• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.647-661
• /
• 1997

The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it has been developed for luting of fixed restorations. To evaluate the bond strength and marginal leakage of RMGICs for luting usage, the 80 extracted human molars which had uniform area of exposed dentin were cemented with 3 types of RMGICs(Fuji Duet, Advance, Vitremer), a conventional Glass Ionomer Cement(GIC-Fuji I), and a resin cement (Panavia 21) to base metal alloy(Ni-Cr-Be). After thermocycling the specimens were immersed in basic fuschin dye for measuring marginal leakage. The shear bond strength was measured with Instron and the maximum dye penetration was measured to 0.1mm. The types of fractured patterns were determined with stereoscope(${\times}7.5$). The results are as follows. 1. The difference between 3 RMGICs and a conventional GIC in shear bond strength was not statistically significant. It seemed that RMGICs had lower shear bond strength than resin cement. (p<0.01) 2. The mean scores of marginal leakage had no significant difference between the resin cement and 3 RMGICs but it was much higher in conventional GIC than the RMGICs (p<0.05) 3. It was determined that the manufacturer and the methods of dentin pretreatment determined the pattern of fracture surfaces and the frequency of adhesive failure between teeth and 3 RMGICs standed as in following order - Vitremer, Advance, Fuji Duet. (p<0. 01) When the fracture pattern was analyzed, it could be said that the materials and the method of dentin pretreatment have much effect on bonding states. This means that the dentin bonding agents should be improved. But the limited products in this experiment can not evaluate the physical properties of the entire RMGICs. Therefore a further study which can evaluate various RMGICs should be in progress to develope better cements.

• KSBB Journal
• /
• 제24권3호
• /
• pp.267-272
• /
• 2009

셀룰로오즈는 포도당 단위체가 $\beta$-1,4-glucoside결합을 이뤄 긴 사슬형태를 띈다. 또한 리그노셀룰오로직 물질에서의 셀룰로오즈 중 $50{\sim}90%$는 수소결합에 의해 결정형으로 존재하고 나머지 부분은 무정형으로 존재한다. 본 연구에서는 셀룰로오즈를 구성하는 포도당의 분해 생성물을 화인하기 위해 셀룰로오직 바이오매스 (유채대)와 1.5 g/l의 순수한 포도당을 반응온도 $164^{\circ}C$, 산 농도 0.77% (w/w) $H_2SO_4$, $0{\sim}20$ min동안 묽은 산 가수분해 시켜 분해물의 생성량 변화를 관찰하였다. 포도당을 묽은 산에 의해 분해시키면 탈수반응에 의해 1,6-anhydroglucose가 생성되며, 또한 포도당의 이성질체인 과당으로 전환되고 이 과당은 HMF와 포름산으로 전환된다. 또한 산 농도, 반응온도가 포도당 분해에 영향을 미치는 주요 변수임을 확인할 수 있었다. 그리고 분해생성물 중 하나인 HMF 1.308 g/l를 반응온도 $164^{\circ}C$, 산 농도 0.77% (w/w) $H_2SO_4$, $0{\sim}20$ min동안 산 가수분해 시켜 HMF와 HMF 분해물의 변화를 확인하였다.

• 공업화학
• /
• 제9권3호
• /
• pp.404-406
• /
• 1998

가스 크로마토그래피(GC)와 가스 크로마토그래피(HPLC)를 이용하여 imidazoline계 양이온 계면활성제 분석을 수행하였다. 염기 가수분해와 산 가수분해 후 GC로 imidazoline ring의 original fatty acid의 alkyl chain 분포를 조사하였다. 역상 C18 분리관을 사용하고 0.1M $NaClO_4$가 함유된 methanol과 acetonitrile의 50:50(v/v)액을 용리액으로 할 때 imidazoline의 homologous한 total alkyl chain 분포가 HPLC에서 훌륭하게 분리되었으며, GC 결과와 좋은 일치를 보여주었다. 본 연구의 분석법으로, imidazoline계 양이온 계면활성제의 소수성 alkyl chain 분석 및 평균 분자량 결정이 가능하였으며, 전처리 필요없이 HPLC법을 이용한 imidazoline 의 검출한계는 10ng이었다.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.86-94
• /
• 1999

