• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.64-74
• /
• 2007

The marine seismic prospecting using a research vessel in the shallow sea near the coastal area has certain limits according to the water depth and survey environment. Also, for the electrical resistivity survey at seashore area, one may need a specially designed high-voltage source to penetrate the very conductive surface layer. Therefore, we have conducted a feasibility study on the application of magnetotelluric method (MT), a passive geophysical method, on investigating of shallow marine environment geology. Our study involves both theoretical modeling and field survey at the tidal flat area which represent the very shallow marine environment. We have applied the audio-frequency magnetotelluric (AMT) method to the intertidal deposits of Gunhung Bay, west coast of Korea, and analysed the field data both qualitatively and quantitatively to investigate the morphology and sedimentary stratigraphy of the tidal flat. The inversion of AMT data well reveals the upper sedimentary layer of Holocene intertidal sediments having a range of 13-20 m thickness and the erosional patterns at the unconformable contact boundary. However, the AMT inversion results tend to overestimate the depth of basement (30-50 m) when compared with the seismic section (27-33 m). Since MT responses are not significantly sensitive to the resistivity of middle layer or the depth of basement, the AMT inversion result for basement may have to be adjusted using the comparison with other geophysical information like seismic section or logging data if possible. But, the AMT method can be an effective alternative choice for investigating the seashore area to get important basic informations such as the depositional environment of the tidal flat, sea-water intrusion and the basement structure near the sea shore.

• Journal of Korean Society of Forest Science
• /
• v.70 no.1
• /
• pp.91-102
• /
• 1985

Growth and biomass production of natural stands of Quercus variabilis in relation to tree density were studied to obtain basic guide lines for future tending operation. Two natural stands of Quercus variabilis located at 900m (A stand: 6,600trees/ha, $15.84m^2/ha$, $\frac{19}{17-20}$) and 800m (B stand: 4,300trees/ha, $16.65m^2/ha$, $\frac{20}{17-21}$) elevation in Sancheong, Kyongnam Province were selected for the comparative study and following results were obtained through a sample plot method. After diameter of individual trees in the sample plots was measured, twelve average trees from each diameter class were cut felled to measure dry weight of $W_S$, $W_B$, $W_L$, $W_{Ba}$, and standing biomass and biomass production rates by a allometrior regressions related to $D^2H$. Vertical distribution of leaves along the stems indicated that photosynthesis was carried out 2.2m above the ground in Stand A and 1.2m in Stand B. Maximum photosynthesis was located 4.2m and 6.2m above the ground in Stand A and B, respectively. Leaf area index was 4.25ha/ha for Stand A, and 3.89ha/ha for Stand B. Above-ground standing biomass was 49.51 ton/ha for Stand A and 59.20 ton/ha and net annual production was 6.75 ton/ha/yr. for Stand A and 8.99 ton/ha/yr. for Stand B. The ratio of net annual production to standing biomass was 17.5% for Stand A and 16.7% for Stand B. Net assimilation rate was 2.75kg/kg/yr. for Stand A and 3.58kg/kg/yr. for Stand B. Stem wood production rate was 1.46kg/kg/yr. for Stand A and 2.09kg/kg/yr. for Stand B. Bark production rate was 0.60 kg/kg/yr. for Stand A and 0.34kg/kg/yr. for Stand B. Above data indicated that Stand B utilized growing spaces and sites more efficiently than Stand A. It is concluded chat productivity of natural stands of Quercus variabilis can be enhanced through optimization of basal areas and number of tree per hectare and that sound management of natural oak stands should be based on systematic sampling of the area for periodic productivity estimation.

