• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.6
• /
• pp.83-96
• /
• 2018

The objective of this study was to estimate the climate change impact on water quantity and quality to Saemanguem watershed using SWAT (Soil and water assessment tool) model. The SWAT model was calibrated and validated using observed data from 2008 to 2017 for the study watershed. The $R^2$ (Determination coefficient), RMSE (Root mean square error), and NSE (Nash-sutcliffe efficiency coefficient) were used to evaluate the model performance. RCP scenario data were produced from 10 GCM (General circulation model) and all relevant grid data including the major observation points (Gusan, Jeonju, Buan, Jeongeup) were extracted. The systematic error evaluation of the GCM model outputs was performed as well. They showed various variations based on analysis of future climate change effects. In future periods, the MIROC5 model showed the maximum values and the CMCC-CM model presented the minimum values in the climate data. Increasing rainfall amount was from 180mm to 250mm and increasing temperature value ranged from 1.7 to $5.9^{\circ}C$, respectively, compared with the baseline (2006~2017) in 10 GCM model outputs. The future 2030s and 2070s runoff showed increasing rate of 16~29% under future climate data. The future rate of change for T-N (Total nitrogen) and T-P (Total phosphorus) loads presented from -26 to +0.13% and from +5 to 47%, respectively. The hydrologic cycle and water quality from the Saemanguem headwater were very sensitive to projected climate change scenarios so that GCM model should be carefully selected for the purpose of use and the tendency analysis of GCM model are needed if necessary.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.5
• /
• pp.787-796
• /
• 2009

A random coefficient model is applied when times of the repeated measurements are not fixed in experiments with respect to the subjects. The procedures of the inference of a random coefficient model are same as those of a mixed model. Diet experimental data was used for applying the random coefficient model. Various random coefficient models are investigated for the experimental data, and are compared each other. Finally, optimal random coefficient model would be selected. It resulted from the analysis that for the fixed effect factor, the baseline, treatment, height, and time effect were very significant. The treatment effect of the diet foods and exercises were more effective in losing weight than the effect of the diet foods only. The fixed cubic time effect was very significant. The variance components corresponding to the subject effect, linear time effect, quadratic time effect, and cubic time effect of the random coefficients are all positive. When quartic time effect was added as random coefficients the model did not converge. Thus random coefficients up to the cubic terms was considered as the optimal model.

• Structural Engineering and Mechanics
• /
• v.35 no.1
• /
• pp.37-52
• /
• 2010

Special-shape arch bridge for self-balance (SBSSAB) in Zhongshan City is a kind of new fashioned spatial combined arch bridge composed of inclined steel arch ribs, curved steel box girder and inclined suspenders, and the mechanical behavior of the SBSSAB is particularly complicated. The SBSSAB is aesthetic in appearance, and design of the SBSSAB is artful and particular. In order to roundly investigate the mechanical behavior of the SBSSAB, 3-D finite element models for spatial member and shell were established to analyze the mechanical properties of the SBSSAB using ANSYS. Finite element analyses were conducted under several main loading cases, moreover deformation and strain values for control section of the SBSSAB under several main loading cases were proposed. To ensure the safety and rationality for optimal design of the SBSSAB and also to verify the reliability of its design and calculation theories, the 1/10 scale model tests were carried out. The measured results include the load checking calculation, lane loading and crowd load, and dead load. A good agreement is achieved between the experimental and analytical results. Both experimental and analytical results have shown that the SBSSAB is in the elastic state under the planned test loads, which indicates that the SBSSAB has an adequate load-capacity. The calibrated finite-element model that reflects the as-built conditions can be used as a baseline for health monitoring and future maintenance of the SBSSAB.

• Korean Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.141-150
• /
• 2008

The purpose of this study was to assess the causal relationships among hedonic belief, ambivalence, subjective norm, attitude and meat consumption behavior. A total of 318 questionnaires were completed. Structural equation model was used to measure the causal effects of constructs. Results of the study demonstrated that fit of the restricted baseline model is significantly worse than that of the unrestricted proposed model, in which more parameters are estimated. The effects of hedonic belief, ambivalence and subjective norm on attitude were statistically significant. The effects of hedonic belief, subjective norm and attitude on meat consumption were statistically significant. The effect of attitude on intention was statistically significant. Moreover, attitude played a mediating role in the relationships between hedonic belief and meat consumption, between ambivalence and meat consumption, and between subjective norm and intention. This study suggested that the consumer decision-making process for eating meat products is best modeled as a complex system that incorporates both direct and indirect effects on meat consumption. This study believed the evidence presented supports this position. Moreover, this study appeared to be a worthy area of pursuit.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.5120-5142
• /
• 2018

