• 대한수학회지
• /
• 제47권4호
• /
• pp.861-877
• /
• 2010

The works of Erd$\ddot{o}$s et al. about expansions of 1 with respect to a non-integer base q, referred to as q-expansions, are investigated to determine how far they continue to hold when the number 1 is replaced by a positive number x. It is found that most results about q-expansions for real numbers greater than or equal to 1 are in somewhat opposite direction to those for real numbers less than or equal to 1. The situation when a real number has a unique q-expansion, and when it has exactly two q-expansions are studied. The smallest base number q yielding a unique q-expansion is determined and a particular sequence is shown, in certain sense, to be the smallest sequence whose corresponding base number q yields exactly two q-expansions.

• 한국식생활문화학회지
• /
• 제26권3호
• /
• pp.279-282
• /
• 2011

We evaluated the sensory characteristics of Gangjung base obtained from various manufacturers, using a sensory descriptive analysis. Significant differences were observed for all sensory attributes of Gangjung samples with the exception of 'toothpacking'. Sample A showed high intensities for 'external color', 'external roughness', 'sweetness', 'toasted soybean powder flavor', 'crispness', 'fracturability', 'oiliness', and 'loose particles,' whereas it had low intensities for 'rice flour flavor', 'hardness', and 'toughness' compared to those of other samples. Sample B had more 'sourness', 'butyric acid flavor', 'fermented rice flavor', and 'degree of melting' but lower 'air cell size', 'fracturability', and 'flake roughness'. Sample C showed high intensities for 'expansion', 'hardness', 'crispness', and 'flake roughness', whereas sample D showed low intensities for 'expansion' and 'sourness'. These results indicate that Gangjung base samples are markedly different depending on the manufacturer.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.42-49
• /
• 2006

In this research. the diesel cycle was thermodynamically interpreted to evaluate the possibility of high efficiency by converting diesel engines to the high expansion diesel cycle, and general cycle features were analyzed after comparing these two cycles. Based on these analyses. an experimental single cylinder a long stroke with high expansion-diesel engine. of which S/B ratio was more than 3, was manufactured. After evaluating the base engine through basic experiments, a diesel engine was converted into the high expansion diesel engine by establish VCR device and VVT system Accordingly, the high expansion diesel cycle can be implemented when the quantity of intake air is compensated by supercharge and the effective compression ratio is maintained at its initial level through the reduction of the clearance volume. In this case, heat efficiency increased by $5.0\%$ at the same expansion-compression ratio when the apparent compression ratio was 20 and the fuel cut off ratio was 2. As explained above, when the atkinson cycle was used for diesel cycle, heat efficiency was improved. In order to realize high expansion through retarding the intake value closing time, the engine needs to be equipped with variable valve timing equipment, variable compression ratio equipment and supercharged pressure equipment. Then a high expansion diesel cycle engine is realized.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.236-245
• /
• 2002

The acrylic resin was first introduced as denture base materials in 1937 and it is commonly used for denture base fabrication nowadays. Three different curing cycles (Conventional curing cycle, short curing cycle and long curing cycle) and three commercially available heat-activated acrylic resins (Vertex RS, Lucitone 199 and ProBase Hot) were investigated to find the curing cycle and material that showed the minimum shrinkage of the resin during polymerization process. A brass master mold was fabricated and duplicated by additional silicone impression material. Stone molds were made by pouring of type III dental stone (SILKY-ROCK YELLOW, Whip-Mix, Louisville, Kentucky). It was embedded in the flask. Strain gauge and thermocouple were embedded in the specimen. Strain gauge and thermocouple were connected to signal conditioning amplifier and data was recorded by pre-programmed software. The parameters ESmax (Maximum expansion strain), Sb (Strain measured just before deflasking procedure), Sa (Strain measured just after deflasking procedure) and Sf (Strain measured at the end of the experiment) were measured. ${\Delta}$S was calculated from Sb and Sa (${\Delta}$S=Sb-Sa). In the experiment concerned about materials, the parameters 90-ESmax (Maximum expansion strain measured during early 90 minutes of curing procedure), 180-ESmax (Maximum expansion strain measured from 90 minutes to 180 minutes), Sb, Sa, ${\Delta}$S and Sf were measured and the following conclusions were made. 1. The ESmax value of conventional curing cycle showed the largest value and the 180-ESmax value of Lucitone 199 showed the smallest value. 90-ESmax values showed no significant difference (p<0.05). 2. ${\Delta}$S values of conventional curing cycle showed the positive values. ${\Delta}$S values of short curing cycle and long curing cycle showed the negative values. All three materials cured by conventional curing cycle showed the positive values. 3. The Sf values of long curing cycle and ProBase Hot (cured by conventional curing cycle) showed the smallest values.