Alkaline peroxide bleaching of chemi-mechanical pulp is a very complicated system where various process factors affect the bleacing performance and pulp properties. Traditional onefactor-at a time method is ineffective and costly infinding the optimal bleaching conditions. In this study, statistical experimental design and multiple regression method wre used to investigated the interactions among various bleaching factors and to find out the possbile maximal brightness development during one stage alkaline peroxide bleacing of TMP. The TMP was made from 10% Korean red pine and 90% Korean spruce and had an initial brightness of 54.5% ISO. the TMP was pretreated with EDTA(0.5% on O.D. pulp, 3% pulp consistency, 30$^{\circ}C$ for 60 minutes) and bleached in a 2 L Mark V Quantum Reactor at 750 rmp, 7.5% of bleaching consistency and with 0.05% magnesium sulfate addition. The ranges of chemical factors studied , based on oven-ried pulp, were 1-5% for hydrogen peroxide, 1-4% for sodium hydroxide and 1-4% for sodium silicate. The rages of reaction temperature and time were 50-90$^{\circ}C$ and 40-180minutes respectively. Interactions of hydrogen peroxide with alkali , time with temperature ature, alkali with time and silicate with temperature were found to be significant which means that hydrogen peroxide bleaching will be favored at stable concentration of perhydroxyl ion, relatively short time and low temperature, and high level of silicate. Mathematical model which has good predictability for target brightness in one stage peroxide bleaching can also be established easily. Base ion the model, maximal brightness of 70% ISO was found to at 50$^{\circ}C$ and 50 minutes by chemical additions of 5% for hydrogen peroxide, 3.2-3.4% for sodium hydroxide and 4% for silicate based on O.D. pulp. However, this result might not be suitable for situation where furnishes are different from ours, or different pretreatment is used, or bleaching carried out at different pulp consistency. In these cases it will be good to re-investigate the process by a similar methodology as was used in this study.

• 대한치과교정학회지
• /
• 제41권2호
• /
• pp.138-146
• /
• 2011

The purpose of this article is to introduce a new virtual orthodontic treatment (VOT) system, which can be used to construct three-dimensional (3D) virtual models, establish a 3D virtual setup, enable the placement of the virtual brackets at the predetermined position, and fabricate the transfer jig with a customized bracket base for indirect bonding (IDB) using the stereolithographic technique. A 26-year-old woman presented with anterior openbite, crowding in the upper and lower arches, and narrow and tapered upper arch, despite having an acceptable profile and balanced facial proportion. The treatment plan was rapid palatal expansion (RPE) without extraction. After 10 days of RPE, sufficient space was obtained for decrowding. After a 10-week retention period, accurate pretreatment plaster models were obtained using silicone rubber impression. IDB was performed according to the protocol of the VOT system. Crowding of the upper and lower arches was effectively resolved, and anterior openbite was corrected to normal overbite. Superimposition of the 3D virtual setup models (3D-VSM) and post-treatment 3D virtual models showed that the latter deviated only slightly from the former. Thus, the use of the VOT system helped obtain an acceptable outcome in this case of mild crowding treated without extraction. More cases should be treated using this system, and the pre- and post-treatment virtual models should be compared to obtain feedback regarding the procedure; this will support doctors and dental laboratory technicians during the learning curve.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.563-568
• /
• 2017

In this study, the coating of an Al-Cr layer on the surface of a Zircaloy-4 alloy was carried out through plasma pretreatment coating and a laser surface melting process. Two different conditions for laser treatment, severe or minimal surface melting of the Zr alloy substrate, were applied to form the final coating. When there was significant surface melting of the Zr alloy, the solidification microstructure of the newly formed coating layer was mainly composed of needle-shaped $Al_3Zr$, Al(Cr) and $Al_7Cr$ phases. On the other hand, the solidification microstructure of the coating layer was mainly composed of Al(Cr) and $Al_7Cr$ phases when there was minimal surface melting of Zr base in the laser process. However, when the coating was maintained at $1100^{\circ}C$ for 2 hours, significant inter-diffusion occurred between the phases in the coating. As a result, the upper part of the coating layer was observed to mainly consist of $Al_3Zr$ and $Al_8Cr_5$ phases, regardless of the laser treatment conditions.

