• 제목/요약/키워드: basin shape

검색결과 174건 처리시간 0.018초

유역형상을 고려한 도시 단위 소유역의 유출 해석 (Runoff Analysis for Urban Unit Subbasin Based on its Shape)

  • 허성철;박상식;이종태
    • 한국수자원학회논문집
    • /
    • 제41권5호
    • /
    • pp.491-501
    • /
    • 2008
  • 도시 배수구역의 유출특성을 해석하기 위하여서는 유역의 지형특성 및 유출경로를 고려하여 소유역을 분할하고 배수계통에 대한 유출량을 분석하게 되며, 이 과정에서 각 소유역의 도달시간과 시간-면적곡선은 유역형상에 따라 상이하게 구성되므로, 이로 인한 유출특성 또한 크게 변화하게 된다. SWMM 및 ILLUDAS 모형에서는 유역형상을 단순 직사각형으로 가정하여 해석함으로써 유역의 기하학적 형상이 지표면 유출에 미치는 영향을 충분히 반영하지 못하는 한계를 개선하기 위하여, 국토해양부의 FFC2Q 모형 개발연구에서는 유역형상을 고려하여 지표면 유출해석을 실시함으로써 유출분석의 정확도를 향상시키는 기법을 도입하였다. 즉, 지표면 유출해석을 위한 시간-면적곡선법의 적용에서 단위 소유역의 형상을 대칭형(사각형, 타원형, 마름모꼴), 분산형(삼각형, 사다리꼴), 집중형(역삼각형, 역사다리꼴) 형태로 각각 유형화하여 지표면 유출해석을 하였으며, 그 결과를 비교 분석한 결과 유역의 형상에 따라 유출특성이 크게 상이함을 알 수 있었다. 실제로 배수구역(군자 배수구역)에 적용한 결과 유역형상을 직사각형 보다는 마름모꼴로 적용한 경우에 첨두유출량과 유출수문곡선의 형태에서 실측치에 보다 접근하고 있음을 보여 줌으로 써 개선된 결과를 제시하였다. 또한, 유역형상을 고려한 경우에는 첨두유출량의 경우 분할 수에 큰 영향이 없이 실측치와 유사한 안정된 값을 나타내고 있으나, 사각형으로 단순화한 경우에서는 유역 분할 수가 계산 결과치에 민감한 영향을 주었다.

경사 구조물이 침전지내 수리거동 Index에 미치는 영향 (A Study on the Effect of the Inclined Structure on the Hydraulic Behavior Index within Sedimentation basin)

  • 임성호;황준식;박노석;김성수;임경호
    • 상하수도학회지
    • /
    • 제23권5호
    • /
    • pp.517-526
    • /
    • 2009
  • This research has been conducted to investigate the characteristics of hydraulic behavior within the PAC contactor, the rectangular shape sedimentation basin without inclined tube and the other one with inclined tube those are parts of demonstration plants(capacity : $2,000m^3/d$) in Korea Institute of Water and Environment. As results of tracer tests, the flow within PAC contactor was evaluated to divided into plug flow and dead space distinctly, and characteristics of dead space was close to that of CSTR(Complete/continuous Stirred Tank Reactor). Also, considering Reynolds number, Froude number, Morill, Modal, NCSTR Inex and plug flow/mixed flow fraction, in the case of the rectangular shape sedimentation basin without inclined tube, the characteristics of flow pattern was close to CSTR. On the other hand, in the case of the basin with inclined tube, the region of CSTR decreased precisely compared with the case of no-tube. Until now we have recognized that the inclined hydraulic structure just reduces the surface loading rate within a sedimentation basin. Actually besides, the inclined structure have an important effect on the hydraulic behavior within the basin.

정수지내 사류지역이 수리학적 효율에 미치는 영향 연구 (The Effect of Dead Zone on Hydraulic Efficiency in Clearwell)

  • 이승재;신은허;김성훈;박희경
    • 상하수도학회지
    • /
    • 제21권2호
    • /
    • pp.177-185
    • /
    • 2007
  • Hydraulic efficiency($T_{10}/T$) in clearwell is often estimated by L/W ratio. However, this estimation is not accurate because other factors which give an effect on hydraulic efficiency such as shape of basin, diffuser wall and intra-basin is ignored. Therefore, in this research, hydraulic efficiency is predicted by the quantitative analysis of dead zone using CFD simulation in a pilot scale clearwell. The results show that the reason why higher L/W ratio increase the hydraulic efficiency is to decrease the dead zone of linear region which is located between baffles. Diffuser wall or intra-basin also affects on hydraulic efficiency with this process. Also, we conclude that hydraulic efficiency can not be reached to 0.8 or higher.

