• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2298-2304
• /
• 2015

In this paper, we provide a new approach which optimizes the vertical tilting angle of the base station for multi-cell multiple-input single-output (MISO) downlink active antenna systems (AAS). Instead of the conventional optimal algorithm which requires an exhaustive search, we propose simple and near optimal algorithms. First, we represent a large system approximation based vertical beamforming algorithm which is applied to the average sum rate by using the random matrix theory. Next, we suggest a signal-to-leakage-and-noise ratio (SLNR) based vertical beamforming algorithm which simplifies the optimization problem considerably. In the simulation results, we demonstrate that the performance of the proposed algorithms is near close to the exhaustive search algorithm with substantially reduced complexity.

• Korean Journal of Materials Research
• /
• v.26 no.5
• /
• pp.235-240
• /
• 2016

Appropriate thermo-mechanical properties of nickel-based superalloys are achieved by heat treatment, which induces precipitation and solid solution hardening; thus, information on the temperature ranges of precipitation and dissolution of the precipitates is essential for the determination of the heat treatment condition. In this study, thermal analyses of nickel-based superalloys were performed by differential scanning calorimetry method under conditions of various heating rates of 5, 10, 20, or 40K/min in a temperature range of 298~1573K. Precipitation and dissolution temperatures were determined by measuring peak temperatures, constructing trend lines, and extrapolating those lines to the zero heating rate to find the exact temperature under isothermal condition. Determined temperatures for the precipitation reactions were 813, 952, and 1062K. Determined onset, peak, and offset temperatures of the first dissolution reaction were 1302, 1388, and 1406K, respectively, and those values of the second dissolution reaction were 1405, 1414, and 1462K. Determined solvus temperature was 1462K. The study showed that it was possible to use a simple method to obtain accurate phase transition temperatures under isothermal condition.

• The Plant Pathology Journal
• /
• v.24 no.4
• /
• pp.384-391
• /
• 2008

Rice blast disease, caused by the pathogenic fungus Magnaporthe grisea, is a serious issue in rice (Oryza sativa L.) growing regions of the world. Transcript profiling in rice inoculated with the fungus has been investigated using the transcriptomics technology, serial analysis of gene expression (SAGE). Short sequence tags containing sufficient information which are ten base-pairs representing the unique transcripts were identified by SAGE technology. We identified a total of 910 tag sequences via the GenBank database, and the resulting genes were shown to be up-regulated in all functional categories under the fungal biotic stress. Compared to the compatible interaction, the stress and defense genes in the incompatible interaction appear to be more up-regulated. Particularly, thaumatin-like gene (TLP) was investigated in determining the gene and protein expression level utilizing Northern and Western blotting analyses, resulting in an increase in both the gene and the protein expression level which arose earlier in the incompatible interaction than in the compatible interaction.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.675-687
• /
• 2017

In the aerospace industry, we have produced various models according to operational conditions and the environment after development of the base model is completed. Therefore, when design change is necessary, there are modification and updating costs of the circuit whenever environment variables change. For these reasons, recently, in various fields, system designs that can flexibly respond to changing environmental conditions using field programmable gate arrays (FPGAs) are attracting attention, and the rapidly changing aerospace industry also uses FPGAs to organize the system environment. In this paper, we design the controller area network (CAN) intellectual property (IP) protocol used instead of the avionics protocol that includes ARINC-429 and MIL-STD-1553, which are not suitable for small unmanned aerial vehicle (UAV) systems at the register transistor logic (RTL) level, which does not depend on the FPGA vender, and we verify the performance. Consequentially, a Spartan 6 FPGA model-based system on chip (SoC) including an embedded system is constructed by using the designed CAN communications IP and Xilinx Microblaze, and the configured SoC only recorded an average 32% logic element usage rate in the Spartan 6 FPGA model.

