• Journal of the Korean Magnetics Society
• /
• 제13권2호
• /
• pp.47-52
• /
• 2003

Ferromagnetic tunnel junctions were fabricated by dc magnetron sputtering and plasma oxidation process. The local transport properties of the ferromagnetic tunnel junctions were studied using contact-mode Atomic Force Microscopy (AFM) and the local current-voltage analysis. Tunnel junctions with the structure of sub./Ta/Cu/Ta/NiFe/Cu/Mn$\_$75/Ir$\_$25//Co$\_$70/Fe$\_$30//Al-oxide were prepared on thermally oxidized Si wafers. Al-oxide layers were formed with microwave excited plasma using radial line slot antenna (RLSA) for 5 and 7 sec. Kr gas was used as the inert gas mixed with $O_2$ gas for the plasma oxidization. No correlation between topography and current image was observed while they were measured simultaneously. The local current distribution was well identified with the distribution of local barrier height. Assuming the gaussian distribution of the local barrier height, the ferromagnetic tunnel junction with longer oxidation time was well fitted with the experimental results. As contrast, in the case of the shorter time oxidation junction, the current mainly flow through the low barrier height area for its insufficient oxygen. Such leakage current might result in the decrease of tunnel magnetoresistance (TMR) ratio.

• Journal of The Korea Institute of Healthcare Architecture
• /
• 제20권2호
• /
• pp.27-35
• /
• 2014

Purpose: The number of the transportation poor has been steadily increased, and also the social perspective toward the disabled has been changed. Thus, Universal Design has been needed. In particular, the unknown majority of the transportation poor have frequently used the urban railway facilities which should reflect the ideals and principles of Universal Design. However, previous research has not focused on the study on critical factors of Universal Design. Based on this observation, the present study aims to find out Universal Design critical factors of urban railway station. Methods: This study explores the criteria of planning Universal Design in the urban railway station by analyzing and comparing the similar criteria used in both domestic areas and foreign countries. Result: Findings from this study are as follows. First, we found out the critical factors of Universal Design in the urban railway station by comparing and analyzing the similar criteria previously used. Second, this study also suggests the better directions toward the domestic criteria relating to the urban railway system. Third, we found the need of the universal standard as well as individually corresponding strategy. Moreover, we found the need of preparing the critical factors for the physical environments as well as the human service. Implications: The further research on findings of the planning criteria will have been continued on the basis of findings of the present study.

• Animal Bioscience
• /
• 제35권6호
• /
• pp.858-868
• /
• 2022

Objective: This study was conducted to evaluate the effects of dietary yeast hydrolysate (YH) supplementation on intestinal morphology, barrier, and anti-inflammatory functions of broilers. Methods: A total of 320 one day old male broilers were randomly allocated into four groups with eight replicates of ten broilers each. The broilers were supplemented with a basal diet (the control group) or basal diets adding 50, 100, 150 mg/kg YH, respectively. This trial lasted for 42 days. The orthogonal polynomial contrasts were used to determine the linear and quadratic effects of increasing levels of YH. Results: In our previous research, supplementing YH improved growth performance by enhancing body weight gain but decreased feed-to-gain ratio. In this study, compared with the control group, dietary YH addition linearly and quadratically decreased serum diamine oxidase activity (p<0.05). Additionally, supplementing YH linearly and/or quadratically decreased jejunal crypt depth (CD), tumor necrosis factor-alpha (TNF-α) concentration as well as mucin 2, interleukin-6 (IL-6), IL-1β, TNF-α, nuclear factor kappa B, and myeloid differentiation factor 88 gene expression levels (p<0.05). Whereas the jejunal villus height (VH), VH/CD, IL-10 concentration as well as zonula occludens-1 and IL-10 gene expression levels were linearly and/or quadratically increased by YH supplementation (p<0.05). Conclusion: Dietary YH supplementation improved intestinal morphology, barrier and anti-inflammatory functions while decreased intestinal permeability of broilers, which might be related with altering pertinent genes expression. This study provides evidence of YH as a promising feed additive for broilers.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.221-224
• /
• 2002

To demonstrate prevention of the leachate leakage out of the landfill with creating inward hydraulic gradient, a tracer test and continuous waterlevel monitoring at the Inside and outside of the barrier wall of a costal landfill were peformed. When the tracers were injected into the well outside of the vertical wall system with high water level, then they were detected at the well inside of the system with low water level. Furthermore the lowered water level at the inside of the landfill than that at the outside prevented leachate leakage out of the landfill. This study reports results of the tracer test and waterlevel monitoring.

