• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.92-96
• /
• 1997

Recently, the life cycle of products is rapidly shortened and then the disposal of the used mold applied in development of the product is a difficult thing. In this study, we proposed the feasibility of new 3plate type mold base for recycling by analyzing of the existing standard mold base. And in order to apply new 3plate mold base in mold design and making, we constructed the specifications for parts such as runner stripper plate, cavity plate, core plate and slide core unit. Also, we confirmed the possibility of recycling mold base by testing a used 3plate mold for a Audio front pannel.

• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.37-45
• /
• 1990

In this paper, a knowledge base editor is presented as a supporting environment for an expert system building tool, OPS5. The knowledge base editor is especially useful for the fast and easy development of a knowledge base when the OPS5 production language is used. This knowledge base editor has some special facilities such as syntax and type checking, rule browsing and automatic bokkeeping. The syntax and type checking provides the facilities to find syntax and type errors in an edited knowledge base, respectively. The rule browsing facility offers various pattern matching schemes to see the causes and effects of a concerned rule. Automatic bookkeeping keeps the updated date and user name of a rule for the later reference whenever a user adds or changes a rule.

• Steel and Composite Structures
• /
• 제44권1호
• /
• pp.1-15
• /
• 2022

The weld quality has always been an important factor affecting the development of exposed CFT column-base joint. In this paper, a new type of exposed RCFST column-base joint is proposed, in which the high strength steel bars (USD 685) are set through the column and reinforced concrete foundation without any base plate and anchor bolts. Three specimens, the varying axial force ratio (0, 0.25 and 0.5), were tested under cyclic loadings. In addition, the bending moment capacity, energy dissipation capacity and deformation capacity of column-base joints were clarified. The experimental results indicated that the axial force ratio increases the stiffness and the bending moment and improves the energy dissipation capacity of column-base joints. This is because a large axial force can limit the slip between steel tubular and infilled concrete effectively. The specimens show stable hysteresis behavior.

• 열처리공학회지
• /
• 제20권1호
• /
• pp.17-21
• /
• 2007

In this study, brazing characteristics of the dissimilar Ti and Cu metals using a Zr-base amorphous filler ($Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10.0}Be_{22.5}$ in at.%) have been investigated for various bonding temperatures. In the sample brazed at $790^{\circ}C$ for 10 min., the Ti-rich phases in the joint were observed, while the Cu-rich phases were obtained in the sample brazed at $825^{\circ}C$ for 10 min.. Such a different microstructure and composition in the joints could be explained by the degree of the dissolution reaction. At $790^{\circ}C$, the reaction between the Zr-rich liquid phase and the Ti base metal was actively occurred to form Ti-rich liquid phase in the joint. As the temperature increased to $825^{\circ}C$, however, the reaction between the Ti-rich liquid phase and the Cu base metal was promoted to form the Cu-rich liquid phase in the joint finally. Such a different interface reaction is attributed to the reactivity or solubility between the Zr as a main element in the filler and the Ti and Cu as a base metal element.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.53-64
• /
• 1995

A study was made to characterize the microstructures and mechanical properties of the base metal and the heat-affected zone(HAZ) in Cu-bearing HSLA-100 steel. The Gleeble thermal/mechanical simulator was used to simulated the weld HAZ. The relationship between microstructure and toughness of HAZ was studied by impact test, O. M, SEM, TEM, and DSC. The toughness requirement of military specification value was met in all test temperatures for the base metal. The decrease of HAZ toughness comparing to base plate is ascribed to the coarsed-grain and the formation of bainite. Obliquely sectioned Charpy specimens show that secondary crack propagate easily along bainite lath. Improved toughness(240J) at HAZ of $Tp_2=950^{\circ}C$ is due to the fine grain, and reasonable toughness(160~00J) in the intercritical reheated HZA is achieved by the addition of small amount of carbon which affects the formation of "M-A". Cu precipitated during ageing for increasing the strength of base metal is dissolved during single thermal cycle to $1,350^{\circ}C$ and is precipitated little on cooling and heating during subsequent weld thermal cycle. Thus, the decrease of toughness does not occur owing to the precipitation of Cu.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.23-30
• /
• 2019

In this study, we evaluated the applicability of proper embedded depth of fillings by examining the uplift resistance using spiral foundation and top base foundation. As a result of the model test, the maximum uplift resistance increased with the embedded depth. The maximum uplift resistance of each region was found to be 50cm depth. The spiral foundation was 335.14N of Sancheong, 312.32N of Seongju, 403.94N of Wanju, and the top base foundation was 745.06N of Sancheong, 1028.82N of Seongju and 950.76N of Wanju. The yield point after the elastic section in the stress-displacement graph of the top base foundation was calculated as the maximum uplift resistance. For this reason, farmers do not actually use top bases foundation. Therefore, it was considered that the additional load increase due to slip connector will not occur. Model test results show that the maximum uplift resistance increases with the purlinss installed under the ground. Therefore, additional comparative studies through purlins installation will be needed.

