• 치과방사선
• /
• 제29권1호
• /
• pp.299-308
• /
• 1999

Purpose: The purpose of this study was to compare the qualities of the four different processing chemicals (solutions). Materials and Methods: With EP 21 films(Ektaspeed plus film, Kodak Co., USA), nine unexposed and nine exposed films of a step wedge were processed utilizing automatic film processor(XR 24, Durr Co., Germany) for 5 days. During 5 days, the total number of processed films including out-patient' s intraoral films were about 400-500 for each brand. Base plus fog density, film density, contrast of processed films were measured with densitometer(model 07-443 digital densitometer, Victoreen Co., USA). These measurements were analyzed for comparison. Results: The results were as follows, 1. For the base plus fog density. there was significant difference among the four chemicals (p<0.05). The sequence of the base plus fog densities was in ascending order by Kodak, X-dol 90. Agfa and Konica. 2. For the film density. all chemicals showed useful range of photographic densities(0.25-2.5). The sequence of the film densities was in ascending order by Kodak, X-dol 90, Konica and Agfa. But there was no statistically significant difference of film density between X-dol and Kodak (p<0.05). 3. The sequence of the contrasts was in ascending order by Konica, X-dol 90, Kodak and Agfa. But there was no statistically significant difference of contrast between X-dol and Konica (p<0.05). Conclusion: These results indicated that the four processing chemicals had clinically useful film density and contrast. but only Kodak processing chemical had useful base plus fog density.

• 치과방사선
• /
• 제17권1호
• /
• pp.197-207
• /
• 1987

This study was undertaken to investigate the relationships between film and processing solution at different processing temperatures. Three kinds of periapical film were used for this study. They included EP-2l film, DF-58, and A film Each film was processed by automatic film processor with RD-Ⅲ X-dol 90, and A processing solutions at 68° 74° 80° 86° and 92°F. Film density was measured with the densitometer, and base plus fog density, film relative speed, film contrast, and subject contrast were evaluated. The following results were obtained; 1. As the processing temperature was increased, base plus density was increased. Inadequate base plus fog densities were obtained with three films in combination with three processing solutions at 92°F. 2. Lowest base plus fog densities were obtained with A film, followed in ascending order by EP-21, and DF-58 film in combination with A or RD-Ⅲ processing solutions. The sequence of base plus fog densities was in ascending order by EP-21, A, and DF-58 film in combination with X-dol 90 processing solution. 3. The sequence of film relative speed values was in ascending order of EP-21, A, and DF-58 film in combination with A and RD-Ⅲ processing solutions, respectively. 4. As the processing temperature was increased, film contrast values was increased. The sequence of film contrast values was in descending order solution. The sequence of film contrast values was in descending order of EP-2l, DF-58, and A film in combination with RD-Ⅲ, X-dol 90 processing solution at 80°F. 5. As the processing temperature was increased, subject contrast was increased. The sequence of subject contrast was in descending order of A, X-dol 90, and RD-Ⅲ processing solution in combination with three films at 80°F. The sequence of subject contrast was in descending order of EP-21, A, and DF-58 film in combination with A processing solution at different processing temperatures.

• Imaging Science in Dentistry
• /
• 제33권1호
• /
• pp.21-26
• /
• 2003

Purpose: To investigate the characteristics of the newly marketed, Insight dental X-ray film. Materials and Methods: Kodak Ultraspeed (DF-58), E-speed, Agfa Dentus M2, and Kodak Insight (IP-21) films were radiographed using a Trophy intra-oral radiographic machine. 10 step exposure times were prepared and each step exposure was monitored using a FH 40G (ESM Eberline Instruments) dosimeter for each of the 4 types of intra-oral film. All films were manually processed and the radiographic densities at 6 sites of each processed film were measured, and the characteristic curves of each of the 4 types intra-oral films were created utilizing these dosimetric data and radiographic densities, based on ISO 5779. The film contrast, speed, and base plus fog density of Insight film were compared with those of the 3 other films examined in this experiment. Results : E-speed film showed greatest average gradients followed by Insight film. E-speed and Ultraspeed film showed great average gradients at low density levels. Insight film showed the fastest speed followed by E-speed, Dentus M2 and Ultraspeed film. Dentus M2 film showed greatest base plus fog density level followed by Insight film. Conclusion : Kodak Insight film showed fastest film speed with comparable film contrast on characteristic curve.

• Imaging Science in Dentistry
• /
• 제31권1호
• /
• pp.17-22
• /
• 2001

Purpose: To compare the film density of Insight dental X-ray film (Eastman Kodak Co., Rochester, NY, USA) with that of Ektaspeed Plus film (Eastman Kodak) under manual and automatic processing conditions. Materials and Methods : Insight and Ektaspeed Plus films were exposed at three different exposure conditions with an aluminum step wedge on the films under the three different exposure times. The exposed films were processed by both manual and automatic ways. The Base plus fog density and the optical density made by exposing step wedge were calculated using a digital densitometer (model 07-443, Victoreen Inc, Cleveland, Ohio, USA). The optical densities of the Insight and Ektaspeed film versus thickness of alumimun wedge at the same exposure time were plotted on the graphs. Statistical analyses were applied for comparing the optical densities of the two films. Results: The film density of both Insight films and Ektaspeed Plus films under automatic processing condition was significantly higher over the manual processing. The film density of Insight films was significantly higher than that of Ektaspeed Plus films on both automatic and manual processing conditions. Conclusion: The radiation exposure time can be reduced when using Insight over Ektaspeed Plus film. To take the full advantage of reducing exposure time, Insight film should be processed automatically.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.49-53
• /
• 1999

To inquire its usefulness of the clinical application of intelligent replenishment system of automatic X-ray film processor based on film density, we processed the serial 300 sheets of radiographic film of chest [$14{\times}14"$, HR-C type] and bone [elbow & ankle($8{\times}10"$), skull($10{\times}12"$), hand & foot($11{\times}14"$), pelvis($14{\times}17"$), HR-G type, 68, 70, 77, 85 sheets respectively]. We analyzed the characteristic corves, relative speeds, average gradients and base plus fog densities every twenty five sheets. We also evaluated the developer and fixer replenishment volumes every that time. In the chest and bone radiograph two all, the characteristic curves were little change, and the relative speeds, average gradients and base plus fog densities were within the maximum control limits. The average developer replenishment volumes were about 43m1/sheet and 39m1/sheet respectively. It brings decreased results about 29% in comparison with the conventional replenishment system. In our experiences, we conclude that the intelligent replenishment system of automatic X-ray film processor based on film density maintains image quality consistently, decreases also the replenishment volumes. Therefore, this system will be resulted in economic and environmental effects, and solve problems of over and low replenishment volume.