• 제목/요약/키워드: base expansion

검색결과 389건 처리시간 0.029초

CDMA통신망에서 파일롯 채널전력 측정 및 분석에 관한 연구 (A Study on Measurement and Analysis of Pilot Channel Power at CDMA Communication Network)

  • 정기혁;나극환
    • 대한전자공학회논문지TC
    • /
    • 제44권6호
    • /
    • pp.31-39
    • /
    • 2007
  • 본 논문에서는 코드분할다중접속방식을 사용하는 이동통신 시스템에서 기지국의 순방향 송신전력 및 파일롯 전력 등 RF 파라미터를 실시가 또는 주기적으로 측정하여 분석함으로써 시스템의 장애를 미연에 방지하고 셀커버리지 확대, 가입자 수용용량 증가 등 최적의 서비스 품질을 확보하고 투자효율을 극대화하기 위한 방안을 제시하였다. 순방향 전력 측정에서는 디텍터 내의 국부발진기 주파수를 가변함으로써 모든 채널의 송신출력을 측정할 수 있도록 하였다. 채널전력의 측정에 의하여 통화량 증가에 따른 송신출력의 변화를 관찰할 수 있으며, 순방향 $E_c/I_o$ 와의 비교를 통하여 파일롯 채널의 전력을 유추함으로써 대전력증폭기 등 송신부 모듈의 열화를 판독할 수 있도록 하였다. 일련의 모든 측정에는 CDMA 레벨디텍터에 의한 정밀 계측에 이은 정확한 분석이 이루어져야 하므로 변조방식 차이에서 오는 Crest factor 가 상이함으로 인한 측정상의 오차를 극복할 수 있도록 설계하였다.

세라믹-세라믹 컴포넌트 접합용 글라스 실란트의 제조 및 접합력 평가 (Fabrication and Adhesion Strength Evaluation of Glass Sealants for Ceramic to Ceramic Component Joining)

  • 허유진;김효태
    • 마이크로전자및패키징학회지
    • /
    • 제26권4호
    • /
    • pp.89-94
    • /
    • 2019
  • 전력저장용 전기에너지 저장장치의 일종인 NaS 전지 단위 셀을 개발함에 있어서 알파-알루미나 절연세라믹 캡과 베타-알루미나 전해질 튜브 간의 세라믹-세라믹 상호 접합을 위하여 글라스 기반의 실링소재가 필요하다. 본고에서는 이 세라믹-세라믹 접합용 글라스 실링 페이스트를 제조함에 있어서, 열간 칭법에 의한 글라스 프릿 제조와 상분석, 분말입도 분석 및 글라스 조성에 따른 열팽창계수 변화 및 표면거칠기를 분석하였다. 또한 글라스 실란트의 접합력 평가를 위해 종래 솔더 볼 조인트의 접합력 평가용 분석장비인 Dage bond tester를 이용하여 세라믹-세라믹 컴포넌트의 작은 접합면에 대한 접합력 측정 방법을 제안하였다.

스털링 엔진에 대한 스크롤 팽창기 : 압축기의 적용성 (Applicability of Scroll Expander-compressor for Stirling Engine)

  • 김성준;김현진;김영민
    • 설비공학논문집
    • /
    • 제21권2호
    • /
    • pp.94-102
    • /
    • 2009
  • Conceptual design of scroll expander and scroll compressor for 10kW-class Stirling engine utilizing solar energy as heat source has been carried out to estimate the applicability of scroll mechanism for Stirling cycle. CO2 was chosen as working fluid, since it has lower expansion index and higher density among probably usable gases. Gas temperature at the expander inlet was set at $700^{\circ}C$, and that at the compressor inlet was at $40^{\circ}C$. System efficiency reached maximum at the pressure ratio of about 2.5, and the peak efficiency increased with increasing high side pressure. Due to safety concern, the pressure condition of 6 MPa/2.5 MPa was chosen as design condition. Orbiting scroll members for the expander and compressor were designed to have double-sided structure in order to reduce the overall scroll size and to cancel out the axial gas forces acting on the orbiting scroll base plate. By parametric study on the scroll profile, smaller possible size for the scroll members was obtained. With the shaft speed of 3600rpm, the shaft output of the designed scroll expander was calculated to be 45.4kW, while input power for the scroll compressor was 34.5kW, yielding 10.9kW for the output power of the Stirling engine. System efficiency was estimated to be about 7.3%, and overall efficiencies of the scroll expander and compressor were around 84.1% and 88.3%, respectively.

