• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2016년도 하계학술대회
• /
• pp.260-263
• /
• 2016

Recently high dynamic range imaging technique is hot issue in computer graphic area. We present a progressive tone mapping algorithm, which is based on weighted least squares optimization framework. Our approach combines weighted leastsquaresfiltering with iCAM06, for showing more perceptual high dynamic range images in conventional display, while avoiding visual halo artifacts. We decompose high dynamic range image into base layer and detail layer. The base layer has large scale variation, it is obtained by using weighted least squares filtering, and then the base layer incorporates iCAM06 model. Then, adaptive compression on the base layer according to human visual system. Only the base layer reduces contrast, and preserving detail. The resultshows more perceptual color appearance and preserve fine detail, while avoiding common artifacts.

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.82-87
• /
• 2001

The creep-rupture and low cycle fatigue properties of transient liquid phase bonded joints of Ni-base single crystal superalloy, CMSX-2 was investigated using MBF-80 insert metal. The (100) orientation of bonded specimen was aligned perpendicular to the joint interface. CMSX-2 was bonded at 1523K for 1.8ks in vacuum, optimum bonding condition. The creep rupture strength and rupture lives of the joints were the almost identical to ones of the base metal. SEM observation of the fracture surfaces of joints after creep rupture test revealed that the fracture surfaces classified three types of region, ductile fracture surface, cleavage fracture surface and interfacial fracture surface. The low cycle fatigue properties of the joints were also the same level as those of base metal. The elongation and reduction of area values of joints were comparable to those of base metal while fell down on creep rupture condition of high temperature.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.311-313
• /
• 2010

This study is on the adapting vehicle-based mobile mapping system to the frequent unscheduled revision of 1:5000 scale national base map. We analyzed map layers which could be built by vehicle-based mobile mapping systems and studied surveying methods for each layers. Also, the methods of maintain surveying accuracy to satisfy accuracy standards of national base map were suggested. The maps of Yeouido, Hyangnam, and Suwon area were revised by vehicle-based mobile mapping system on a trial bases and possibility of utilizing vehicle-based mobile mapping system for map revision was analyzed. As a results it was revealed that vehicle-based mobile mapping systems were adequate for a irregular revision of national base map.

• Spatial Information Research
• /
• 제18권5호
• /
• pp.55-61
• /
• 2010

본 연구는 남극과 같은 극한지에 대한 초분광영상의 활용방안 제시를 위해 시도되었다. 연구 대상 지역은 국내 남극 기지 후보지로 결정된 테라노바만 지역으로, 암반 위에 건설되는 기지의 특성상 기반암의 위치 및 안정도는 매우 중요한 분석인자라 할 수 있다. 현지 측정 자료의 경우, 상대적으로 좁은 지역에서 이루어지고 측정이 힘든 지역이 많아 후보지역의 전체적 특징을 측정하는 데는 한계가 있다. 이에 위성영상을 이용한 광역지역의 다양한 정보제공이 요구되어 진다. 본 연구에서는 초분광영상의 풍부한 분광정보를 이용하여 기반암 지역을 추출한 후 주요 암석종류에 대해 탐지 및 분류를 시도하였다. 이를 위해 국제적인 암석 분광라이브러리를 사용하였다. 탐지 결과, 초분광영상의 중적외선밴드가 암석 탐지에 매우 유용한 것으로 나타났으며, 주요 암석의 분포 정보를 산출할 수 있었다. 향후 연구에서는 충분한 현지 측정자료를 이용한 보다 정량적인 연구결과의 검증을 시도할 예정이다.

• Journal of Welding and Joining
• /
• 제27권3호
• /
• pp.73-79
• /
• 2009

This present paper investigated the mechanical properties and the microstructures of each penetration shapes classifying the conduction shape area and the keyhole shape area about electron beam welded 120(T)mm thick plated aluminum 5052 112H. As a result the penetration depth is increased linearly according to the output power, but the aspect ratio is decreased after the regular output power. In the conduction shape area, the Heat affected zone is observed relatively wider than the keyhole shape area. In the material front surface of the welded specimen, the width is decreased but the width in the material rear surface is increased. After the measuring the Micro Vikers Hardness, it showed almost similar hardness range in all parts, and after testing the tensile strength, the ultimate tensile strength is similar to the ultimate tensile strength of the base material in all the specimens, also the fracture point was generated in the base materials of all the samples. In the result of the impact test, impact absorbed energy of the Keyhole shape area is turned up very high, and also shown up the effect about four times of fracture toughness comparing the base material. In the last result of observing the fractographs, typical ductile fraction is shown in each weld metal, and in the basic material, the dimple fraction is shown. The weld metals are shown that there are no other developments of any new chemical compound during the fastness melting and solidification.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1883-1890
• /
• 1999

도심지 무선통신에서 전파전파 특성(Wave Propagation Characteristics)을 정확하게 예측하는 것은 통신 서비스 영역 결정이나 최적의 기지국 선정 및 셀 설계 등을 위해 매우 중요하다. 도심지역에서 건물 차폐영역 특성을 이용한 전파예측 모델(Propagation Prediction Model)로 CCIR모델이 있다. 이 모델은 기지국과 이동국간의 차폐 영향을 직선평면형태에서의 건물 차폐율로 나타내고 있다. 그러나 건물이 밀집되어 있는 지역이나 가시선상에 구릉이나 산이 있는 지형여건을 고려하지 않았기 때문에 예측 오차가 많이 발생한다. 본 논문에서는 이러한 문제점을 개선하기 위한 전파예측모델을 제안하였다. 제안한 모델에서는 가시선상에서 가장 큰 영향을 미치는 거물차폐에 대한 블록수와 지형여건을 고려한 건물의 차폐높이에 대한 관계식을 통계 패키지 SAS(Statistical Analysis System)로 구하였다. 그리고 고밀도, 중밀도, 저밀도 지역에서 서비스 중인 무선통신 기지국의 전계레벨 수신세기를 실측한 후, 제안한 모델과 CCIR모델의 예측 결과를 비교 분석하였다. 실측치와 비교한 결과, CCIR모델보다 제안한 모델이 고밀도 지역에서 9.71dB, 중밀도 지역\ulcorner서 9.66dB, 저밀도 지역에서 4.02dB 개선되었다.

