• Journal of Animal Science and Technology
• /
• v.55 no.4
• /
• pp.303-314
• /
• 2013

Knowledge regarding lipid catabolism has been of great interest in the field of animal sciences. In the livestock industry, excess fat accretion in meat is costly to the producer and undesirable to the consumer. However, intramuscular fat (marbling) is desirable to enhance carcass and product quality. The manipulation of lipid content to meet the goals of animal production requires an understanding of the detailed mechanisms of lipid catabolism to help meticulously design nutritional, pharmacological, and physiological approaches to regulate fat accretion. The concept of a basic system of lipases and their co-regulators has been identified. The major lipases cleave triacylglycerol (TAG) stored in lipid droplets in a sequential manner. In adipose tissue, adipose triglyceride lipase (ATGL) performs the first and rate-limiting step of TAG breakdown through hydrolysis at the sn-1 position of TAG to release a non-esterified fatty acid (NEFA) and diacylglycerol (DAG). Subsequently, cleavage of DAG occurs via the rate-limiting enzyme hormone-sensitive lipase (HSL) for DAG catabolism, which is followed by monoglyceride lipase (MGL) for monoacylglycerol (MAG) hydrolysis. Recent identification of the co-activator (Comparative Gene Identification-58) and inhibitor [G(0)/G(1) Switch Gene 2] of ATGL have helped elucidate this important initial step of TAG breakdown, while also generating more questions. Additionally, the roles of these lipolysis-related enzymes in muscle, liver and skin tissue have also been found to be of great importance for the investigation of systemic lipolytic regulation.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.632-640
• /
• 2019

Desalination plant ships have been recently regarded as one of the probable solutions for drought seasons in many countries. Because desalination plants should be mounted on the desalination ships and special purpose storages such as salty waste water tanks are necessary, onboard and compartment arrangements would be distinguished from those of other conventional commercial ships. This paper introduces some basic design procedure including resistance/propulsion and seakeeping performances. The ship lines were improved step by step after modification of the ship lines and verification of resistance/propulsion performances using computational fluid dynamics (CFD). After finalization of the ship lines, the seakeeping performance was also evaluated to check motion behaviors and drive wave-induced loads such as the wave shear force and bending moment. It was proved that the predicted long-term vertical wave shear force and bending moment were significantly less than the rule-based ones, thus it is expected that the deliverables of this study will reduce the construction cost of desalination plant ships.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.1
• /
• pp.9-16
• /
• 2019

The decrease in population of school age is one of major influencing factor of transformative educational environment. After the nineteen eighties, the population of South Korea has increased step by step, but the population of school age has been decreasing rapidly by low birth rate. As a result, closed school by merger and abolition of small school occurred all over the country. The closed school needed effective function as center of local community. Consequently the purpose of this study is to provide basic data for effective policy making of closed school by comparative analysis of educational environment such as number of students, schools, students per class, status of usage of closed school of the east area and the west area divided by The Tae Baek Mountains in the Gangwon-do, which has the least students in the nationwide. The results of this study are summarized as follows: 1) Gangwon-do has high decreasing rate of population, schools and students compared with other provinces. However it has significantly low number of students per class. 2) The number of students, schools of the west area in Gangwon-do outnumbers that of the east area. However the number of students per class of the east area in Gangwon-do lesser than that of the west area.

• Journal of Fashion Business
• /
• v.16 no.3
• /
• pp.32-44
• /
• 2012

This study proposed a color scheme that is harmonious with the working environment of industrial sites using Birren's color harmony theory for color planning. To apply the Birren's color harmony theory to working clothes, the basic colors were chosen, and six of the eight harmony formulas of Birren excluding achromatic colors (white + grey + black) and solid color harmony (solid colors + white + black) were used to form a palette for each case. For the basic colors, the color chips of four dominant colors (yellow-green, sky-blue, blue, and violet), which were chosen from a field survey for preferences in the first step, and the production of materials in the second step were collected through the PANTONE color chips. The selected color chips were PANTONE 13-0550 TPX, PANTONE 15-4105 TPX, PANTONE 18-3949 TPX, and PANTONE 19-3720 TPX. These color chips were scanned and their RGB values were extracted through Photoshop CS. Then the colors were arranged in accordance with the Birren's color harmony formulas (Color+Tint+White, Color+Shade+Black, Tint+Tone+Shade, Shade+Tone+Black, Shade+Tone+White, and Tint+Shade+Tone+Gray). In addition, the proposed palette color schemes were applied through Birren's color harmony formulas using Texpro V 10.1 textile to the schematization of working clothes that were designed in the previous study. Palette formation in line with Birren's color harmony formulas provided scientific color arrangement results. Visually presenting the color scheme of working clothes will help the color selection of working clothes in tune with the circumstances of industrial sites.

• The Korea Journal of Herbology
• /
• v.26 no.1
• /
• pp.21-27
• /
• 2011

Objectives : This study aimed to design manual of guideline book for combined medicaion of the oriental and the western drugs in the disease of the aged. Method : First, we collected informations about guideline book for drug medication, and we investigated wishes of professors who are working for an oriental medicine at universities. Result & Conclusion : 1. The greater part of professors recognized necessity of guideline book for combined medicaion of the oriental and the western drugs. 2. The basic stages of framing guideline book for combined medicaion of the oriental and the western drugs are as follows. The first step is planning of framing guideline book for combined medicaion of the oriental and the western drugs. The second step is organization of framing group and advisory committee for guideline book. The next steps are searching the core of items and making a searching all the literature and estimating the literature. And then, we should complete basic contents of guideline book in a row, and those must be examined thoroughly by external experts. Finally we can make public the guideline book for combined medicaion of the oriental and the western drugs. If there are reform contents in the guideline book, we can amend contents and make public the revision guideline book again. 3. We need guideline information center for combined medicaion of the oriental and the western drugs in the disease of the aged for framing, wide-spread and development of guideline book. 4. We think that the guideline information center should be composed of a steering committee, a committee of controlling informations and advisory committee for guideline book.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.322-330
• /
• 2007

