• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.6
• /
• pp.527-538
• /
• 2010

This paper presents a nondestructive evaluation approach for system identification (SID) of real railway bridges using field vibration test results. First, a multi-phase SID scheme designed on the basis of eigenvalue sensitivity concept is presented. Next, the proposed multi-phase approach is evaluated from field vibration tests on a real railway bridge (Wondongcheon bridge) located in Yangsan, Korea. On the steel girder bridge, a few natural frequencies and mode shapes are experimentally measured under the ambient vibration condition. The corresponding modal parameters are numerically calculated from a three-dimensional finite element (FE) model established for the target bridge. Eigenvalue sensitivities are analyzed for potential model-updating parameters of the FE model. Then, structural subsystems are identified phase-by-phase using the proposed model-updating procedure. Based on model-updating results, a baseline model and a nondestructive evaluation of test bridge are identified.

• ALGAE
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2012

Algae are sensitive to a wide range of pollutants, and are effective bioindicators in ecotoxicity assessments. Here, we evaluated the sub-lethal sensitivity of the marine dinoflagellate Cochlodinium polykrikoides upon exposure to copper (Cu), lead (Pb), bisphenol A (BPA), and Aroclor 1016 (polychlorinated biphenyl, PCB). Toxic effects were assessed by observations of the reduction in cell counts and chlorophyll a levels after exposure to each toxicant. C. polykrikoides displayed dose-dependent, sigmoidal responses when exposed to the tested chemicals. $EC_{50}$-72 h values for Cu, Pb, BPA, and PCB were 12.74, 46.70, 68.15, and $1.07mg\;L^{-1}$, respectively. PCB, which is an endocrine-disrupting chemical, was the most sensitive, proving its toxic effect on the dinoflagellate. This study provides baseline data on the toxic effects of commonly used heavy metals and endocrine-disrupting chemicals to a marine dinoflagellate.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.30-38
• /
• 2013

This paper describes the design optimization of Unmanned Aerial Vehicles(UAVs). An optimization framework has been developed and implemented for the conceptual design of UAVs. An integrated design analysis program was developed with several analysis modules such as propulsion, performance, mission, weight, and stability and control. A UAV configuration design optimization was performed by implementing the integrated analysis to enhance the endurance of UAVs. A SQP optimizer was utilized to build an optimization module for this program and sensitivity analysis was performed to determine the trends of shape variables for developing optimization objective. In conclusion, the results indicate that the resulting optimized UAVs configurations show performance improvements over the baseline design and reliable analysis results.

• Journal of the military operations research society of Korea
• /
• v.28 no.1
• /
• pp.29-46
• /
• 2002

This study focuses primarily on the construction of the wartime sealift operation model from US to Korea. There are some uncertainties in the process of sealift operation such as the procurement rate of materiel in US, the distribution of KFS on four initial position locations at the start of the activation, and the number of ports and berths in the SPOES and SPODS. The sealift capability, based on the allocation of sealift assets such as the number of vessels, berths, and ports, is evaluated through simulation. The simulation is executed with a baseline wartime scenario and then the results are analyzed through a sensitivity analysis. The military planner may use of this model as a standard for establishing effective and concrete sealift operation plan in the near future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.5
• /
• pp.2414-2433
• /
• 2019

The aim of this paper is to design a 3D laser radar prototype based on laser triangulation. The mathematical model of distance sensitivity is deduced; a pixel-distance conversion formula is discussed and used to complete 3D scanning. The center position extraction algorithm of the spot is proposed, and the error of the linear laser, camera distortion and installation are corrected by using the proposed weighted average algorithm. Finally, the three-dimensional analytic computational algorithm is given to transform the measured distance into point cloud data. The experimental results show that this 3D laser radar can accomplish the 3D object scanning and the environment 3D reconstruction task. In addition, the experiment result proves that the product of the camera focal length and the baseline length is the key factor to influence measurement accuracy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.75-84
• /
• 2017

It becomes more and more more important for the storage that supports high speed recording and stable access from network environment. As one field of basic science which produces massive astronomical data, VLBI(: Very Long Baseline Interferometer) is now demanding more data writing performance and which is directly related to astronomical observation with high resolution and sensitivity. But most of existing storage are cloud model based for the high throughput of general IT, finance, and administrative service, and therefore it not the best choice for recording of big stream data. Therefore, in this study, we design storage system optimized for high performance of I/O and concurrency. To solve this problem, we implement packet read and writing module through the use of libpcap and pf_ring API on the multi core CPU environment, and build a scalable storage based on software RAID(: Redundant Array of Inexpensive Disks) for the efficient process of incoming data from external network.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.159-163
• /
• 2006

