• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1143-1152
• /
• 2012

We established a top-down methodology to estimate carbon footprint as national mean value (reference) with the statistical data on agri-livestock incomes in 2007. We also established LCI (life cycle inventory) DB by a bottom-up methodology with the data obtained from interview with farmers from 4 large-scale farms at Gunsan, Jeollabuk-do province to estimate carbon footprint in 2011. This study was carried out to compare top-down methodology and bottom-up methodology in performing LCA (life cycle assessment) to analyze the difference in GHGs (greenhouse gases) emission and carbon footprint under conventional rice cultivation system. Results of LCI analysis showed that most of $CO_2$ was emitted during fertilizer production and rice cultivation, whereas $CH_4$ and $N_2O$ were mostly emitted during rice cultivation. The carbon footprints on conventional rice production system were 2.39E+00 kg $CO_2$-eq. $kg^{-1}$ by top-down methodology, whereas 1.04E+00 kg $CO_2$-eq. $kg^{-1}$ by bottom-up methodology. The amount of agro-materials input during the entire rice cultivation for the two methodologies was similar. The amount of agro-materials input for the bottom-up methodology was sometimes greater than that for top-down methodology. While carbon footprint by the bottom-up methodology was smaller than that by the top-down methodology due to higher yield per cropping season by the bottom-up methodology. Under the conventional rice production system, fertilizer production showed the highest contribution to the environmental impacts on most categories except GWP (global warming potential) category. Rice cultivation was the highest contribution to the environmental impacts on GWP category under the conventional rice production system. The main factors of carbon footprints under the conventional rice production system were $CH_4$ emission from rice paddy field, the amount of fertilizer input and rice yield. Results of this study will be used for establishing baseline data for estimating carbon footprint from 'low carbon certification pilot project' as well as for developing farming methods of reducing $CO_2$ emission from rice paddy fields.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.8
• /
• pp.1-10
• /
• 2012

This paper proposes design space exploration methodology of many-core processors including multimedia specific instructions to support high-performance and low power ultrasound imaging for portable devices. To explore the impact of multimedia instructions, we compare programs using multimedia instructions and baseline programs with a same many-core processor in terms of execution time, energy efficiency, and area efficiency. Experimental results using a $256{\times}256$ ultrasound image indicate that programs using multimedia instructions achieve 3.16 times of execution time, 8.13 times of energy efficiency, and 3.16 times of area efficiency over the baseline programs, respectively. Likewise, programs using multimedia instructions outperform the baseline programs using a $240{\times}320$ image (2.16 times of execution time, 4.04 times of energy efficiency, 2.16 times of area efficiency) as well as using a $240{\times}400$ image (2.25 times of execution time, 4.34 times of energy efficiency, 2.25 times of area efficiency). In addition, we explore optimal PE architecture of many-core processors including multimedia instructions by varying the number of PEs and memory size.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.135-143
• /
• 2009

Integrating the Global Positioning System (GPS) and Inertial Navigation System (INS) sensor technologies using the precise GPS Carrier phase measurements is a methodology that has been widely applied in those application fields requiring accurate and reliable positioning and attitude determination; ranging from 'kinematic geodesy', to mobile mapping and imaging, to precise navigation. However, such integrated system may not fulfil the demanding performance requirements when the baseline length between reference and mobil user GPS receiver is grater than a few tens of kilometers. This is because their positioning/attitude determination is still very dependent on the errors of the GPS observations, so-called "baseline dependent errors". This limitation can be remedied by the integration of GPS and INS sensors, using multiple reference stations. Hence, in order to derive the GPS distance dependent errors, this research proposes measurement processing algorithms for multiple reference stations, such as a reference station ambiguity resolution procedure using linear combination techniques, a error estimation based on Kalman filter and a error interpolation. In addition, all the algorithms are evaluated by processing real observations and results are summarized in this paper.

