• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1125-1136
• /
• 2000

Fitness of clothes becomes a major concern in apparel industry. Development of basic patterns will enhance the fitness of clothes. But there are few slacks patterns for the middle-high school girls. So girls had difficulties to buy ready-made clothes of good fit. To solve this problem, it is necessary to develop basic slacks patterns. The purposes of this study was to develop basic slacks patterns based on the analysis of lower body types. 4 girls were selected among 402 anthropometric measurement subjects who are 13 to 15 year-old for the wearing tests. The result of this study can be summarized as follows; 1. Analysing the replicas of lower body surface by using gypsum method, slack patterns were developed. 2. Wearing test by the sensory evaluation showed that the developed slacks pattern was estimated more highly than existing patterns in the items of the comfort of front crotch and back crotch. 3. Wearing test by moire topography method represented that garment silhouette of developed slacks pattern was estimated more highly and garment space of waist, hip were significantly different among patterns.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.360-365
• /
• 2000

This research is the trial for the computation of the ease-rate for the bodice pattern. The result of the analysis about the cross section figures of garment space by using a 3-D measuring instrument is that: The garment space of each bodice by each body size is definite. In the figure of cross section of the basic lines, an area of cross section of garment space and length of cross section of garment space are not increased in proportion to an area of cross section of the body. The ease rate is the same no matter that flat-rate of the body is same or different. The ease-rate is computed by length of cross section of garment space that is in proportion to the radius of the body.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.101-113
• /
• 2016

This study was conducted in order to analyze draping and flat pattern according to jacket design, and provide basic materials for developing a jacket pattern that can enhance fitness, functionality, and aesthetic expression of clothes by reflecting esthetic expression of draping and efficiency of flat pattern at the same time. For the experimental jacket designs of a one-piece sleeve jacket and a two-piece sleeve jacket were selected among the entries of the designer Rubina for 2014 F/W Seoul Fashion Week. Designer brand Rubina usually produced clothes using draping and the designer brand company provided the experimental patterns for the study. We also had flat patterns of the same design and size specifications designed by a flat patternmaker who has 30 year-experience in flat pattern like Rubina. The test apparel jacket was made of 20's cotton yarns. Three models wore the jackets and evaluation on appearance fitness was conducted by 7 members in an expert panel group from August 10, 2015 to September 10, 2015. As a result of appearance fitness analysis on one-piece sleeve jacket, there were significant difference in 4 items among 17 items in terms of overall appearance. The appearance of jackets by draping had higher score than those using flat pattern. As for two-piece sleeve jacket, there were significant differences in 7 items among 17 items related to overall appearance. As for the items related to sleeve, 5 items out of 13 showed significant differences. Except for one item, appearance of jackets using draping had higher score than flat pattern. As for motion fitness, draping was evaluated to be more comfortable. Applying the items with high scores in appearance and motion fitness in draping to flat pattern, The study suggests a new jacket pattern development that would increase the satisfaction of consumers for future research.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1399-1408
• /
• 2011

This study analyzes the current educational curricula in the field of clothing construction to provide some fundamental information for developing more appropriate educational courses and to activate the fashion business. A total of 82 different departments related to fashion and apparel were selected from four-year domestic universities and the curricula recently posted on their internet websites were analyzed by descriptive statistics. More than half (53.7%) of the 82 departments were offering classes in the clothing construction field for 3 credits and 4 class hours. College affiliation of the departments that offered curricula in the clothing construction field was classified into 5 categories: the arts (34), human ecology (22), natural sciences (14), humanities/culture (9), and others (3). Human ecology category showed the highest results in the average class hours (3.9), the number of classes in the clothing construction field (7.6), and the percentage of the classes in the clothing construction field out of all major classes offered by the clothing department (19.9%). All 82 departments were classified into 3 categories of: fashion design (32), clothing (28), and fashion business (22). The clothing category showed the highest results in the average credits (2.8), class hours (3.8), the number of classes offered by the clothing construction field (7.6), and the percentage of the classes that offer clothing construction education out of all major classes offered by the clothing department (19.9%). The educational contents of clothing construction area were classified into 8 different categories of: basic theory and sewing, clothing construction, flat pattern, draping, tailoring and advanced clothing construction, pattern CAD, sewing science and apparel manufacturing process, and clothing construction for special needs. Among these categories, the draping category constituted 21.7% as the largest part. In addition, the distribution of classes offered by 4 academic years were analyzed into 8 different categories.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.354-363
• /
• 2010