Background: Despite the enormous amount of basic research on neuropathic pain, there is the lack of an objective diagnostic test for complex regional pain syndrome (CRPS). The aim of this study was to evaluate the usefulness of cold stress thermography in the diagnosis of CRPS. Methods: The study involved 12 patients with CRPS type 1, according to the IASP criteria, who were compared with 15 normal healthy volunteers. All subjects underwent thermographic examination under baseline conditions at $21^{\circ}C$. A cold stress test (CST; $10^{\circ}C$ water for 1 minute) was then applied to both hands below the wrists, immediate, and after 10 and 20 minutes. Results: The temperature asymmetry between the patients with CRPS and the volunteers showed significant discrimination at the baseline and after a 20 minute recovery period from the CST. Among the study subjects having temperature asymmetry of both hands of less than $1^{\circ}C$ (8 out of 12 CRPS patients and 14 out of 15 volunteer), 7 (87.5%) of the 8 CRPS patients and 3 (21%) of the 14 volunteers showed a temperature difference of more than $1^{\circ}C$ after the 20 minute recovery period. The actual temperature values during the four periods did not discriminate between the patients with CRPS and the volunteers. Conclusions: Thermography, under the CST, could be a more objective test for the diagnosis of CRPS. A temperature asymmetry greater than $1^{\circ}C$ during the 20 minute recovery period following CST provides strong diagnostic information about CRPS, with both high sensitivity and specificity.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.257-264
• /
• 2020

Objective: To investigate test-retest reliability and responsiveness of Equivital Lifemonitor and photoplethysmography based wristwatch tools in assessing physiological parameters during a simulated fatigue task. Methods: Ten university students (Mean age, 30.6 ± 1.7 years) participated in this pilot study. Participants were asked to perform a 30-minute of a simulated fatigue task in an experimental setup in a lab. The physiological parameters (e.g., heart rate, heart rate variability, respiratory rate, electrodermal activity, and skin temperature) were measured at baseline and immediately after the fatigue task. An intraclass correlation coefficient (ICC2,1) was used to evaluate the test-retest reliability of each tool in assessing physiological measures. In addition, the responsiveness of each tool to measure changes from baseline to posttest was calculated using a standardized response mean. Results: The Equivital Lifemonitor has shown good to excellent test-retest reliability for the assessment of heart rate (ICC, 0.97), heart rate variability (ICC, 0.86), respiratory rate (ICC, 0.77), and local skin temperature (ICC, 0.76). However, photoplethysmography based wristwatch showed moderate to good test-retest reliability for the assessment of heart rate (ICC, 0.71), heart rate variability (ICC, 0.73), electrodermal activity (ICC, 0.80), and skin temperature (ICC, 0.72). A large standardized response mean (>0.8) indicates that both tools can capture the changes in heart rate, heart rate variability, respiratory rate, skin temperature, and electrodermal activity after a 30-minute of fatigue task. Conclusions: The Equivital Lifemonitor and photoplethysmography based wristwatch devices are reliable in measuring physiological parameters after the fatigue task. Additionally, both devices can capture the fatigue response after a simulated construction task. Future field studies with a larger sample should investigate the sensitivity and validity of these tools in measuring physiological parameters for fatigue assessment at construction sites.

• Korean Journal of Biological Psychiatry
• /
• v.3 no.2
• /
• pp.222-239
• /
• 1996