• Journal of Acupuncture Research
• /
• v.28 no.5
• /
• pp.87-96
• /
• 2011

Objectives : The aim of this study is to review clinical trials using moxibustion on hypertension and to assess their methodology and results. Methods : Electronic literature searches for clinical trials (randomized trial, non-randomized trial, before-after study) of moxibustion were performed in nine electronic databases (four international databases and five Korean databases) and handsearch. English, Korean or Chinese articles were included. Laboratory or animal studies were excluded. Results : A total of twelve studies met the inclusion criteria. Seven randomized controlled trial, three non-randomized trials and two before-after studies were included. Seven studies used direct moxibustion(two are scarring one) and five used indirect one. Five of twelve studies used moxibustion treatment just one time, except for that most frequency was once daily or 2-3 times per week for 1-2 months. Of ten randomized or non-randomized studies, three used antihypertension drug control and another three used waiting list control. Compare to baseline, change of blood pressure after moxibustion treatment was significant in all studies. However, the results of effect in blood pressure between moxibustion and controlled were not consistent. Methodological quality of clinical trials included in this review was low and has risk of bias, especially in blinding of parcitipant. Conclusions : There are little high-quality clinical trials of moxibustion for hypertension. To evaluate the effect of moxibustion, more rigorous trials are warranted. Also, methodology of clinical trials have to be descripted in detail.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.87-96
• /
• 2007

In this paper a methodology of identifying individual pipes according to the internal and external characteristics of pipe is developed, and the methodology is applied to a case study water distribution pipe break database. Using the newly defined individual pipes the hazard rates of the cast iron 6 inch pipes are modeled by implementing the proportional hazards modeling approach for consecutive pipe failures. The covariates to be considered in the modeling procedures are selected by considering the general availability of the data and the practical applicability of the modeling results. The individual cast iron 6 inch pipes are categorized into seven ordered survival time groups according to the total number of breaks recorded in a pipe to construct distinct proportional hazard model (PHM) for each survival time group (STG). The modeling results show that all of the PHMs have the hazard rate forms of the Weibull distribution. In addition, the estimated baseline survivor functions show that the survival probabilities of the STGs generally decrease as the number of break increases. It is found that STG I has an increasing hazard rate whereas the other STGs have decreasing hazard rates. Regarding the first failure the hazard ratio of spun-rigid and spun-flex cast iron pipes to pit cast iron pipes is estimated as 1.8 and 6.3, respectively. For the second or more failures the relative effects of pipe material/joint type on failure were not conclusive. The degree of land development affected pipe failure for STGs I, II, and V, and the average hazard ratio was estimated as 1.8. The effects of length on failure decreased as more breaks occur and the population in a GRID affected the hazard rate of the first pipe failure.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.2018-2025
• /
• 2019

This study systematically compared two hybrid deterministic/Monte Carlo transport codes, ADVANTG/MCNP and MAVRIC, in solving a difficult shielding problem for a real-world spent fuel storage cask. Both hybrid codes were developed based on the consistent adjoint driven importance sampling (CADIS) methodology but with different implementations. The dose rate distributions on the cask surface were of primary interest and their predicted results were compared with each other and with a straightforward MCNP calculation as a baseline case. Forward-Weighted CADIS was applied for optimization toward uniform statistical uncertainties for all tallies on the cask surface. Both ADVANTG/MCNP and MAVRIC achieved substantial improvements in overall computational efficiencies, especially for gamma-ray transport. Compared with the continuous-energy ADVANTG/MCNP calculations, the coarse-group MAVRIC calculations underestimated the neutron dose rates on the cask's side surface by an approximate factor of two and slightly overestimated the dose rates on the cask's top and side surfaces for fuel gamma and hardware gamma sources because of the impact of multigroup approximation. The fine-group MAVRIC calculations improved to a certain extent and the addition of continuous-energy treatment to the Monte Carlo code in the latest MAVRIC sequence greatly reduced these discrepancies. For the two continuous-energy calculations of ADVANTG/MCNP and MAVRIC, a remaining difference of approximately 30% between the neutron dose rates on the cask's side surface resulted from inconsistent use of thermal scattering treatment of hydrogen in concrete.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.271-277
• /
• 2018