• 센서학회지
• /
• 제5권1호
• /
• pp.15-22
• /
• 1996

감광성 고분자를 감지막 재료로 한 FET형 $Ca^{2+}$ sensor(Ca-ISFET)를 micropool법 및 사진식각법으로 제조하였다. 반도체 공정에 쓰이는 negative photoresist인 OMR-83을 감지막 재료로 사용한 경우, micropool법에 있어서는 가소제인 DOA를 포함하므로 좋은 감응 특성을 나타내었으나, 사진식각법에 있어서는 가소제를 사용할 수 없어 부적합하였다. Poly(vinyl butyral)을 감지막 재료로 하고, 사진식각법으로 제조된 Ca-ISFET는 $Ca^{2+}$ 농도 $10^{-4}{\sim}10^{-1}\;mole/{\ell}$ 범위에서 좋은 직선성을 나타내었으며, 감응기울기는 $23{\pm}0.2\;mV/decade$였다. 감지막 재료로서 PVB는 바탕소자인 pH-ISFET wafer 위에 adhesion promoter 용액의 전처리를 하지 않아도 양호한 부착력을 나타내었으며, 가소제 이행의 문제가 없어서 막의 안정성이 좋은 특성이 있었다.

• 한국염색가공학회지
• /
• 제29권3호
• /
• pp.122-130
• /
• 2017

In the direct digital textile printing process, the pre-treatment process is an essential condition for products by forming a clear pattern by sticking and penetration of DTP dye without spreading on the fabric. Recently, pre-treatment agent is changing from high viscosity to low viscosity in order to reduce defects of fabric during pre-treatment process. In this study, pre-treatment agent of acrylic polymer with low viscosity(less than 50cps) was prepared according to the solid content of the polymer, pre-treated on the cotton fabric, and direct DTP printing was performed to compare the color and sharpness. As a result, it showed high color at a viscosity of 50cps or less. When the solid content of the polyacrylic acid having a high molecular weight(A1) was 2.5wt%, when the solid content of the polyacrylic acid having a low molecular weight(A2) was 1 - 1.5wt%, the color was the best. And when the solid content of A1 and A2 was 1.5wt%, the degree of spreading was small and A1 was superior to A2 at the sharpness.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1497-1504
• /
• 2009

GC/MS analysis of catecholamines (CAs) in biological sample may produce poor reproducible quantitaion when chemical derivatization is used as the technique to form a volatile derivative. Significant quantities of the side products can be formed from CAs with primary amine during the derivatization reaction under un-optimized conditions. We have tested various chemical derivatization techniques in an attempt to find an optimum derivatization method that will reduce side product formation, enable to separate several catecholamine derivatives in GC chromatogram, and obtain significant improvement of detection sensitivity in GC/MS analysis. Whereas several derivatization techniques such as trimethylsilylation (TMS), trifluoroacylation (TFA), and two step derivatization methods were active, selective derivatization to form O-TMS, N-heptafluorobutylacyl (HFBA) derivative using N-methyl-N-(trimethylsilyl)-trifluoroacetamide (MSTFA) and N-methyl-bis(heptafluorobutyramide) (MBHFBA) reagents was found to be the most effective method. Moreover, this derivative formed by selective derivatization could provide sufficient sensitivity and peak separation as well as produce higher mass ion as base peak to use selected ion in SIM mode. Calibration curves based on the use of an isotopically labeled internal standard show good linearity over the range assayed, 1 ~ 5000 ng/mL, with correlation coefficients of > 0.996. The detection limits of the method ranged from 0.2 to 5.0 ppb for the different CAs studied. The developed method will be applied to the analysis of various CAs in biological sample, combined with appropriate sample pretreatment.

• The Korean Journal of Physiology
• /
• 제20권1호
• /
• pp.125-133
• /
• 1986

Ethanol이 고양이 회장 종주근의 수축에 미치는 영향을 관찰한 결과 정상 Tyrode용액에서는 $0.5{\pm}4%$ 범위내에서 자발적 수축 및 기초장력을 억제하였으나 $Na^+$이 surcose로 대치된 용액에서는 수축을 유발시켰다. 이러한 수축은 ethanol의 농도에 비례하여 증가하였으며 용액내의 Na-free 용액으로 처리한 기간이 길수록 증가하였다. 용액내 $Ca^{2+}$이 없는 경우에도 ethanol에 의한 수축은 $La{+3}$에 의해 억제되었으나 verapamil을 전처치한 후 Na-free액을 처리했을 때는 수축이 나타나지를 않았다. Ethanol은 $^45Ca$의 유출에는 어떤 영향을 나타내지는 못하였다. 이상의 결과로 보아 Na-free용액에서 ethanol은 세포막에 결합하고 있는 $Ca^{2+}$이나 세포내부에 결합하고 있는 $Ca^{2+}$의 세포내로 유리를 증가시켜 수축을 유발시키는 것으로 사료된다.