• Journal of Mechanical Science and Technology
• /
• 제18권4호
• /
• pp.640-648
• /
• 2004

This paper describes a new magnetization method for non-destructive testing with magneto-optical sensor (denoted as MO sensor) which have the following characteristic : high observation sensitivity, independence of the crack orientation, and precise imaging of a complex crack geometry such as multiple cracks. When a magnetic field is applied normally to the surface of a specimen which is significantly larger than its defects, approximately the same magnetic charge per unit area occurs on the surface of the specimen. If there is a crack in the specimen, magnetic charge per unit area has the same value at the bottom of the crack. The distribution of the vertical component of the magnetic flux density, B$\_$Z/, is almost uniform over the no-crack area (denoted as B$\_$Z,BASE/), while the magnetic flux density is smaller in the surroundings of the crack(denoted as B$\_$Z,CRACK/) If B$\_$Z, BASE/ is a bit larger than the saturated magnetic flux density of the MO sensor (B$\_$s/) , then small magnetic domains occur over the crack area and a large domain over the non-crack area because B$\_$Z,CRACK/ is smaller than B$\_$s/.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.120-127
• /
• 1997

Depositional environment off the Shihwa Dam has been studied to investigate the change of sedimentation process and the pollution. In order to understand how the sediments are distributed, polluted and modified, depositional factors have been analyzed and compared with the previous data. Study area, located off the Shihwa Dam, was surveyed to collect 25 bottom samples and 2 cores in 1996 and echo-sounding in 1997. These sediments were analyzed for the study of the global characteristics of sediment such as grain size and organic matter. Among these samples, the selected twenty surface sediments were analyzed for the comparison with their contents of metallic elements (Al, Mn, Fe, V, Cr, Co, Ni, Cu, Zn, Cd, Pb, As). According to field and lab analysis of sediments, three sedimentological zones have been generally identified around study area; near the dam (sandy Silt), near the dike (Sand) and offshore (silty Sand) zones. Textural parameters show that the content of silt and clay is dominant near the dam excepting the dike zone of LNG Storage Base and offshore (Palmido). The total concentration of Mn, Ni, Fe, Zn and Cd in bulk sediments was increased after the construction of the dam, while the content of Mn and Cr were higher near tidal channel than in the offshore area. Meanwhile, the annual increasing pattern of some heavy metal has appeared in this area. Based on this primary study, modification of the depositional environment may be caused by the construction of the dam and LNG Storage Base. Additionally, environmental evaluation on organic/inorganic factors has been suggested for interpreting environmental changes caused by coastal development in the nearshore such as the Shihwa coastal area.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.468-471
• /
• 2015

The study aims to identify the degree and types of spatial decline in Eup/Myun units within Chungcheong region in South Korea to contribute to the efforts being made to diagnose the rural decline and the potentials. To this end, we analyzed 27 Sis and Guns to identify the degree of decline and potentials of rural areas in Chungcheong region. We also carried out the diagnosis and K-Means Clustering on 274 Eups and Myuns, the smallest administrative units, to figure out the types and characteristics of the rural recessions. According to the results of the clustering analysis carried out on the 166 Eups and Myuns, there were five outstanding clusters. They were; areas with housing deterioration (29), areas with poor economic foundation (16), areas with poor accessibility to central areas (42), areas with poor residential environment (51) and areas with aged population (28). The findings and results of the present study are likely to serve as a basis for the design and enforcement of forthcoming rural area activation policies. Also, it would be highly recommended that a more comprehensive diagnosis is taken from a community-level perspective and policy suggestions and strategies tailored for rural communities are further discussed.

• 교육시설 논문지
• /
• 제19권1호
• /
• pp.13-24
• /
• 2012

Recently, many middle and high schools are remodeling the buildings and facilities based on departmental system. This study, through analyzing on 10 remodeling cases of high school, is showing the variation before and after remodeling, space organization types, and the types of school management. This also gives us the information on the number of classrooms and teachers' rooms for each subject, the area and number of home base, and the current state of all these facilities. Furthermore, this study is comparing and analyzing the rate of use of specialized classrooms to the type of management. Through this analysis, we reach the following conclusions. l. However all the cases remodeled their buildings to implement departmental system, the methods of space composition, the numbers of the classrooms, and the status of home base are in various forms. 2. Taken as a whole, there are only few spaces used by departmental system. 3. The spaces for practical subjects such as Science and Art are inadequate than the ones for major subjects such as Languages and Mathematics. 4. A system to assign a room for a teacher records the lowest space usage rate. 5. The area of home base per one student is only $0.48m^2$, and even the area is mostly filled with lockers. The present condition of the 10 high schools which we surveyed shortly after remodeled shows that departmental system is not firmly settled down yet.