The purpose of this study was to provide some preliminary results on application of 3D scan data of head shapes to the hat design and pattern-making. This paper defined necessary measurement items and concepts in 3-dimensional images of head shapes. And also it presented the methodology to pattern-making of 6-piece crown hat based on 3D data. It used the data of Size Korea to pick up and choose a head shape model with the average head size of Korean women in their twenties. Main results were: 1. The 3D scan data of head shape was better than the 1 dimensional measurement data. Because I could establish a hat pattern-making theory by the 3D scan data of head. 2. The 3D scan data provided the basis for conceptualization of basic measurement points and items for a better fit of hats as well as the definition of the basic hat circumference. 3. This presented a methodology for analyzing out head shape by 3D scan data, and allowed the derivation of the basic hat circumference from the maximum head circumference. 4. As the 6-piece Crown cloche hat made by this method fitted the head shape model perfectly, this methodology could suggest potential applicability to various hat design.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.88-98
• /
• 2005

This study focuses on the needs at both consumers and manufacturers. It aims to find ways for consumers to purchase outfits that would fit their particular body type and preferences at reasonable prices, choose raw materials and style at garments, and virtually try them on. In addition, the study is designed to help apparel manufacturers identity customers' changing needs, reduce inventories, manage information on customers' body type in a digitalized form, and eventually contribute to promoting electronic commerce. Based on nine basic patterns that tit each subject, 108 virtual garments are created by adjusting the size of the patterns (9 subjects $\times$ 4 body parts $\times$ 3 patterns = 108 outfits). In order to determine fitting preferences for each body part and find optimized conditions, cross-tabulation analysis including $X^2$ and frequency analysis were performed to measure the appearance rate. A style of virtual garment, which is minus 2cm from chest size was chosen as the most appropriate pattern to the baseline location of front the chest. For the waist parts, the C style as an appropriate virtual garment to front and back view. In the front, lateral and back view, a style was chosen in the response to the sleeve-bodice combinations, the ease amount of armhole area, the armhole depth and the loosening of tightening or armhole line.

• Journal of Fashion Business
• /
• v.5 no.2
• /
• pp.129-147
• /
• 2001

The purpose of this study is to survey and analyze domestic fashion education institution's program on apparel prototype and thereupon, address the problems and find their solutions, and thereby, provide for some basic data useful to improve the basic patterns of apparel and ultimately, help reinforce the professional and practical apparel design education. The results of this study can be summarized as follows; 1. 85.1% of the subjects finished graduate or higher courses. Almost all of the college and junior college teachers finished graduate or higher courses, while only 31.6% of those teaching at technical institutes finished graduate or higher courses. Such a finding suggests that colleges tend to employ their faculty members based on their academic background but that technical institutes value the practical ability of their faculty more. 2. As a result of surveying the types of basic patterns used by teachers, it was found that 72.3% of them were using two or more patterns. The basic pattern preferred most by our teachers was Japanese culture institute's type (71.3%), followed by the US FIT type (24.5%), Lim Won-Ja's type (22.3%), French ESMOD type (17.0%). 96.3% of our apparel design students were making their basic patterns as instructed by their teachers. 3. 67.0% of our students were using their conceived sizes for production of their basic patterns, 14.9% were referring to the ready-made sizes, 8.5% were relying on their teachers' individual experiences, and 9.6% were using their own cord sizes. In order to survey the difference between teachers' sizes (ready-made sizes or individual experienced ones) and business sizes used, the basic body measurements used for ready-made apparels were surveyed to be compared with the national standard body sizes set in 1997 for women aged between 18 and 24. As a result, it was found that the ready-made sizes used for apparel production prototypes than teachers' ones were nearer the national standard sizes. Such a finding suggests that it may well be necessary for teachers to be more connected with the apparel businesses and thereby, teach their students in a more realistic way with correct information. 4. 83.0% of the subject teachers were tacking their basic patterns to be well fitting, and 76.9% of these teachers were tacking the patterns in reference with students' individual body sizes. In all, 97.4% of the subject teachers were guiding the tacking process, which suggests that the flat patternmaking is taught primarily for customized apparels. As a result of comparing the fitness of basic patterns with those of each body part, it was found that teachers were most dissatisfied with the fitness of shoulders and arm hole depth. Therefore, it will be necessary to reclassify the body types or find other drawing techniques to improve the fitness of such body parts. Nevertheless, teachers were willing much (4.18) to develop their own educational basic patterns for themselves. Lastly, it is hoped that this study will be followed up by future studies on educational prototypes covering diverse body shapes and those on practical implementations of those prototypes for students.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.68-79
• /
• 2009