디젤엔진에 적용하기 위한 SiC DPF용 접합제의 극성 및 첨가물에 따른 물리적 특성 변화에 관한 연구 (Study on the Change of Physical Characteristics by Polarity and Additives of SiC DPF Binder for Diesel Engine Application)

  • 김진원;류영현
    • 해양환경안전학회지
    • /
    • 제25권7호
    • /
    • pp.974-981
    • /
    • 2019
  • 미세먼지발생 문제는 커다란 사회적 문제로 대두되고 있다. 선박에서는 주 추진 동력원으로 디젤엔진을 주로 사용하고 있다. 본 연구에서는 디젤엔진에서 발생하는 미세먼지로 알려진 입자상 물질을 줄이기 위해서 디젤엔진의 후처리시스템으로 사용 중인 DPF(디젤미립자 필터, Diesel particulate filter)를 소개하고자 한다. DPF의 소재로는 Cordierite와 SiC (Silicon carbide)의 두 가지가 사용되고 있다. 본 논문에서는 SiC DPF에 사용되는 접합제의 물성 향상을 위해서 기존 접합제로 사용된 SiC 계열의 물질 대신 코디얼라이트를 사용하여 열팽창계수 변화를 통한 고온 변형에 대한 열 내구성을 평가하였으며, 접합제와 Segment 사이의 결합을 결정짓는 바탕제에 주성분인 실리카졸의 pH 변화에 따른 물성 변화를 확인하였다. 이를 기반으로 실리카 졸의 반응성을 높이기 위해 Siline계 커플링제를 첨가하거나 SiC를 일부 첨가함으로써 접합제의 물성 변화의 영향에 대해서 실험을 통하여 확인하였다.

A SMALL MODULAR REACTOR DESIGN FOR MULTIPLE ENERGY APPLICATIONS: HTR50S

  • Yan, X.;Tachibana, Y.;Ohashi, H.;Sato, H.;Tazawa, Y.;Kunitomi, K.
    • Nuclear Engineering and Technology
    • /
    • 제45권3호
    • /
    • pp.401-414
    • /
    • 2013
  • HTR50S is a small modular reactor system based on HTGR. It is designed for a triad of applications to be implemented in successive stages. In the first stage, a base plant for heat and power is constructed of the fuel proven in JAEA's $950^{\circ}C$, 30MWt test reactor HTTR and a conventional steam turbine to minimize development risk. While the outlet temperature is lowered to $750^{\circ}C$ for the steam turbine, thermal power is raised to 50MWt by enabling 40% greater power density in 20% taller core than the HTTR. However the fuel temperature limit and reactor pressure vessel diameter are kept. In second stage, a new fuel that is currently under development at JAEA will allow the core outlet temperature to be raised to $900^{\circ}C$ for the purpose of demonstrating more efficient gas turbine power generation and high temperature heat supply. The third stage adds a demonstration of nuclear-heated hydrogen production by a thermochemical process. A licensing approach to coupling high temperature industrial process to nuclear reactor will be developed. The low initial risk and the high longer-term potential for performance expansion attract development of the HTR50S as a multipurpose industrial or distributed energy source.

미류나무 잎절편체 조직배양을 통한 식물체 재분화에 미치는 요인 (Factors influencing Adventitious Shoot induction from Leaves of Populus deltoides Bartr)

  • 신동일;설일환
    • 생명과학회지
    • /
    • 제7권2호
    • /
    • pp.134-141
    • /
    • 1997
  • 미류나무 잎절편 조직배양에 의한 식물체 재분화에 관한 여러 가지 여인을 조사한 결과를 요약하면 다음과 같다. 1. 5가지 각기 다른 농도를 가진 培地에 줅,절편을 치상하여 側牙의 발달을 유기시킨 결과, WPM이 MS배지 보다 더 좋은 반응을 보였고 또한 배지내의 NH$_{4}$NO$_{3}$의 양은 측아 증식에 큰 영향을 미치지 않는 것으로 관찰되었다. 2. 기내에서 증식된 잎을 3부분으로9윗, 중간 그리고 및) 절단하여 2종류의 식물성장 절물질(TDZ와NAA)의 16가지의 농도배합을 사용하여 배양한 결과 TDZ0.01mg/1와 NAA 0.02 mg/1에서 가장 높은 부정줄기 형성체들이 생성되었다. 또한 잎의 윗 부분 보다는 중간과 밑부분에서 높은 부정줄기 형성체들이 생성되었는 것을 관찰하였다. 3. 3가지 탄수화물을 사용하여 부정줄기의 유기를 관찰한 바, sucrose 나 glucose보다 fructose를 첨가한 배지에서 좋은 반응을 보여 주었다.

  • PDF

직렬 궤환을 이용한 아날로그 전치왜곡 선형화기 (An Analog Predistortion Linearizer using Series Feedback Structure)

  • 김일규;전기경;김영;윤영철
    • 한국항행학회논문지
    • /
    • 제10권3호
    • /
    • pp.256-262
    • /
    • 2006
  • 본 논문에서는 증폭기의 비선형 특성인 AM/AM 과 AM/PM 현상을 보상해주는 새로운 형태의 선형화기를 제안하였다. 이 선형화기는 공통 이미터 증폭기와 쇼트키 다이오드를 이미터와 접지 사이에 연결한 형태로 구성되어 있어, 쇼트키 다이오드의 접합 저항 값이 변화함에 따라 이득 증가 와 위상 확장 특성을 얻을 수 있다. 이러한 결과를 이용하여 증폭기의 비선형 특성을 개선시킬 수 있으며, 셀룰라 기지국 주파수 밴드의 증폭기를 제작하여 증폭기의 비선형 특성 개선을 확인하였다. 반송파 2톤 신호를 인가하였을 때, 주파수 간격이 1MHz에서 3차 혼변조 신호는 10.4dB 개선되었고, IS-95 CDMA 1FA 신호에서는 인접채널 전력비가 9.6dB 개선됨을 확인하였다.