• Journal of Korean Society of Forest Science
• /
• v.84 no.2
• /
• pp.131-144
• /
• 1995

To determine the structure of chromosome and to identify the sex chromosome of Ginkgo biloba and G. biloba var. fastigiata, the samples were obtained from root tips of trees growing in seven different provinences. The results are as follows. The basic number of somatic chromosomes was 2n=24. The range of a relative length of long chromosome was between $14.88{\sim}11.18{\mu}m$ and that of short chromosome was $8.11{\sim}6.24{\mu}m$. The chromosome sets were composed with one long pairs of m type and 11 short pairs of sm or st type. These short pairs showed the continuous descending in length. There was a satellite on the short arm of the Longest chromosome pair, and were satellites of the one or both long arm of 7th or 8th chromosome pair which were sm or st type, or the shortest st type chromosome pair. Sometimes, a satellite on the short arm of the longest chromosome pairs of Ginkgo biloba was double satellite, but that of G. biloba var. fastigiata was not. Karyotype was $2n=24=2^{2s}A^m+2B^{st\;or\;sm}+2C^{st}+2D^{st}+2E^{st}+2F^{st\;or\;sm}+2G^{sm}+2^{2s}H^{sm}\;or\;(^{1s}H^{sm}+H^{sm})+2I^{st}+2J^{st}+2K^{st}+2^{2s}L^{st}\;or\;(^{1s}L^{st}+L^{st})$. The male and female trees were not apparently distinguished by the chromsome structures. However the differences between the satellites could be used to identify the male and females. The male tree has double satellite on short arm of a longest chromosome pairs and females' has not. Also female trees have a satellite on a short chromosome more frequently than male trees.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.144-152
• /
• 2010

This study was conducted to analyze the growth characteristics and aboveground carbon storage for old growth Zelkova serrata artificial forests (site1: age class IX, site2: age class VIII) in Gwangneung Experimental Forest. The trees were classified by crown classes for analyzing forest stand structure. The growth characteristics were analized through ringwidth increment by crown classes and stem analysis of dominant trees. There were a wide range of DBH (site1: 8~62 cm, site2: 14~40 cm) and height (site1: 8~26 m, site2: 12~26 m) distributions and revealed different growth characteristics by crown classes in both sites. The mean annual increment (MAI) of ringwidth for the last 5 years of dominant trees for site1 (3.3 mm) was higher than MAI of ringwidth of total growth period (2.3 mm) and MAI of ringwidth for the last 5 years of dominant trees for site2 (2.2 mm) was equal to MAI of ringwidth of total growth period (2.2 mm). Also, the growth increment of ringwidth by crown classes had significant differences between dominant tree and the others crown classes (p<0.01) in both sites. As a results of stem analysis of dominant trees in both sites, there were similar to their volume between site1 (1.106 $m^3$) and site2 (1.035 $m^3$). In spite of old age, the annual increment of volume has been increasing steadily until recent year. Meanwhile, total aboveground carbon storage of site1 (65.6 Mg C $ha^{-1}$) was higher than that of site2 (56.1 Mg C $ha^{-1}$). The proportion of dominant and co-dominant trees to total aboveground carbon storage was more than 90% and the greatest individual aboveground carbon storage by crown classes was dominant tree in all both sites. However, individual aboveground carbon storage of dominant tree in site1 had 0.054 Mg C $tree^{-1}$ more than site2 owing to the differences from average DBH of dominant trees by sites. We think that these results will contribute to the forest practice for Zelkova serrata artificial forests as a basic information.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.333-340
• /
• 2015