비대칭 유역형상에 대한 이동강우의 유출영향분석 (Runoff Analysis due to the Moving Rainstorms on the Nonsymmetric Basin Shapes)

  • 전민우
    • 한국습지학회지
    • /
    • 제11권1호
    • /
    • pp.1-13
    • /
    • 2009
  • 비대칭형상의 유역에서 이동강우로 인한 유출영향을 운동파이론을 적용하여 분석하였다. 이동강우 분포형은 균등분포형, 전진형, 지연형 및 중앙집중형을 사용하였고, 비대칭유역형상은 정사각형, 신장형, 및 장방형유역에 대하여 분석하였다. 다양한 이동속도를 가진 이동강우가 비대칭유역의 상류, 하류 및 횡방향으로 이동할 때 유출수문곡선을 모의하여 그 특성을 대칭유역과 비교분석하였다. 하류방향에 대하여 신장형유역에서 대칭과 비대칭유역의 첨두유량 차이가 가장 작은 반면에 장방형유역에서 가장 큰 차이를 보여주고 있으며, 이것은 상류방향에서도 동일하게 나타났다. 횡방향에서는 대칭, 좌비대칭 및 우비대칭유역 모두 지연형 강우에서 가장 큰 첨두유량을 그리고 전진형강우에서 가장 작은 첨두유량을 보이고 있다. 첨두시간은 장방형유역에서 가장 길게 나타나고 신장형유역에서 가장 짧게 나타났다.

  • PDF

LAG TIME RELATIONS TO CATCHMENT SHAPE DESCRIPTORS AND HYDROLOGICAL RESPONSE

  • Kim, Joo-Cheol;Kim, Jae-Han
    • Water Engineering Research
    • /
    • 제6권2호
    • /
    • pp.91-99
    • /
    • 2005
  • One of the most important factors for estimating a flood runoff from streams is the lag time. It is well known that the lag time is affected by the morphometric properties of basin which can be expressed by catchment shape descriptors. In this paper, the notion of the geometric characteristics of an equivalent ellipse proposed by Moussa(2003) was applied for calculating the lag time of geomorphologic instantaneous unit hydrograph(GIUH) at a basin outlet. The lag time was obtained from the observed data of rainfall and runoff by using the method of moments and the procedure based on geomorphology was used for GIUH. The relationships between the basin morphometric properties and the hydrological response were discussed based on application to 3 catchments in Korea. Additionally, the shapes of equivalent ellipse were examined how they are transformed from upstream area to downstream one. As a result, the relationship between the lag time and descriptors was shown to be close, and the shape of ellipse was presented to approach a circle along the river downwards. These results may be expanded to the estimation of hydrological response of ungauged catchment.

  • PDF

유역특성인자를 이용한 설계홍수량 추정에 관한 연구 (Study of Design Flood Estimation by Watershed Characteristics)

  • 박기범
    • 한국환경과학회지
    • /
    • 제15권9호
    • /
    • pp.887-895
    • /
    • 2006
  • Through this research of the analysis on the frequency flood discharges regarding basin property factors, a linear regression system was introduced, and as a result, the item with the highest correlation with the frequency flood discharges from Nakdong river basin is the basin area, and the second highest is the average width of basin and the river length. The following results were obtained after looking at the multi correlation between the flood discharge and the collected basin property factors using the data from the established river maintenance master plan of the one hundred twenty-five rivers in the Nakdong river basin. The result of analysis on multivariate correlation between the flood discharges and the most basic data in determining the flood discharges as basin area, river length, basin slope, river slope, average width of basin, shape factor and probability precipitation showed more than 0.9 of correlation in terms of the multi correlation coefficient and more than 0.85 for the determination coefficient. The model which induced a regression system through multi correlation analysis using basin property factors is concluded to be a good reference in estimating the design flood discharge of unmeasured basin.

중소하천유역의 임계지속시간 결정에 관한 연구 (Study on the Critical Storm Duration Decision of the Rivers Basin)

  • 안승섭;이효정;정도준
    • 한국환경과학회지
    • /
    • 제16권11호
    • /
    • pp.1301-1312
    • /
    • 2007
  • The objective of this study is to propose a critical storm duration forecasting model on storm runoff in small river basin. The critical storm duration data of 582 sub-basin which introduced disaster impact assessment report on the National Emergency Management Agency during the period from 2004 to 2007 were collected, analyzed and studied. The stepwise multiple regression method are used to establish critical storm duration forecasting models(Linear and exponential type). The results of multiple regression analysis discriminated the linear type more than exponential type. The results of multiple linear regression analysis between the critical storm duration and 5 basin characteristics parameters such as basin area, main stream length, average slope of main stream, shape factor and CN showed more than 0.75 of correlation in terms of the multi correlation coefficient.

