• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.231-240
• /
• 2007

Objective: The purpose of this study was to investigate the maxillary protraction effects of the Tandem Traction Bow Appliance (TTBA), a new appliance devised several years ago for the treatment of growing skeletal Class III patients. Methods: Participants were 88 Korean children (42 boys, 46 girls) with skeletal Class III malocclusion treated with TTBA at the orthodontic clinic of Ewha Womans University Mokdong Hospital. Mean age at the start of treatment was 7.5 years${\pm}$1.5 years. Mean treatment periods were $13{\pm}3$ months. Pretreatment and posttreatment lateral cephalograms were traced and superimposed by the same investigator and analyzed by modified McNamara analysis and pitchfork analysis. Changes were evaluated with paired t-tests at a significance level of p<0.05. Results: The maxilla and maxillary dentition moved forward. The mandible moved backward, although not significantly; and the mandibular dentition moved forward. The net dental changes combined with the apical base change resulted in a favorable total molar relationship correction. Net dental movement was 26% and the apical base change 74% of the total molar relationship correction. Conclusion: These results suggest that TTBA has a maxillary protraction effect that can be useful in the treatment of growing skeletal Class III malocclusion with maxillary deficiency.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.287-295
• /
• 2013

PURPOSE. This study investigated the effect of laser parameters and air-abrasion on the peel strength of silicon-based soft denture liner to different denture resins. MATERIALS AND METHODS. Specimens (N=180) were prepared out of three different denture base resins (Rodex, cross-linked denture base acrylic resin; Paladent, heat-cured acrylic resin; Deflex, Polyamide resin) ($75mm{\times}25mm{\times}3mm$). A silicon-based soft denture liner (Molloplast B) was applied to the denture resins after the following conditioning methods: a) Air-abrasion ($50{\mu}m$), b) Er,Cr:YSGG laser (Waterlase MD Turbo, Biolase Technology) at 2 W-20 Hz, c) Er,Cr:YSGG laser at 2 W-30 Hz, d) Er,Cr:YSGG laser at 3 W-20 Hz, e) Er,Cr:YSGG laser at 3 W-30 Hz. Non-conditioned group acted as the control group. Peel test was performed in a universal testing machine. Failure modes were evaluated visually. Data were analyzed using two-way ANOVA and Tukey's test (${\alpha}$=.05). RESULTS. Denture liner tested showed increased peel strength after laser treatment with different parameters ($3.9{\pm}0.4-5.58{\pm}0.6$ MPa) compared to the control ($3.64{\pm}0.5-4.58{\pm}0.5$ MPa) and air-abraded groups ($3.1{\pm}0.6-4.46{\pm}0.3$ MPa), but the results were not statistically significant except for Paladent, with the pretreatment of Er,Cr:YSGG laser at 3 W-20 Hz. Polyamide resin after air-abrasion showed significantly lower peel strength than those of other groups ($3.1{\pm}0.6$ MPa). CONCLUSION. Heat-cured acrylic resin, PMMA, may benefit from Er,Cr:YSGG laser treatment at 3 W-20 Hz irradiation. Air-abrasion of polyamide resins should be avoided not to impair their peel bond strengths to silicon-based soft denture liners.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.194-199
• /
• 2008

In this study, the effective method to esterify the free fatty acids in jatropha oil was examined. Compared to other plant oils, the acid value of jatropha oil was remarkably high, 11.5 mgKOH/g. So direct transesterification by a base catalyst was not suitable for the oil. After the free fatty acids were esterified with methanol, jatropha oil was transesterified. The activities of four solid acid catalysts were tested and Amberlyst-15 showed the best activity for the esterification. After constructing the experiment matrix based on RSM and analyzing the statistical data, the optimal esterification conditions were determined to be 6.79% of methanol and 17.14% of Amberlyst-15. After the pretreatment, jatropha biodiesel was produced by the transesterification using KOH in a pressurized batch reactor. Jatropha biodiesel produced could meet the major specifications of Korean biodiesel standards; 97.35% of FAME, 8.17 h of oxidation stability, 0.125% of total glycerol and $0^{\circ}C$ of CFPP.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.361-373
• /
• 2002