Generating an epipolar image which is removed a y-parallax from an original image is an essential technique for creating a 3D stereoscopic model or producing a map. In epipolar image production, there is a method of generating epipolar images by estimating the relative orientation parameters after matching the extracted distinct points in two images and a method of generating epipolar images by using the baseline and rotation angles of the two images after determining the exterior orientation parameters In this study, it was proposed a methodology to generate epipolar images using direction cosine in the exterior orientation parameters of the input images, and a method to use the transformation matrix for easy calculation when converting from the original image to the epipolar image. The applicability of the proposed methodology was evaluated by using images taken from the fixed wing and rotary wing drones. As a result, it was found that epipolar images were generated regardless of the type of drones.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1330-1333
• /
• 2004

The methodology for modeling building energy consumption is well established for energy saving calculation in the temperate zone both for performance-based energy retrofitting contracts and measurement and verification (M&V) projects. Mostly, statistical regression models based on utility bills and outdoor dry-bulb temperature have been applied to baseline monthly and annual whole building energy use. This paper presents the application of neural networks (NN) to model landlord energy consumption of commercial buildings in Singapore. Firstly, a brief background information on NN and its application on the building energy research is provided. Secondly, five commercial buildings with various characteristics were selected for case studies. Monthly mean outdoor dry-bulb temperature ($T_0$), Relative Humidity (RH) and Global Solar Radiation (GSR) are used as network inputs and the landlord monthly energy consumption of the same period is the output. Up to three years monthly data are taken as training data. A forecast has been made for another year for all the five buildings. The performance of the NN analysis was evaluated using coefficient of variance (CV). The results show that NNs is powerful at predicting annual landlord energy consumption with high accuracy.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.137-147
• /
• 2017

Wartime warship damage rate indicates how much damage of friend warships shall have occurred during naval battles accomplished under specific war operational plans. The wartime damage rate analysis provides the baseline of wartime resources requirements. If wartime damage rate is overestimated, the national finance will get to negative effects because of exceeding the budget for inventory, operation, and maintenance of resources. Otherwise, if wartime damage rate is underestimated, the national defense will lose in the war because of lack of critical resources. In this respect, it is important to estimate the wartime damage rate accurately and reasonably. This paper proposes a systematic procedure to estimate the wartime warship damage rate. The procedure consists of five steps; force analysis, operation plan analysis, input variable definition, simulation modeling, and output analysis. Since the combat simulation model is regarded as the main tool to estimate damage rate, the procedure is focused on the development of model and experiments using the model. A case study with virtual data is performed to demonstrate the effectiveness of the developed procedure.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.104-113
• /
• 2007

교토의정서(Kyoto Protocol)의 발효로 전 세계적으로 에너지절약형 산업구조로의 전환 및 신재생에너지 개발 등의 온실가스 감축을 위한 노력이 활발하게 진행되고 있으며, 우리나라 또한 온실가스 저감을 피할 수 없게 되었다. 특히 선진국(Annex I)의 구속력 있는 감축목표를 규정하고 있는 교토의정서의 의무이행에 유연성을 부가하기 위해 교토메카니즘이 채택되었다. 교토 메카니즘은 CDM(Clean Development Mechanism), JI(Joint Implementation), ET(Emission Trading)로 이루어져 있으며, 이 가운데 CDM 사업은 선진국(Annex I)과 개발도상국 non-Annex I)간 공동 협력 사업으로 non-Annex I 국가인 우리나라가 참여할 수 있기 때문에 국내 기업 및 정부의 관심이 높아지고 있다. 이러한 CDM 사업을 수행하기 위해서는 적용 가능한 CDM 사업 방법론이 필요하며, 방법론이 없을 경우 CDM 사업 방법론을 개발하여야 한다. CDM사업 방법론에는 레이스라인, 추가성, 배출 감축량, 모니터링 등에 대한 구체적인 방법이 제시되어야 하고 사업 수행자는 사업의 타당성 확인 및 검증을 위해 방법론을 정확히 이해해야 한다. 따라서 본 CDM사업 방법론 연구를 통해 CDM사업 수행 및 방법론 개발을 위한 주요 항목의 이해를 돕고 국내 CDM 사업의 활성화를 도모하고자 한다.