Because 6sigma is doing innovative success In management whole, estimate that can exert direct effect in interior Design management. Therefore, this study did by purpose that 6sigma that is scientific method that do customers satisfaction by ultimate purpose acts as basic study that can heighten practical use Possibility and result of interior Design management and value by interior design standardization process. Need to use marketing data that is scientific design component at schematic design step for successful interior design that can improve result. Hereupon, this study is doing to big dimension that utilizes 6sigma and makes standard process of only Interior Design, and did to dimension that present study phase verifies if '6sigma' is practical use possibility by intoner design process. Did by method that verification method of 6sigma practical use possibility analyzes "Information transmission efficiency improvement of department store display space" 6sigma project example. When see that example project is analyzed on Improvement constituent that "Design improvement" out of Vital few Xs of statistical analysis item must heighten the customers satisfaction rate conclusively, target process might be established because design becomes center of gravity if did design improvement very first time. Finally, possibility that 6sigma can utilize in process of interior design is verified, and it is scientific methodology that can utilize to all business members that there are not any special category of business even if is in practical use. Such scientific 6sigma method need persistent study that make standard process analyzing a lot of problems that is expected to be beaconed and happens substantially in here after to management development of interior design.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.287-294
• /
• 2016

The whole design process drawing outputs from design planning is based on designers' intuitive ideas and differences in technical ability. However, every design professional agrees to the fact that such design process is filled with individuals' implicit acts or inherent intuition rather than following directions in a certain defined frame. If the design process based on such intuition and experience can start from the rational and scientific process, it would be possible to move more systematic design process to the next step. This study aims to examine what system of thinking are used by designers to conduct the design information process, by using the protocol analysis which is the representative qualitative study method of cognitive science, on designers' cognitive behaviors like the contents of the design sketch process which is the initial step of the kitchenware development process, in order to understand professionals' and non-professionals' design application direction. Thus, the scope of this paper would be limited to "the initial protocol analysis on kitchenware" and "encoding of the analysis on thinking" in the qualitative study that can be the most basic to understand the design cognitive science. As a procedure to solve this study question, it aimed to seek for the product development flow and the educational effect by considering the preceding researches and also re-interpreting cognitive thinking in systematic methods.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.11-21
• /
• 2009

Recently, as custom-made demand about female underwear is increased, securing of a various dimension system is urgent, and satisfaction of each customer cannot be heightened with established dimensions. If we could measure shape of a living body with a fast and simple method, the custom-made demand of customers could be satisfied in the underwear as well as a clothing industry by using the method. One of the alternatives is shape measurement of the living body by a Moire fringe method. If we put a grating in front of an object to be measured and illuminate light, a Moire fringe with contour line shape is generated in the object, so we can conveniently measure object shape without touching directly by using the pattern. The Moire fringe and three-dimensional shape of the breast of the living body was acquired by a PMP method using a polygon mirror, and height and bottom width of the breast of the living body were measured by using obtained data in this study. Data of breast shape measurement through a mannequin was collected in a previous step as basic material for measuring the breast shape measurement of the living body. Three women in the twenties were selected as one of methods for measuring breast shape of a woman. As a result of the breast shape measurement of a living body A, it was measured that height of the breast was about 67.24mm and the bottom width was $13781.60mm^2$. This study is expected to contribute for collecting basic data of a female underwear industry and establishing a specification of a dimension system.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.87-90
• /
• 2001

This paper presents a design of new type biped robot and dynamic walking simulation for this system. The robot is distinguished from other one by which has a parallel mechanism type trunk and lead-screw type actuators to drive the joints of the trunk, knee and ankle. The basic consideration on the design is that it is able to accommodate itself to human's daily environments without any other modification of around and also to operate its upper limbs more smoothly with a spine functional trunk. It is designed according to a human with about 130 cm height and about 30 kg weight. And it also is able to dynamically walk on an even ground. It has constructed with total 14 DOFs which have two legs, a hip, and a trunk. The joints of each leg and trunk are adopted with a parallel structure which has good kinematic characteristics and take light weight. To test of the capacity of joint actuators and to analysis of the dynamic properties of the biped robot, optimized trunk trajectory is determined by means of an approximated FFT method based on ZMP criteria, and dynamic simulation is performed using DADS with a 1.1 time/step velocity on the even ground during four steps.

• Journal of Internet Computing and Services
• /
• v.19 no.2
• /
• pp.43-48
• /
• 2018

Various artifacts that are produced as software R&D project progresses contain research plan, research report, software requirements and design descriptions, etc. When conducting a software R&D project, it is necessary to confirm that the developed system has implemented its research requirements well. However, various research results make it difficult to design appropriate tests. So, there is a practical need for us to comprehensively handle the planning, execution, and reporting of software test for finding and verifying information related to the research. In this paper, we propose a useful method for software test process in R&D project which supports model based software testing. The proposed method supports automation of test design and generation of test data by explicitly separating each step of System Under Test (SUT). The method utilizes the various models representing the control flow of the function to extract the information necessary for testing the system. And it supports a systematic testing process based on TMMi and ISO 29119. Finally, we show the validity of the method by implementing a prototype with basic functionality to generate test data from software behavioral models.