• 디지털콘텐츠학회 논문지
• /
• 제3권2호
• /
• pp.245-254
• /
• 2002

현재, 자동화 시스템을 위한 통신분야는 TCP/IP를 기반으로 하는 네트워크 기반 원격제어 부분과 시스템의 각 내부 장치들간의 통신을 위한 간단한 직렬통신으로 나뉠 수 있다. 네트워크의 비약적인 발전에도 불구하고 내부 제어를 위한 통신부분은 현재까지 간단한 RS232기반을 사용하고 있다. 또한, 시스템의 개발기법은 각 기능단위의 모듈러 프로그래밍 기법에서 객체지향 프로그램으로 발전하였으며, 현재는 소프트웨어의 부품단위인 컴포넌트 기반 개발기법으로 발전하였다. 이는, 비즈니스 로직을 포함하는 독립적인 운영단위를 조립하며 새로운 시스템의 개발로 이어지는 기법으로서 소프트웨어 개발기법의 새로운 대안으로 제시되고 있다. 따라서, 본 연구는 컴포넌트 기반의 개발 기법을 적용한 GUI기반의 RS232C에서의 내부통신 Emulate를 구현하였다. 이는, 수신부와 송신부로 나뉘어지는 통신 제어부분을 컴포넌트화 하였으며, 이를 합성함으로서 제어부에서는 송,수신 데이터의 핸들링을 담당하도록 하였다.

• 한국콘텐츠학회논문지
• /
• 제15권9호
• /
• pp.639-651
• /
• 2015

본 연구는 지식기반과 메타기억이 범주 예 생성 과제를 통해 측정되는 개념적 암묵적 기억에 영향을 미치는 지를 살펴보는데 목적이 있다. 본 연구의 대상은 서울과 경기도의 초등학교 2학년 60명, 초등학생 6학년 60명, 고등학생 60명, 총 180명이었다. 대상 아동들에게 범주예 생성 암묵적 기억검사, 지식기반검사, 메타기억검사를 시행하였다. 수집된 자료는 공변량 분석을 실시하였고, Scheffe 사후검증을 실시하였다. 연구결과 첫째, 연령이 높을수록 암묵적 기억이 발달하였다. 암묵적 기억량은 초등학교 2학년과 고등학생, 초등학교 6학년과 고등학생 간에 유의하게 차이가 나타났다. 둘째, 아동의 지식기반수준이 높을수록 암묵적 기억이 발달하였다. 연령과 지식기반의 유의한 차이가 나타났다. 셋째, 아동의 메타기억이 높을수록 암묵적 기억이 발달하였다. 본 연구결과들로 연령, 지식기반, 그리고 메타기억이 암묵적 기억의 발달에 중요한 요인이라는 것을 알 수 있었다. 그리고 아동이 연령에 따라 지식기반과 메타기억이 발달한다면 암묵적 기억이 발달할 것이라는 시사점을 제공한다.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.1077-1099
• /
• 2016

One of the main shortcomings in the current passive base isolation system is lack of adaptability. The recent research and development of a novel adaptive seismic isolator based on magnetorheological elastomer (MRE) material has created an opportunity to add adaptability to base isolation systems for civil structures. The new MRE based base isolator is able to significantly alter its shear modulus or lateral stiffness with the applied magnetic field or electric current, which makes it a competitive candidate to develop an adaptive base isolation system. This paper aims at exploring suitable control algorithms for such adaptive base isolation system by developing a close-loop semi-active control system for a building structure equipped with MRE base isolators. The MRE base isolator is simulated by a numerical model derived from experimental characterization based on the Bouc-Wen Model, which is able to describe the force-displacement response of the device accurately. The parameters of Bouc-Wen Model such as the stiffness and the damping coefficients are described as functions of the applied current. The state-space model is built by analyzing the dynamic property of the structure embedded with MRE base isolators. A Lyapunov-based controller is designed to adaptively vary the current applied to MRE base isolator to suppress the quake-induced vibrations. The proposed control method is applied to a widely used benchmark base-isolated structure by numerical simulation. The performance of the adaptive base isolation system was evaluated through comparison with optimal passive base isolation system and a passive base isolation system with optimized base shear. It is concluded that the adaptive base isolation system with proposed Lyapunov-based semi-active control surpasses the performance of other two passive systems in protecting the civil structures under seismic events.

• 아동학회지
• /
• 제21권3호
• /
• pp.41-51
• /
• 2000

This study discusses the interpretation and application of a post modern perspective to child development knowledge and early childhood teacher education. The survey of literature focused on the post modern approach to child development knowledge and early childhood teacher education, research in the reassessment of child development knowledge as it is challenged by the post modern perspective, and deconstruction of both child development knowledge and early childhood teacher education. It was concluded that child development knowledge is necessary but insufficient to early childhood teacher education. In the post modern perspective, the movement toward fostering "reflective practitioners" and basic knowledge base is more significant. Therefore, the responsibility of academics is to walk the fine line between presenting a formal knowledge base so that students gain assumption to guide their thinking and practice, critiquing both theory and derived practices.