• Journal of architectural history
• /
• v.20 no.5
• /
• pp.47-61
• /
• 2011

This study examined the background and change of building Yeongam eupseong and characteristics and construction method of its spatial structure. The results of this study can be summarized as follows. First, Yeongam eupseong was built for the same purpose of national border defense against the invasion of Japanese army as other Eupseongs were built and it was found first in the literature in the era of King Munjong of Joseon Dynasty with the scale of three gates and 4,369 cheok of castle wall. Such a scale was continued and in particular, according to flat structure, road network and gate position shown in the map, the form and road system of Yeongam eupseong before the 19th century were mostly identical with the current ones. Second, castle wall was built over foundation by using talcum after leveling the foundation soil and castle wall can be divided into outer wall, filling part and inner wall from the section. Outer wall was constructed by inserting and layering pebbles with big irregular stone, filling part was made with talcum and riprap and inner wall with soil in several layers by keeping gradient. This building method showed common features in inserting and layering pebbles for outer wall, use of protruded base and section form compared to Jeollado Eupseong.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.94-99
• /
• 2006

As part of a Department of Defense Grand Challenge Project, advanced high performance computing (HPC) time-accurate computational fluid dynamics (CFD) techniques have been developed and applied to a new area of aerodynamic research on microjets for control of small and medium caliber projectiles. This paper describes a computational study undertaken to determine the aerodynamic effect of flow control in the afterbody regions of spin-stabilyzed projectiles at subsonic and low transonic speeds using an advanced scalable unstructured flow solver in various parallel computers such as the IBM SP4 and Linux Cluster. High efficiency is achieved for both steady and time-accurate unsteady flow field simulations using advanced scalable Navier-Stokes computational techniques. Results relating to the code's portability and its performance on the Linux clusters are also addressed. Numerical simulations with the unsteady microjets show the jets to substantially alter the flow field both near the jet and the base region of the projectile that in turn affects the forces and moments even at zero degree angle of attack. The results have shown the potential of HPC CFD simulations on parallel machines to provide to provide insight into the jet interaction flow fields leading to improve designs.

• Journal of Korean Society of societal Security
• /
• v.2 no.3
• /
• pp.67-72
• /
• 2009

The occurrence of disaster lately is coming with the more complex form and increasing the necessity of National Infrastructures Protection Plan(NIPP). International and domestic laws and systems related to critical infrastructures were investigated. The program in which the classification of national critical infrastructures was expanded eight fields to thirteen fields including emergency services, large gathering sites, defense industrial base, and national monuments was presented in this study. The plan for integrating national critical infrastructures, national important infrastructures and national security infrastructures and a NIPP framework were proposed.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.155-160
• /
• 2003

Plasma spraying technique was used to fabricate functionally graded coating (FGC) of NiCrAIY/YSZ 8wt%$Y_2O_3-ZrO_2$ on a Co-base superalloy (HAYNES 188) substrate. Six layers were coated on the substrate for building up compositionally graded architecture. Conventional thermal barrier coating (TBC) of NiCrAIY/SZ with sharp interface was also fabricated. As-coated FGC and TBC samples were exposed at the temperature of $1100^{\circ}C$ for 10, 50, 100 hours in air. Microstructural change of thermally exposed samples was examined. Pores and microcracks were formed in YSZ layer due to evolution of thermal internal stress at high temperature. The amount of pores and microcracks in YSZ layer were increased with increasing exposure time at high temperature. High temperature oxidation of coatings occurred mainly at the NiCrAIY/YSZ interface. In comparison with the case of TBC. the increased area of the NiCrAIY/YSZ interface in FGC is likely to attribute to forming the higher amount of oxides.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.60-65
• /
• 2009

A highly reliable Video Transmission System (VTS) was developed in order to obtain both video and digital data simultaneously in the real time flight test situation of a flying vehicle. The VTS integrates GPS date digital telemetry data and video signals into a compact digital data package which is compressed and processed by an MPEG-2 Encoder and a modulator respectively. The modulator is composed of a specially devised Forward Error Correction processor and base band QPSK modulator. The designed VTS was verified and proved for its required functioning and performance through separate flight tests using an airplane and Rockets.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.14-21
• /
• 2007

Sight Stabilization system is the control system to preserve Line of Sight for the targets though many nonlinear disturbances and vibrations are generated. In this paper, we identified Stabilization system using RLS algorithm, one of the system identification algorithm and found out the modeling of system. Considering nonlinear operational condition this paper proposes two Knowledge-base controllers - Fuzzy controller, Fuzzy PI Gain Scheduling controller, and simulates the performances of proposed controllers compare with Lead PI controller being used in Sight system of NFIV.