Because soils in reclaimed lands nearby coastal areas have much higher salinity and moisture content than soils in inland area, parts of greenhouses embedded in such soils are exposed to highly corrosive environments. Owing to the accelerated corrosion of galvanized steel pipes for substrucrture and structure of greenhouses in saline environments, repair and reinforcement technologies and efficient maintenance and management for the construction materials in such facilities are required. In this study, we measured the corrosion rates of the parts used for greenhouse construction that are exposed to the saline environment to obtain a basic database for the establishment of maintenance and reinforcement standards for greenhouse construction in reclaimed lands with soils with high salinity. All the test pipes were exposed to soil and water environments with 0, 0.1, 0.3, and 0.5% salinity during the observation period of 480 days. At the end of the observation period, salinity-dependent differences of corrosion rate between black-surface corrosion and relatively regular corrosion were clearly manifested in a visual assessment. For the soils in rice paddies, the corrosion growth rate increased with salinity (0.008, 0.027, 0.036, and $0.043mm{\cdot}yr^{-1}$ at 0, 0.1, 0.3, and 0.5% salinity, respectively). The results for the soils in agricultural fields are 0.0002, 0.039, 0.040, and $0.039mm{\cdot}yr^{-1}$ at 0, 0.1, 0.3, and 0.5% salinity, respectively. The higher corrosion rate of rice-paddy soil was associated with the relatively high proportion of fine particles in it, reflecting the general tendency of soils with evenly distributed fine particles. Hence, it was concluded that thorough measures should be taken to counteract pipe corrosion, given that besides high salinity, the soils in reclaimed lands are expected to have a higher proportion of fine particles than those in inland rice paddies and agricultural fields.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.301-309
• /
• 2017

This study was conducted to provide basic data needed to calculate the crop loads for the greenhouse design. Four countries' crop loads for greenhouse structures were compared and the crop loads were measured directly and analyzed for various greenhouse crops, including tomato, strawberry, cucumber, and eggplant. According to the analysis results of four country's standards for the design crop loads, it was judged that the new design crop loads suit for greenhouse crops in our country should be suggested because our standards just used the design crop loads of other countries. The maximum crop loads per plant of tomato, cucumber, eggplant, and strawberry were 3.9, 0.75, 1.9 and $2.1kgf{\cdot}plant^{-1}$, respectively. The crop load per unit area of tomato was $8.5kgf{\cdot}m^{-2}$, which was much greater than the cucumber and eggplant's crop load of 2.1 and $2.4kgf{\cdot}m^{-2}$ respectively. The crop loads of tomato and cucumber, suggested by the greenhouse structure design standard of Korea, is $15kgf{\cdot}m^{-2}$, which is far greater than the values suggested by this research. It was judged that this was because our standard just used the Dutch standard, our crop load standard should be reviewed considering this difference. The crop load of strawberry, including the growing bed, was $21.0kgf{\cdot}m^{-2}$, which was much greater than the crop load in the Dutch standard.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.279-287
• /
• 2020

Recently, interest in radiation protection is increasing because of the occurrence of accidents related to exposure dose. So, the nuclear safety act provides to install the shields to avoid exceeding the dose limit. In particular, when the worker conducts the non-destructive testing (NDT) without the fixed shielding structure, we should monitor the access to the workplace based on a constant dose rate. However, when we apply for permits for NDT work in these work environments, the consideration factors to the estimation of the distance and exposure dose are not legally specified. Therefore, we developed the excel model that automatically calculates the distance, exposure dose, and cost if we input the factors. We applied the assumption data to this model. As a result of the application, the distance change rate was low when the thickness of the lead blanket and collimator is above 25 mm, 21.5 mm, respectively. However, we didn't consider the scattering and build-up factor. And, we assumed the shape of the lead blanket and collimator. Therefore, if we make up for these limitations and use the actual data, we expect that we can build a database on the distance and exposure dose.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2008

