• 정보처리학회논문지D
• /
• 제15D권1호
• /
• pp.73-86
• /
• 2008

최근 RFID(Radio Frequency Identification) 기술은 사물에 대한 자동적인 인식을 가능케 함으로써 물류, 의료, 식품관리 등과 같은 분야에 적용되고 있다. 부하 분산은 과부하 상태인 노드로부터 부하가 적은 노드로 작업 부하를 이동시켜 시스템의 확장성을 향상시키는 기본 기술이다. 시스템의 부하를 예측하기 어렵고 부하량의 편차가 큰 경우에는 적응적 부하 분산이 효과적인 것으로 알려져 있다. RFID 미들웨어는 많은 수의 리더로부터 수신된 태그 정보를 효율적으로 처리하기 위하여 기존의 부하 분산기술이 도입될 필요가 있다. RFID 시스템이 부하량을 예측하기 힘들고 편차가 큰 환경에 적용될 경우 실행시간에 시스템의 전체 부하량에 따라 적합한 정책으로 변경할 수 있는 적응적 부하 분산 기법을 사용하는 것이 바람직하다. 본 논문에서는 RFID 미들웨어에 적응적 부하 분산 기법을 도입하기 위한 접근 방법과 결과를 제시한다. 먼저 RFID 미들웨어의 작업 부하 모델을 결정한다. 그리고 부하 모델을 바탕으로 다양한 부하 분산 정책을 시스템의 부하 상태 별로 적용하여 시스템의 부하 상태에 적합한 부하 분산 정책을 선택한다.

• 한국농촌건축학회논문집
• /
• 제20권1호
• /
• pp.19-26
• /
• 2018

The roof improvement project is being carried out under the government's leadership for the sake of national welfare. The project is to replace the asbestos slate roof with a metallic one. In this study, the structural safety of the improved roof was examined and the project guidelines were reviewed. The causes of the roof damage were investigated and the structural analysis was performed for the roof frame subject to wind and snow loads. Metallic roof assemblies have higher strength and load resistance capability than usual slate ones, so the structural safety is governed by the frame. The stresses of the roof frame elements caused by the wind and snow loads were analyzed according to roof frame with various spacings between the rafters and the purlins. Wind load analysis was performed by 24, 28, and 38 m/sec of the basic wind speed. Snow load analysis was carried out by 0.5, 1.0 and $2.0kN/m^2$ of the ground snow load. As the analysis result, the current spacing and the size of the lumber did not satisfy the Korean building code specification. To secure the safety of the roof improvement project, the spacing of the roof frame elements and the size of the lumber should be determined based on the analysis results by structural engineers.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1743-1753
• /
• 2017

Since there are multiple random variables in the probabilistic load flow (PLF) calculation of distribution system containing distributed generation (DG) and electric vehicle charging load (EVCL), a Monte Carlo method based on composite sampling method is put forward according to the existing simple random sampling Monte Carlo simulation method (SRS-MCSM) to perform probabilistic assessment analysis of voltage quality of distribution system containing DG and EVCL. This method considers not only the randomness of wind speed and light intensity as well as the uncertainty of basic load and EVCL, but also other stochastic disturbances, such as the failure rate of the transmission line. According to the different characteristics of random factors, different sampling methods are applied. Simulation results on IEEE9 bus system and IEEE34 bus system demonstrates the validity, accuracy, rapidity and practicability of the proposed method. In contrast to the SRS-MCSM, the proposed method is of higher computational efficiency and better simulation accuracy. The variation of nodal voltages for distribution system before and after connecting DG and EVCL is compared and analyzed, especially the voltage fluctuation of the grid-connected point of DG and EVCL.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.977-994
• /
• 2015

In this study, earthquake loads are investigated statistically and compared with the nominal earthquake loads calculated according to the Turkish Earthquake Code, namely: "Specifications for Structures to be Built in Earthquake Areas". For this purpose, the "actual" mean load values estimated from statistical methods and the nominal load values computed according the Seismic Code are compared, with respect to some variations in the basic parameters, such as the importance factor, building height, site coefficient, seismic zone and seismic load reduction factor. In addition to the data compiled from different regions of Turkey, the published data and information in the foreign literature are also used in the determination of the earthquake load statistics. Although the dead and live loads acting on a structure are independent of the geographical location of the structure, environmental loads, such as earthquake loads are highly dependent on the location of the structure. Accordingly, for the assessment of statistical parameters associated with earthquake loads, twelve different locations which can represent the different seismic zones of Turkey as accurately as possible are chosen. As a result of the code calibration procedure considered in this study, it is observed that the load values obtained from the Turkish Seismic Code may overestimate or underestimate the actual seismic loads in some of the seismic zones.