• 한국정보통신학회논문지
• /
• 제22권1호
• /
• pp.183-189
• /
• 2018

본 논문은 제한된 백홀 용량으로 발생하는 소형셀 네트워크에서의 트래픽 병목현상을 완화하기 위한 분산 파일저장 기술과 커버리지 확장 기술을 제안하였다. 제안 기법은 한정된 메모리 용량으로 백홀 망의 부하를 최소화하기 위해 파일의 인기도와 기지국의 메모리 용량에 따라 기지국의 커버리지와 파일 저장방법을 결정한다. 즉, 메모리 공간이 작거나 이용자들로부터 요청되는 파일이 다양할 경우 개별 기지국에 저장된 파일로 이용자를 서비스할 수 있는 확률이 낮아지므로 커버리지를 확장하고 기지국 사이 저장 파일의 중복을 줄여 커버리지 중첩지역에 있는 이용자가 다수의 기지국에 저장된 다양한 파일로 서비스 받을 수 있게 한다. 시뮬레이션을 통한 기존 배타적인 커버리지를 갖는 소형셀 네트워크에서의 파일저장 기법과의 전송용량 비교를 통해 제안 기법이 메모리 공간이 작거나 이용자들로 부터 요청되는 파일이 다양한 상황에서 높은 성능 이득을 가짐을 보였다.

• 정보보호학회논문지
• /
• 제15권3호
• /
• pp.65-76
• /
• 2005

EC-DSA나 EC-ElGamal과 같은 타원곡선 암호시스템의 성능 향상을 위해서는 타원곡선 상수배 연산을 빠르게 하는 것이 필수적이다. 타원곡선 특유의 Frobenius 사상을 이용한 $base-{\phi}$ 전개 방식은 Koblitz에 의해 처음 제안되었으며, Kobayashi 등은 최적확장체 위에서 정의되는 타원곡선에 적용할 수 있도록 $base-{\phi}$ 전개 방식을 개선하였다. 그러나 Kobayashi 등의 방법은 여전히 개선의 여지가 남아있다. 본 논문에서는 최적확장체에서 정의되는 타원곡선상에서 효율적인 상수배 연산 알고리즘을 제안한다. 제안한 상수배 알고리즘은 Frobenius사상을 이용하여 상수 값을 Horner의 방법으로 $base-{\phi}$ 전개하고, 이 전개된 수식을 최적화된 일괄처리 기법을 적용하여 연산한다. 제안한 알고리즘을 적용할 경우, Kobayashi 등이 제안한 상수배 알고리즘보다 $20\%{\sim}40\%$ 정도의 속도 개선이 있으며, 기존의 이진 방법에 비해 3배 이상 빠른 성능을 보인다.

• Journal of Electrical Engineering and Technology
• /
• 제7권4호
• /
• pp.468-479
• /
• 2012

In this paper, by a simple example it is shown that existing market-based criteria alone cannot completely and correctly evaluate the transmission network expansion from market view. However criteria congestion cost (CC) and social welfare (SW) together are able to correctly evaluate transmission network from market view and so they are adopted for the market-based transmission expansion planning. To simply indicate the limits of CC and SW social welfare percentage (SWP) and congestion cost percentage (CCP) are defined. To consider uncertainty in bids of market producers and consumers, and also indeterminacy in the acceptable boundaries of the SWP and CCP and their priorities, fuzzy assessment approach is used. In this approach, appropriate fuzzy sets and a fuzzy rule base are provided to evaluate the acceptability of an expansion plan. Then, the least-investment cost plan, which is acceptable in all probable scenarios, is searched. The proposed method is applied to an 8-bus system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.80-82
• /
• 1996

This paper deals with the effects of the volume of thermal expansion chamber on the interrupting performance in thermal expansion type 25.8kV 25kA gas circuit breaker. Model interrupters with 5 type thermal expansion chamber were designed and manufactured. Short-circuit tests were carried out for those model interrupters with 25kA breaking current. Pressure rise in the expansion chamber were measured and compared with the calculated one which was obtained from a self-developed program in our team. The analysis on the interrupting performance of each model interrupter has been done on the base of the short-circuit test results.

• 한국연초학회지
• /
• 제21권2호
• /
• pp.144-151
• /
• 1999

This study was carried out to compare the change physico-chemical properties in the 10 grades of Burley leaf tobacco expanded by $CO_2$. The filling capacity of AB3T was increased from 5.44cc/g to 9.52cc/g with the expansion rate 75.0% and that of CD3W was increased from 5.57cc/g to 10.16cc/g with the expansion rate 82.4%. But the rate of cut tobacco longer than 3.36 mm decreased from 77.2% to 49.9% and from 67.3% to 41.2% in grade B1T and C1W, respectively. The contents of nicotine and total volatile base in the of expanded cut tobacco decreased 11.9% and 10.4% respectively. The contents of onganic acids, except oxalic and palmitic acid, essential oil, amino acids, nicotine, tar and ammonia contents in the cigarette smoke decreased by expansion procecs. These results suggest that expanded tobacco was very useful to make less irritative cigarettes.

• 한국IT서비스학회지
• /
• 제7권2호
• /
• pp.181-195
• /
• 2008

The rapid growth of mobile communication technology has provided the expansion of mobile internet services, particularly mobile realtime transaction takes much weight among mobile fields. There is an increasing demand for various mobile applications to process transactions in a mobile computing fields. Thus, During transmission in wireless networks a base station failure inevitably causes data loss of the base station buffer. It is required to compensate the loss for communication. The existing methods for a base station failure are not adequate because they all suffer from too much overhead and resolve only the link failure. In this paper, we study an efficient recovry systems for a mobile DBMS. We propose SLL (Segment Log List) that enables the mobile host to compensate data loss efficiently in the case of base station failure. In SLL, a base station deliveries an output information of data cells to a mobile host. when a base station fails, the mobile host can retransmit just next data cells. We also prove the efficiency of new method.