain a global solution using partition of unity function. The suggested approach gives us considerable flexibility in the choice of local shape functions which depend on the local shape complexity and desired accuracy. At each domain, a quadratic polynomial function is created that fits the points in the domain. If the approximation is not accurate enough, other higher order functions including cubic polynomial function and RBF(Radial Basis Function) are used. This adaptive selection of local shape functions offers robust and efficient solution to a great variety of shape reconstruction problems.

• 한국전산유체공학회지
• /
• 제12권1호
• /
• pp.35-42
• /
• 2007

This paper describes a recent development on the divergence free basis function based on a hermite stream function and verifies its validity by comparing results with those from a modified residual method known as one of stabilized finite element methods. It can be shown that a proper choice of degrees of freedom at a node with a proper arrangement of the hermite interpolation functions can yield solenoidal or divergent free interpolation functions for the velocities. The well-known cavity problem has been chosen for validity of the present algorithm. The comparisons from numerical results between the present and the modified residual showed the present method yields better results in both the velocity and the pressure within modest Reynolds numbers(Re = 1,000).

• 한국통신학회논문지
• /
• 제11권6호
• /
• pp.388-395
• /
• 1986

Spectral domain에서 hybrid mode 분석과 Galerkin method를 사용하여 차폐된 단일, 결합 및 edge-offset 마이크로 스트립 구조의 분산특성을 고찰하였다. 진행방향의 스트립 전류에 대한 새로운 2개의 basis function이 제안되었으며 그들을 사용한 수치해의 수렵속도를 비교하였다. 결합 마이크로 스트립의 전류분포는 단일 마이크로 스트입의 전류분포로부터 Fourier변환의 shift theorem을 이용하여 얻었으며 off-centered 스트립의 분산에 대한 영향이 논의되었다. 수치 결과들은 여러가지 구조 parameter 들을 포함하여 다른 유용한 data 들과 비교한 결과 잘 일치함을 알 수 있었다.

• 호남수학학술지
• /
• 제29권2호
• /
• pp.119-192
• /
• 2007

A very important Hopf algebra is the graded Hopf algebra Symm of symmetric functions. It can be characterized as the unique graded positive selfdual Hopf algebra with orthonormal graded distinguished basis and just one primitive element from the distinguished basis. This result is due to Andrei Zelevinsky. A noncommutative graded Hopf algebra of this type cannot exist. But there is a most important positive graded Hopf algebra with distinguished basis that is noncommutative and that is twisted selfdual, the Malvenuto-Poirier-Reutenauer Hopf algebra of permutations. Thus the question arises whether there is a corresponding uniqueness theorem for MPR. This prepreprint records initial investigations in this direction and proves that uniquenees holds up to and including the degree 4 which has rank 24.

• Journal of applied mathematics & informatics
• /
• 제30권5_6호
• /
• pp.951-969
• /
• 2012

In this paper, we propose a class of meshless collocation approaches for the solution of time dependent partial differential algebraic equations (PDAEs) in terms of a radial basis function interpolation numerical scheme. Kansa's method and the Hermite collocation method (HCM) for PDAEs are given. A sensitivity analysis of the solutions from different shape parameter c is obtained by numerical experiments. With use of the random collocation points, we have obtain the more accurate solution by the methods than those by the finite difference method for the PDAEs with index-2, i.e, we avoid the influence from an index jump of PDAEs in some degree. Several numerical experiments show that the methods are efficient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.866-871
• /
• 1994

B-spline curves and surfaces are effective solutions for design and modelling of the freeform models. The control methods of these are using with control points, knot vectors and weight of NURBS. Using control point is easy and resonable for representation of general models. But the movement of control points bring out the reformation of original convex hull. The B-splines with nonuniform knot vector provide good result of the shape modification without convex hull reforming. B-splines are constructed with control points and basis functions. Nonuniform knot vectors effect on the basis functions. And the blending curves describe the prorities of knot vectors. Applying of these, users will forecast of the reformed curves after modifying controllabler primitives.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1590-1598
• /
• 1997

The paper first introduces the new concept of potential diversity and signal decomposability, which establish a foundaton to generalize the existing concepts of path and frequency diversities. Then it presents a new DS/CDMA system called chip-spreading OCDM system, which is an embodiment of the petential diversity concept that combines the path diversity of the DS/CDMA system and the frequency diversity of the OFDM/CDMA system. In the chip-spreading OCDM system the chip sequences in each symbol interval are first converted into aralled streams, which then simultaneously modulate different orthogonal Walsh basis functions. In the receiver, the received signal is matched to each extended basis-function which is the union of the transmitter basis-functions and their delayed replicas, and the matched-filtered chip samples are combined together after individual channel compensation. The conventional DS/CDMA system using the maximal ratio combining. In addition, it effectively resolves the high PAR and high sensitivity to frequency offset problems which are critical in multi-carrier systems.