도시유역 저류지 위치에 따른 우수유출저감효과 분석 (Analysis of Rainfall Runoff Reduction Effect Depending upon the Location of Detention Pond in Urban Area)

  • 이재준;김호년
    • 대한토목학회논문집
    • /
    • 제28권5B호
    • /
    • pp.535-546
    • /
    • 2008
  • 도시화는 유출량의 증가와 도달시간의 감소에 영향을 미치고 있으며, 이는 하류 지점의 빈번한 범람을 야기시키고 있다. 따라서 유역내에 침투시설과 저류시설 등 유출저감효과를 기대할 수 있는 여러 가지 시설을 이용하여 유출량을 저감시킬 수 있는 각종 규모의 지체저류시설을 활용하게 되었다. 본 연구에서는 세가지의 형태(세장형(SF=0.204), 집중형(SF=0.782), 중간형(SF=0.567))로 유역을 가정하여 일반적으로 유역 말단에 설치하던 유수지(저류지)를 유역내의 임의의 위치에 설치하여 단일저류지와 복수 저류지에 대해 각각 유출저감효과를 분석하고, 이들 저류지의 위치관련변수와 수문학적으로 분석하였다. 단일 저류지의 위치에 따른 유출저감효과를 분석하기 위해 유역의 형상에 따라 저류지의 위치는 전체 유역면적에 대한 저류지 상류부 면적의 비(이하 저류지 상류부 면적비, DUAR(Dimensionless Upstream Area Ratio)이라 한다)를 20%, 40%, 60%, 80%로 변동시키면서 모의분석을 수행하였으며, 복수 저류지의 위치에 따른 유출저감효과를 분석하기 위해 단일 저류지 분석시 적용한 유역형상 중 중간형 유역을 대상으로 하여 방류구조와 유역의 제반사항은 단일 저류지의 모의시와 동일하게 가정하였고, 저류지가 분담하는 유역의 면적비를 바탕으로 하여 DUAR 60%, 80%, 100%, 120%, 140%의 경우에 대해 분석하였다. 이 때 저류지 바닥면적(Ab)의 크기는 유역면적에 대해 각각 1%와 0.5%를 취하는 경우의 두 가지로 구분지어 모의분석을 실시하였다. 저류지의 위치에 따른 유출저감효과를 분석한 결과 세장형의 유역이 적은 저류량에 대해 유출저감효과가 우수하였으며, 저류지의 위치 관련변수의 관계도 및 관계식을 제시하였고, 이를 시험유역에 적용시켜 검증하였다. 저류지 위치 관련변수의 관계도 및 관계식을 이용하여 단일 저류지와 복수 저류지의 개략적인 위치선정 기준을 제안하였다.

댐 물넘이의 End Sill 위치 및 형상에 따른 수리특성 (Hydraulic Characteristics in Stilling Basin Varying by Position and Shape of End Sill)

  • 박영욱;황보연;권순국
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2003년도 학술발표논문집
    • /
    • pp.459-462
    • /
    • 2003
  • This study aimed at proposing the optimum design of stilling basins in dam spillways by analyzing hydraulic characteristics for various positions and shapes of end sills through the hydraulic model test. The performance of energy dissipating in the case of vertical shape of end sill was much better than the case of inclined shape. Moreover, we could confirm that no further improvement in hydraulic characteristics at stilling basin as well as downstream of the river were made if the height of end sill was increased up EL 50m, e.g., the proposed design value by computation.

  • PDF

유역형상에 따르는 이동강우의 유출영향분석(I) - 대칭유역형상 - (Runoff Analysis due to Moving Storms based on the Basin Shapes (I) - for the Symmetric Basin Shape -)

  • 한건연;전민우;김지성
    • 대한토목학회논문집
    • /
    • 제26권1B호
    • /
    • pp.15-25
    • /
    • 2006
  • 유역형상의 변화에 따라서 이동강우가 유출에 미치는 영향을 운동파이론을 적용하여 분석하였으며, 유역형상은 신장형유역과 정사각형유역 및 장방형유역에 대하여 분석하였고, 이동강우 분포형은 균등분포형, 전진형, 지연형, 중앙집중형을 사용하였다. 이와 같은 형상의 유역에 대하여 다양한 이동속도를 가진 강우가 유역내 하천의 상류방향, 하류방향, 횡방향으로 이동할 때 강우분포형에 따르는 유출수문곡선을 모의하여 그 특성을 비교분석하였다. 유출수문곡선의 모양과 첨두시간, 첨두유량은 시간적, 공간적으로 변화하는 강우와 유역형상에 의하여 크게 영향을 받는다. 횡방향의 이동강우에서는 상류방향과 하류방향의 경우보다 더 큰 첨두유량이 발생하며, 하류방향 이동강우의 첨두유량은 상류방향의 첨두유량보다 더 크게 나타났다. 신장형유역의 경우 하류방향 이동강우의 첨두시간은 상류방향과 횡방향의 경우보다 더 지체되며, 수문곡선의 총유출량과 기저시간은 강우속도가 증가함에 따라 감소하였다.