Social media enables customers to share their views, opinions and experiences as product reviews. These product reviews facilitate customers in buying quality products. Due to the significance of online reviews, fake reviews, commonly known as spam reviews are generated to mislead the potential customers in decision-making. To cater this issue, review spam detection has become an active research area. Existing studies carried out for review spam detection have exploited feature engineering approach; however limited number of features are considered. This paper proposes a Feature-Centric Model for Review Spam Detection (FMRSD) to detect spam reviews. The proposed model examines a wide range of feature sets including ratings, sentiments, content, and users. The experimentation reveals that the proposed technique outperforms the baseline and provides better results.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.63-71
• /
• 2005

e-VLBI was invented to enhance the efficiency of VLBI (Very-Long-Baseline Interferometry) system by transmitting the data via high speed network. Korean VLBI Network (KVN) has a plan to construct e-VLBI system named e-KVN. High speed backbone network and efficient network model are essential to implement successful e-VLBI system. This paper introduces a network model based on PC cluster technology. The present status of high speed backbone network in Korea is overviewed. We suggest that the network link via Korea Advanced Research Network (KOREN) is one of feasible way for e-KVN. We also describe the principles of e-VLBI and protocol for network transmission such as VSI-E (VLBI Standard Interface - Electronic), RTP (Real-Time Transport Protocol) and RTCP (Real-Time Transport Control protocol).

• International Commerce and Information Review
• /
• v.12 no.4
• /
• pp.171-192
• /
• 2010

In general, a stock index and its individual stocks are assumed to follow a random walk. A stock index is an important source of information and one that is seen by people everyday, regardless of their investment intentions. This paper examines the correlation between the KOSPI-the index that best reflects the Korean stock market and the macro - economic variables that have been found to influence the index by previous studies. The sample period considers the years after 2000 when the Korean stock market matured as restrictions on foreign investors were removed. For this purpose, a Vector Error Correction Model (VECM) and KOSPI equation with a general pacific approach were used. This paper aims at verifying the factors that determined the KOSPI after 2000 and at examining whether there was structural change in the investment environment. It also investigates changes in the factors determining the KOSPI's performance as a result of structural changes in the investment environment. The V AR (Vector Autoregressive) model including the nine variables was selected as a baseline model whose stability was tested using the unit root test. The results from the VECM and the structural changes in the investment environment can be summarized by the following Inner story points.

• Journal of Korean Academy of Nursing
• /
• v.15 no.2
• /
• pp.5-15
• /
• 1985

This study was conducted for the purpose of fin-ding out the variance explaining the medical facilities utilization behavior, which is defined adaptation behavior Process by focal, contextual, residual stimuli in Roy's Adaptation Model. What kinds of characteristics can explain adaptation behavior in Roy's Model? And which is the relative importance of input variables? For this analysis, stepwise multiple regression and path analysis was used. The data come from the 1981 Baseline Household Interview Survey in remote rural area. The findings of the analysis can be summarized as follows: First, Total variance of independant variables for adaptation behavior, that is medical facilities utilization including clinic, drug store, health center, herb medicine was shown 16.2 percent. The most important variable which explain the dependent variable was the occurance of illness with the Ra of value 0.112. The illness symptom, living level, regular care source was shown important variables with relatively high the R²value and significant beta coefficient. Second, in the path analysis of variables which is selected important variables, the occurance of illness was shown variable which has the highest direct effect which 0.297 path coefficient. Also the education level of household was shown variable which has the highest indirect effect through living level and the occurance of illness in causal model. Third, This analysis suggests that the occurance of illness belonging focal stimuli are more influenced than others. To sum up, It is seem to the occurance of illness, illness symptom belonging focal stimuli have high explanation ability through direct effect, education level of household among contextual stimuli have explanation ability through indirect effect.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.51-60
• /
• 2020

Optical character recognition (OCR) has been studied for decades because it is very useful in a variety of places. Nowadays, OCR's performance has improved significantly due to outstanding deep learning technology. Thus, there is an increasing demand for commercial-grade but affordable OCR systems. We have developed a low-cost, high-performance OCR system for the industry with the cheapest embedded developer kit that supports GPU acceleration. To achieve high accuracy for industrial use on limited computing resources, we chose a state-of-the-art text recognition algorithm that uses an end-to-end deep learning network as a baseline model. The model was then improved by replacing the feature extraction network with the best one suited to our conditions. Among the various candidate networks, EfficientNet-B3 has shown the best performance: excellent recognition accuracy with relatively low memory consumption. Besides, we have optimized the model written in TensorFlow's Python API using TensorFlow-TensorRT integration and TensorFlow's C++ API, respectively.