The purpose of this study was to evaluate the morphological changes of olveolar bone and mandibular symphysis of lower incisor by presurgical orthodontic treatment and orthognathic surgery in skeletal class III malocclusion. The sample consisted of 30 adult class III malocclusion patients who have received bilateral sagittal split mandibular osteotomy. Lateral cephalograms were taken before treatment, after presurgical orthodontic treatment and 3 months after orthognathic surgery. Skeletal and symphyseal measurements were compared and the relationships between them were analysed. The results were as follow : 1. The labial and lingual alveolar bone height in presurgical and postsurgical group were decreased than that of pretreatment group. 2. The vertical measurements of the craniofacial skeleton showed reverse correlationship with anteroposterior width of basal alveolar bone, but IMPA showed correlatiionship (p<0.01) 3. The craniofacial skeleton and the change of symphyseal measurements(symphyseal length, symphyseal width) showed no correlationship. 4. The labial alveolar bone height showed correlationship with lingual alveolar bone height(p<0.001), and negative correlationship with lingual alveolar crestal width(p<0.01). Labial and lingual alveolar crestal width has negative correlationship (p<0.05). Mandibular symphyseal length and width has positive correlationship(p<0.01). 5. IMPA, LISA showed negative correlationship with labiolingual alveolar bone height and lingual alveolar width and positive correlationship with labial alveolar base bone width.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.390-397
• /
• 2022

Parylene-C which was mainly used for industries such as electronics, machinery and semiconductors has recently been in the spotlight in the medical field due to its properties such as corrosion resistance and biocompatibility. In this study we intend to derive a plan to improve the bonding strength of Parylene-C coating with the SUS304 base material for medical use which can be applied to various medical fields such as needles, micro needles and in vitro diagnostic device sensors. Through plasma pretreatment the bonding strength between Parylene-C and metal materials was improved. It was confirmed that the coated surface was hydrophobic by measuring the contact angle and the improvement of the surface roughness of the sample manufactured through CNC machining was confirmed by measuring the surface roughness with SEM. Through the above results, it is thought that it will be effective in increasing usability and reducing pain in patients by minimizing friction when inserting medical devices and in contact with skin. In addition it can be applied to various application fields such as human implantable stents and catheters, and is expected to improve the performance and lifespan of medical parts.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.9
• /
• pp.33-40
• /
• 2022

Sedimentation and pH neutralization has been investigated as preteatment of acid contaminate water. The settling and neutralizing process derive more effective degradation efficiency as the pre-treatment process before the removal process of adsorption, volatile, biodegradation, or oxidation. Settling velocity, uniformity coefficient, coefficient of curvature, and grain size index can define in the sedimentation process for characteristics of the soil. The stainless steel sieve has been used to separate each particle size of the dry soil by assembling in order of 4, 10, 20, 40, 80, 100, and 200 mesh sizes. The soil from Gamcheon Port in Busan drops upper side of the sieve and shakes back and forth to separate each different size of the particle. The 1L of Imhoff cone and 200 mL of the mass cylinder were used as settling tanks to calculate settling velocity. Stokes' equation was used to figure out the average density of dry soil with a value from settling velocity. In the results, the average particle density and lowest settling velocity were 1.93 g/cm³ and 0.11 cm/s, respectively. These values can detect the range of settling points of sediment to prevent chemical accidents. In pH neutralization, the initial pH of 2, 3, 4, and 5 of nitric acid and sulfuric acid are used as an acid solution; 0.1, 0.01, and 0.001 M of sodium hydroxide and calcium hydroxide are used as a base solution. The main goal of this experiment is to figure out the volume percentage of the acid solution becomes pH 7. The concentration of 0.001 M of base solution exceeds all the conditions, 0.01 M exceeds partially, and 0.1 M does not exceed 5 v/v% except pH 2. Calcium hydroxide present less volume than sodium hydroxide at pH neutralization both sulfuric and nitric acid.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.1
• /
• pp.68-76
• /
• 1998

Background: Patients with centrally recurred bronchogenic carcinoma make a complaint of many symptoms like hemoptysis, cough & dyspnea. At these conditions, the goal of treatment is only to relieve their symptoms. High dose rate brachytherapy(HDR-BT) is the palliative treatment modality of centrally located endobronchial tumor regardless of previous external irradiation(XRT) on the same site in symptomatic patients. Methods: We studied the effects of HDR-BT in 26 patients with symptomatic recurrent lung cancer. Patients(male: 24, mean age: 54yrs)were treated with HDR-BT underwent bronchoscopic placement of $^{192}Ir$ HDR after loading unit(Gammamed$^{(T)}$, Germany) to deliver 500cGY intraluminal irradiation at a depth of 1cm every lwk on 3 occasions. Evaluation at base line and 4wks after HDR brachytherapy included chest X-ray, bronchscopy, symptoms (Standadized Scale for dyspnea,cough,hemoptysis), and Karnofsky performance scale. Results: Endobronchial obstruction was improved in 11/26 patients(37%). Atelectasis in chest X-ray was improved in 5/15 patients(33%). Hemoptysis, dyspnea & cough were improved in 5/10 patients (50%), 5/8 patients (62%) & 10/18 patients (56%) respectively. Karnofsky performance status was changed from 76.4 scores in pretreatment to 77.6 scores after treatment. During HDR-BT, massive hemoptysis (2 patients) and pneumothorax(1 patient) were occurred as complications. Conclusion: We concluded that HDR-BT gave additional benefits for the control of symptoms and general performance and endobronchial obstruction & atelectasis. And HDR-BT will be an additional treatment for the recurrent and endobronchial obstructive lung cancer.

• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.640-647
• /
• 2021

In this study, we analyzed three rice pre-treatment methods for the preparation of mit-sool (first mashing), with godubap (steamed rice), beombeok (undercooked porridge), and juk (porridge). The results can provide basic data for the development of takju with improved quality. In terms of the base alcohol, godubap produced the highest amount of alcohol (8.1%) after two days, followed by beombeok and juk. After two days of fermentation, soluble solids were measured at 15.3, 15.1, and 1.4°Brix in beombeok, juk, and godubap, respectively, The glucose content of godubap did not change significantly; however, the maltose content increased. In beombeok, maltose decreased from 16.48 mg/mL on the initial day 0 to 1.27 mg/mL on day 9. In juk, glucose and maltose increased from 14.05 and 11.49 mg/mL on day 0 to 31.39 and 42.53 mg/mL on day 2, respectively. Succinic acid levels increased in the godubap and beombeok mit-sool. However, succinic acid was not detected in godubap and juk during the initial stage of fermentation, and lactic acid was not detected in beombeok mit-sool. During the fermentation stage of deot-sool (second mashing), the highest alcohol content of takju made with godubap alcohol was 18.0% and the lowest alcohol content was 15.1% in beombeok on day 9. The total acidity was as high as 0.54% for beombeok, 0.41% for juk, and 0.39% for godubap. In the flavor analysis, ethyl caprate and ethyl caprylate, which were high on day 0 in godubap, decreased upon the completion of fermentation on day 9. Banana-flavored isoamyl alcohol content increased. For juk, ethyl caprate and ethyl caprylate, which were high on day 0, decreased on day 9. Flavor components, such as ethyl palmitate and ethyl linoleate were increased.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.4
• /
• pp.451-463
• /
• 2006

Background : Reactive oxygen species (ROS) take center stage as executers in ventilator-induced lung injury (VILI). The protein with DNA-damage scanning activity, poly (ADP-ribose) polymerase-1 (PARP1), signals DNA rupture and participates in base-excision repair. Paradoxically,overactivation of PARP1 in response to massive genotoxic injury such as ROS can induce cell death through ${\beta}$ -nicotinamide adenine dinucleotide ($NAD^+$) depletion, resulting in inflammation. The purpose of this study is to investigate the role of PARP1 and the effect of its inhibitor in VILI. Methods : Forty-eight male C57BL/6 mice were divided into sham, lung protective ventilation(LPV), VILI, and PARP1 inhibitor (PJ34)+VILI (PJ34+VILI) groups. Mechanical ventilator setting for the LPV group was $PIP\;15cmH_2O$ + $PEEP\;3cmH_2O$ + RR 90/min + 2 hours. The VILI and PJ34+VILI groups were ventilated on a setting of $PIP\;40cmH_2O$ + $PEEP\;0cmH_2O$ + RR 90/min + 2 hours. As a PARP1 inhibitor for the PJ34+VILI group, 20 mg/Kg of PJ34 was treated intraperitoneally 2 hours before mechanical ventilation. Wet-to-dry weight ratio and acute lung injury (ALI) score were measured to determine the degree of VILI. PARP1 activity was evaluated by using an immunohistochemical method utilizing biotinylated NAD. Myeloperoxidase (MPO) activity and the concentration of inflammatory cytokines such as tumor necrosis factor $(TNF)-{\alpha}$, interleukin $(IL)-1{\beta}$, and IL-6 were measured in bronchoalveolar lavage fluid (BALF). Results : In the PJ34+VILI group, PJ34 pretreatment significantly reduced the degree of lung injury, compared with the VILI group (p<0.05). The number of cells expressing PARP1 activity was significantly increased in the VILI group, but significantly decreased in the PJ34+VILI group (p=0.001). In BALF, MPO activity, $TNF-{\alpha}$, $IL-1{\beta}$, and IL-6 were also significantly lower in the PJ34+VILI group (all, p<0.05). Conclusion : PARP1 overactivation plays a major role in the mechanism of VILI. PARP1 inhibitor prevents VILI, and decreases MPO activity and inflammatory cytokines.