  • PDF

GENOME STRUCTURE OF Bombyx mori NUCLEOPOLYHEDROVIRUS

  • SUSUMU MAEDA
    • 한국잠사학회:학술대회논문집
    • /
    • 한국잠사학회 1997년도 Progress and Future Development of Sericultural Science and Technology 40th Anniversary Commemoration Symposium
    • /
    • pp.73-101
    • /
    • 1997
  • Baculoviruses are characterized by large double-stranded circular DNA genomes and rod-shaped enveloped virions. Bombyx mori nucleopolyhedrovirus(BmNPV) is a major pathogen, which causes severe damage in sericulture. Currently, BmNPV is recogtnized as an improtant tool in molecular biology, especially for expression of useful genes in B.mori cells and silkworm larvae. Our laboratories have focused on the studies of the molecular mechanisms of BmNPV replication and the application of BmNPV to agriculture and medicine. The entire nucleotide sequence of the BmNPV genome has recently determined. The BmNPV genome possessed 135 putative genes and 7 homologous repeated sequence (hrs) regions. Relatively little space, a few to a few hundred base-pairs, was observed between the open reading frames and hrs. Termination codons often overlapped. These results showed a compactly packde BmNPV genome. Based on comparative sequence analyses, we speculated that the ancestor of BmNPV was a baculovirus similar to Autographa californica NPV(AcNPV). The function of the BmNPV genes were characterized by gene deletion analysis; p35 was found to be involved in blocking apoptosis and cysteine proteinase was found to be involved in horizontal virus transmission by degrading viral-infected larval host. By AcNPV and BmNPV coinfection experiments, we identified a BmNPV gene involved in expanding host specificity of AcNPV. The identified gene was likely encoded a DNA helicase based on the amino acid sequence analysis; a few amino acid substitutions in the putative DNA helicase gene resulted in the expansion of host range of AcNPV. These findings indicate that BmNPV evolved within a short period from an AcNPV-like ancestral virus due to rapid evolution including specific amino acid substitutions and gene deletions/insertions.

정규화강수증발산지수(NPEI)를 활용한 한반도 농경지의 가뭄심도 평가 (Assessment of Drought Severity on Cropland in Korea Peninsula using Normalized Precipitation Evapotranspiration Index (NPEI))

  • 임철희;김다민;신유승;이우균
    • 한국기후변화학회지
    • /
    • 제6권3호
    • /
    • pp.223-231
    • /
    • 2015
  • Although a considerable part of climate change can be explained by temperature change, hydrological change such as precipitation, evapotranspiration, and runoff impact more on society. For the ascertain a hydrological change in agriculture sector, this study estimate evapotranspiration of cropland in the Korean peninsula, and then to assess the drought severity in the past 30 years through the estimated potential evapotranspiration and observed precipitation. The potential evapotranspiration is estimated by EPIC model and Penman-Monteith method and the drought severity in cropland of the Korean peninsula is assessed using Normalized Precipitation Evapotranspiration Index (NPEI) based on the difference in precipitation and potential evapotranspiration. In North Korea, the estimated evapotranspiration tends to increase even though a significant change is not found due to the change of climate. Although a time series change in drought severity in the past 30 years is not pronounced, a deviation by year and difference between South and North Korea is certain. One reason of this is difference in precipitation and evapotranspiration change according to the latitude. The result including expansion of facilities for water management in North Korea can be used for agricultural decision making, as well as base data of climate change adaptation.

청정화력발전 기술 육성 방안 연구 (A Study on Methods for Developing by Nurturing Clean Thermal Power Generation Technology)

  • 김영미;이원학
    • 한국기후변화학회지
    • /
    • 제9권2호
    • /
    • pp.197-207
    • /
    • 2018
  • The Korean government views coal-fired power plants as the key cause of the fine dust generation, and is developing an energy policy to replace and demolish old coal-fired power plants. According to the Eighth Power Supply Base Plan (2017-2031), the maximum power capacity in 2030 is expected to be 100.5GW, which is 17.9% higher than the current level (85.2GW). The plan aims to reduce the facility size and power generation ratio from nuclear and coal resources to even lower levels than today, and to rapidly expand power generation from new and renewable energy. Despite that, the proportion of coal power generation is still much higher than other resources, and it is expected that the reliance on goal will maintain for next several decades. Under such circumstances, the development, supply, and expansion of clean coal technology (CCT) that is eco-friendly and highly efficient, is crucial to minimize the emission of pollutants such as carbon dioxide and fine dust, as well as maximize the energy efficiency. The Korean government designated the Yong-Dong Thermoelectric Power Plant in Gangneung to develop clean coal power generation, and executed related projects for three years. The current study aims to suggest a plan to develop parts, technologies, testing, evaluation, certification, and commercialization efforts for coal-fired power generation, In addition, the study proposes a strategy to vitalize local economy and connect the development with creation of more jobs.