The purpose of this study was to confirm the exactitude of in vitro nuclear magnetic resonance spectroscopy(NMRS) and to complement the defect of in vivo NMRS. It has been difficult to understand the metabolism of a cerebellum using in vivo NMRS owing to the generated inhomogeneity of magnetic fields (B0 and B1 field) by the complexity of the cerebellum structure. Thus, this study tried to more exactly analyze the metabolism of a canine cerebellum using the cell extraction and high resolution NMRS. In order to conduct the absolute metabolic quantification in a canine cerebellum, the spectrum of our phantom included in various brain metabolites (i.e., NAA, Cr, Cho, Ins, Lac, GABA, Glu, Gln, Tau and Ala) was obtained. The canine cerebellum tissue was extracted using the methanol-chloroform water extraction (M/C extraction) and one group was filtered and the other group was not under extract processing. Finally, NMRS of a phantom solution and two extract solution (90% D2O) was progressed using a 500MHz (11.4 T) NMR machine. Filtering a solution of the tissue extract increased the signal to noise ratio (SNR). The metabolic concentrations of a canine cerebellum were more close to rat’s metabolic concentration than human’s metabolic concentration. The present study demonstrates the absolute quantification technique in vitro high resolution NMRS with tissue extraction as the method to accurately measure metabolite concentration.

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.352-366
• /
• 2015

The purpose of this study is to offer the basic data to the habitat conservation and management by surveying and analysing the ecological characteristics such as the flora, vegetation structure and soil of Rhodotypos scandens habitat. The flora were summarized as 131 taxa including 57 families, 99 genera, 107 species, 1 subspecies, 17 varieties and 6 forms. The life forms grouped as in the follows; the megaphanerophytes(MM) were 21 taxa, 24 taxa of the microphanerophytes(M), 30 taxa of nanophanerophytes(N), 6 taxa of chamaiphytes(Ch), 20 taxa of hemicryptophytes(H), 17 taxa of geophytes(G), 12 taxa of therophytes(Th) and 1 taxa of hydrophytes(HH). The present conditions of communities were 8 types including Zelkova serrata, Quercus aliena, Ulmus parvifolia, Rhamnella frangulioides, Castanea crenata, Albizia julibrissin, Celtis sinensis and Robinia pseudoacacia. In case of the dominant species by layers, the tree layer species were Zelkova serrata, Quercus aliena, Ulmus parvifolia, Castanea crenata, Albizia julibrissin, Celtis sinensis and Robinia pseudoacacia, and the subtree layer species were Rhamnella frangulioides, Q. aliena, Z. serrata, A. julibrissin, U. parvifolia and Broussonetia kazinoki. The shrub layer species was Rhodotypos scandens. In the results of analyzing the diversity index, $H^{\prime}{_{max}}$ from 1.691 to 2.610, from 2.197 to 3.466 in H'max, from 0.646 to 0.903 in J' and from 0.097 to 0.354 in D. In the results of analysing the soil, there showed that acidity was 5.6, 0.5dS/m of electrical conductivity(EC), 59.1mg/kg of available $P_2O_5$, 49.7% of organic matter content, $0.4cmol^+/kg$ of exchangeable $K^+$, $13.5cmol^+/kg$ of exchangeable $Ca^{2+}$, $3.3cmol^+/kg$ of exchangeable $Mg^{2+}$.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.1-7
• /
• 2004

Roads, like bikeways, parkways and walks, are to be just capable of supporting light traffic and traveling public, but they are required to be human friendly and environmental-oriented. Lately soil-solidifier mixture, a kind of soil-cement, has developed and has been applied to the recycling and environment-oriented pavement as the surfacing material. Soil-solidifier pavement structure has been designed by only experience. To design this pavement mechanically, it is necessary to find out basic engineering properties of soil-solidifier mixture. This study focuses on finding out mechanical characteristics of the mixture according to mixture proportions and aging. Test molds with various mixture proportions are made, and then unconfined strength tests are performed for test molds with aging of the mixture. As the result of this study, it is found that the strength of the mixture increases with amount of cement and that maximum strength is achieved at 6%$\sim$8% of the ratio of solidifier and water. The strength increase rapidly until 14 days, after then slowly. After 28 days the strength of the mixture approaches to the constant value. The heat of hydration during curing of the mixture is measured no significantly. It also shows that temperature characteristics of the mixture is similar to that of soil. Since this mixture is mixed with soil and is able to improve engineering problems in pavement due to temperature, this mixture is expected to use effectively in the environment-oriented pavement for light traffic.