It is inevitable to have cutting line to get the 2D pattern from 3D body surface. In this paper the efficiency of curvature plot as a cutting line in the process of flattening 3D surface was investigated. As reference, basic clothing construction line was adopted to divide the 3D surface into small blocks to make the flattening process easy. Female dummy as well as human body were scanned and surface of the upper body was segmented using curvature plot and basic constructing line. 2D tight-fit pattern was developed using three software, the RapidForm 2004, 2C-AN and Yuka CAD. Gap between clothes and body, and the clothing pressure on the body was observed to determine the fit of the clothes. As results, clothes constructed with blocks divided by curvature plot displayed a similar level of tight fit as compared with those by basic construction line. It was found that curvature plot is effective method as a segmentation of the 3D surface even for the actual body which does not have any previous reference line. It is expected that application of curvature plot will be expanded in 3D apparel technology.

• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.99-108
• /
• 2009

The purpose of this study is to analyze the middle-aged British women's apparel purchase behavior. The results of this study can be used to present the tendency of Korean middle-aged women's apparel purchase behavior when they become the old-aged by comparing and analyzing the British women's purchase behavior. We found that they prefer to choose and purchase their clothes by their own decision-making and search for actively the new brands for old age. Strong willingness was showed that their level of consumption amounts for clothing would be the same level between middle-aged and old-aged. It was also presented that they like to see a old-aged fashion model for fashion advertisement rather than a younger one and prefer to use the expression of 'mature' rather than a stereotypical expression such as a silver, gray and gold. The segmentation of fashion market by age can not be simply standardized. We expect that the propensity for clothing purchase behavior pattern of middle-aged women will not be changed and keep the same tendency by the time of their old-aged. We expect that this research results can be used as a basic material for another study and setting up the product developments and marketing strategies.

• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.457-467
• /
• 2006

The following research compares two mostly-used apparel systems that are used in colleges of Korea, Gerber and PAD, by analyzing advantages and disadvantages of their Dart, Tuck and Pleats-related functions in pattern construction process. The results are the following: First, regarding transformation methods, Gerber system was able to use pivot method, while PAD system was able to use both pivot and slash method. As for movement, distribution, synthesis, folding, producing additional Dart function, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart can be produced only in PAD system, while none of curvy shaped Dart can be produced in both systems. Second, as for pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes and need for correction. Third, when constructing according to the type of Tuck, we could distribute multiple Darts at a time with PAD system, while with Gerber system, distribution into multiple Darts at a time was impossible at all. Fourth, when constructing according to the contour of Pleats, Gerber system made it possible to make construction of multiple lines and box/inverted Pleats with just one order, but PAD system required repetitive tasks, which remains room for enhancement in regard to such inefficiency.