The purpose of this study was to evaluate the effects of alcohol on the psychomotor performance and subjective assessment in healthy Korean adults with acetaldehyde dehydrogenase I(ALDH-I) isozyme variance. A total of 20 male subjects, half with active ALDH-I and the other half with inactive ALDH-I, were selected through both a self-reporting questionnaire examining alcohol sensitivity and the Higuchi's ethanol patch test detecting ALDH-I deficiency. In a doule-blind, placebo-controlled cross-over design, each subject consumed four doses of alcohol(0.25, 0.5, 0.75, 1.0g/kg) and placebo on five separate occasions at weekly intervals, Treatment order was fully balanced using a $5{\times}5$ Latin square, Psychomotor performance tests[coritical flicker fusion threshold(CFF) and choice reaction time(CRT)] and self-estimate questionnaires were conducted at baseline and at time points of 20, 40, 60, 90, 120, 150, 180 minutes after consuming the test drug for 20 minutes, Blood alcohol concentrations(BACs) using breath analyzer were measured at baseline and at time points of 10, 20, 30, 40, 50, 60, 75, 90, 105, 120, 150, 180 minutes after drinking, The BACs and the mean changes in the psychomotor performances and subjective assessments from pre-alcohol baseline, were compared between the two groups. The findings were summarized as follows : 1) BACs were tended to be higher in the inactive group than the active in all of the four alcohol doses. However significant group differences were only after the 0.5g/kg dose of alcohol. 2) The inactive group showed significant impairment in CFFT at most time points alter 0.75 and 1.0g/kg doses of alcohol. 3) In CRT, total reaction time(TRT) significantly prolonged in the inactive group than the active group at 20 minutes after 0.25 and 1.0g/kg doses of alcohol and at 40, 60, 90 minutes alter 0.75g/kg dose of alcohol. In the inactive group, recognition time component significantly increased at 20, 60, 90 minutes after 1.0g/kg dose of alcohol, while movement time component significantly increased at 40, 60 minutes after 0.75g/kg dose of alcohol. 4) Subjective evaluation of the effect of alcohol revealed that physical and mental conditions as well as a self-estimate of the effects of alcohol on performance were significantly worse in the inactive group than the active at some time points alter all of the lour alcohol doses, wihch were more pronounced after 0.75 and 1.0g/kg doses of alcohol. 5) Most of the group differences mentioned above, still remained statistically significant after BAC was entered as a covariate, These findings demonstrated that the alcohol sensitivity is higher in individuals with inactive ALDH-I than those with active ALDH-I both on the subjective assessments and the objective psychomotor performances. Furthermore, these results suggest thai the alcohol sensitivity may be determined by acetaldehyde concentration rather than BAC per se. In future studies, after more accurate genotyping for ALDH-I, the relationships between BAC, acetaldehyde concentration and alcohol sensitivities should be clearly defined.

• Korean Journal of Radiology
• /
• v.21 no.7
• /
• pp.859-868
• /
• 2020

Objective: To investigate the value of initial CT quantitative analysis of ground-glass opacity (GGO), consolidation, and total lesion volume and its relationship with clinical features for assessing the severity of coronavirus disease 2019 (COVID-19). Materials and Methods: A total of 84 patients with COVID-19 were retrospectively reviewed from January 23, 2020 to February 19, 2020. Patients were divided into two groups: severe group (n = 23) and non-severe group (n = 61). Clinical symptoms, laboratory data, and CT findings on admission were analyzed. CT quantitative parameters, including GGO, consolidation, total lesion score, percentage GGO, and percentage consolidation (both relative to total lesion volume) were calculated. Relationships between the CT findings and laboratory data were estimated. Finally, a discrimination model was established to assess the severity of COVID-19. Results: Patients in the severe group had higher baseline neutrophil percentage, increased high-sensitivity C-reactive protein (hs-CRP) and procalcitonin levels, and lower baseline lymphocyte count and lymphocyte percentage (p < 0.001). The severe group also had higher GGO score (p < 0.001), consolidation score (p < 0.001), total lesion score (p < 0.001), and percentage consolidation (p = 0.002), but had a lower percentage GGO (p = 0.008). These CT quantitative parameters were significantly correlated with laboratory inflammatory marker levels, including neutrophil percentage, lymphocyte count, lymphocyte percentage, hs-CRP level, and procalcitonin level (p < 0.05). The total lesion score demonstrated the best performance when the data cut-off was 8.2%. Furthermore, the area under the curve, sensitivity, and specificity were 93.8% (confidence interval [CI]: 86.8-100%), 91.3% (CI: 69.6-100%), and 91.8% (CI: 23.0-98.4%), respectively. Conclusion: CT quantitative parameters showed strong correlations with laboratory inflammatory markers, suggesting that CT quantitative analysis might be an effective and important method for assessing the severity of COVID-19, and may provide additional guidance for planning clinical treatment strategies.