• 대한기계학회논문집A
• /
• 제32권5호
• /
• pp.402-410
• /
• 2008

The heavy duty diesel engine must have a large output for maintaining excellent mobility. In this study, a three dimensional finite element model of a heavy-duty diesel engine was developed to conduct the stress analysis. The FE model of the heavy duty diesel engine main parts consisting with four half cylinder was selected. The heavy duty diesel engine parts includes with cylinder block, cylinder head, gasket, liner, bearing cap, bearing and bolts. The loading conditions of engine were pre-fit load, assembly load, and gas load. As the results of structural analysis, because the stress values of cylinder block and bearing cap did not exceed the basic design can be satisfied. But on the part which contacts with cylinder block and bearing cap the stress value exceeds the allowable strength of material. In order to decrease the stress at that part, it was optimized with parametric study.

• 한국태양에너지학회 논문집
• /
• 제29권3호
• /
• pp.66-72
• /
• 2009

As 'Low Carbon Green Building' is highly required, programs to evaluate building performance are actively and commonly used. For most of these programs, dynamic responses of buildings against external weather changes are very important. In order to simulate the programs, weather data of each region must be properly entered to estimate accurate amount of building energy consumption. To this end, the existing weather data and weather data of KSES were compared and analyzed to find out how weather changes. Energy load of Korea's standard houses was also analyzed based on this data. As a result, data corresponding to June ${\sim}$ September when cooling is supplied shows 23% of average increase with 30% of peak increase(June). On the other hand, data corresponding to November ${\sim}$ February when heating is supplied shows 29% of average decrease with 34% of peak decrease(November). Increase in cooling load and decrease in heating load in the above data comparison/analysis show that KSES 2009 data reflects increase in average temperature caused by global warming unlike the existing data. Increase in dry-bulb temperature depending on weather change of standard houses increases cooling load by 17% and decreases heating load by 36%

• 소성∙가공
• /
• 제13권8호
• /
• pp.689-695
• /
• 2004

This paper is concerned with the analysis of the forming load characteristics of a forward-backward can extrusion process. The analysis in this paper is extended to the selection of press frame capacity for producing efficiently final product at low cost. The possible extrusion processes to shape a forward-backward can part with different outer diameters are categorized to investigate quantitatively the forming load, forming energy and maximum pressure exerted on the die-material interface. The categorized processes are composed of combined and/or some basic extrusion processes. After the analysis of the forming load characteristics, the frame capacity of press suitable for a selected process could be determined along with securing the load capacity and with considering productivity. In addition, it is also suggested that different load capacities be selected for different dimensions of a part such as the wall thickness in forward direction. The work in this paper could be a good reference for analysis of complex extrusion and selection of proper frame capacity of press to achieve low production cost and thus high productivity.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.80-85
• /
• 2006

The peak demand of electricity in summer season mainly comes from the day time cooling loads. Ice thermal Storage System (ITSS) uses off-peak electricity at night time to make ice for the day time cooling. In order to maximize the use of cold storage in ITSS, the estimation of day time cooling load for the building is necessary. In this study, we present a method of cooling load estimation using 5 years of normalized outdoor temperature, relative humidity, and the building construction data. We applied the hourly-based estimation to a general hospital building with relatively less sudden heat exchange and the results are compared with the measured cooling load of the building. The results show that the cooling loads estimation depends on the indoor cooling design temperature of the building.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1117-1122
• /
• 2001

This study is to investigate application to the load packing or block with photocatalystic which has the characteristics absorption and removal for NOx, which is mainly generated from plant or car, which can be resolved by actions of light. Therefor a basic study was carried out to maximize the photocatalystic block for elimination of NOx.

• 전기의세계
• /
• 제32권11호
• /
• pp.664-669
• /
• 1983

대규모 system을 취급하는 공학분야에 있어서 Matrix의 demension이 커짐에 따라 전산부담을 줄이기 위한 소요기억용량 절감 및 계산시간의 단축이 주된 관심사 중의 하나가 되어 왔다. LP(Linear Programming)기법 역시 대규모 선형 system에 적용될 경우 Basic Matrix 에 대한 dimensionality 문제를 포함하고 있으며 이에 대한 효과적인 해결방법으로 Bartels-Golub Decomposition 방법이 연구되어 있다. 이 방법은 Chan과 Yip등이 LSGA(Load Shedding and Generator Rescheduling) 문제에의 적용을 시도한 바 있으며, 일반적인 선형최적화 문제뿐만 아니라, dimensionality가 큰 Matrix의 Inverse 계산을 요하는 문제에 널리 적용될 수 있으므로 그 개요를 소개하고자 한다.