• Applied Science and Convergence Technology
• /
• 제23권3호
• /
• pp.128-133
• /
• 2014

We study the ballistic spin transport properties in a two-dimensional electron gas system in the presence of magnetic barriers using a transfer matrix method. We concentrate on the size-effect of the magnetic barriers parallel to a two-dimensional electron gas plane. We calculate the transmission probability of the ballistic spin transport in the magnetic barrier structure while varying the width of the magnetic barriers. It is shown that resonant tunneling oscillation is affected by the width and height of the magnetic barriers sensitively as well as by the inter-spacing of the barriers. We also consider the effect of additional electrostatic modulation on the top of the magnetic barriers, which could enhance the current spin polarization. Because all-semiconductor-based devices are free from the resistance mismatch problem, a resonant tunneling structure using the two-dimensional electron gas system with electric-magnetic modulation would play an important role in future spintronics applications. From the results here, we provide information on the physical parameters of a device to produce well-defined spin-polarized current.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제23권5호
• /
• pp.435-443
• /
• 2020

Thermal barrier coating(TBC) applied to fighter and turbine engines is a technology that improves the durability of core parts by lowering the surface temperature of base material. The thermal stress caused by mis-match of the coefficient of thermal expansion between the top coating and the TGO interface is the main cause of TBC breakage. Since the thermal stress is dependent on the microstructure of the TBC, designing microstructure of TBC can improve the durability as well as lower the thermal stress. In this study, the effect of coating thickness, volume of porosity and vertical cracking on the thermal stress was analyzed through finite element analysis. Through the analysis results, a design range of a microstructure that can improve the durability of thermal barrier coating by lowering thermal stress is proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1053-1056
• /
• 2007

The acoustical performance of noise reducing devices installed on the top of a noise barrier were tested by small-scale outdoor tests. Noise measurements before and after installation of the devices were carried out using sound intensity methods. It is well known that the sound intensity method can specify the strength and directivity of sound, and it is convenient to consider the feature of sound around a noise barrier. The noise reduction effect of each edge device was evaluated using the difference between the input and output sound power levels calculated from sound intensities. It was investigated that each device had different efficiency in the shadow zone, while there was no significant difference between edge devices in the illuminated zone.

• Environmental Analysis Health and Toxicology
• /
• 제24권4호
• /
• pp.351-357
• /
• 2009

To investigate the alleviative effects of jujube water extract (JWE) on the inflammation and skin barrier damage, both the irradiation of UVB and the application of squalene monohydroperoxide (Sq-OOH) were applied to the back skin of experimental animals for 4 weeks. And at the same time experimental materials were applied topically. Six weeks female SKH-1 hairless mice were divided into five groups (five animals for each group) including normal (N; saline), control (C; UVB+Sq-OOH+saline), vehicle control (VC; UVB+Sq-OOH+vehicle), positive control (PC; UVB+Sq-OOH+0.01% retinoic acid) and experimental (E; UVB+Sq-OOH+JWE) groups. The skin erythema index in the E group was significantly low compared to the C group (p<0.05). Lipid (p<0.05) and water (p<0.01) capacities in the E group were significantly high compared to the C group. In comparison with the C group, E group showed a relatively well preserved lipid lamellae in the epidermis and a relatively much less infiltration of mast cells in the dermis or hypodermis. As for the both absolute and relative weights of the spleen, PC group were significantly higher than the other groups. These results suggest that JWE have a considerably inhibitory effect on the inflammation and the skin barrier damage induced by UVB irradiation and Sq-OOH application.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1130-1135
• /
• 2003

The need to increase the reliability of a structural system has been significantly brought in the procedure of real designs to consider, for instance, the material properties or geometric dimensions that reveal a random or incompletely known nature. Reliability based design optimization of a real system now becomes an emerging technique to achieve reliability, robustness and safety of these problems. Finite element analysis program and the reliability analysis program are necessary to evaluate the responses and the probabilities of failure of the system, respectively. Moreover, integration of these programs is required during the procedure of reliability based design optimization. It is well known that reliability based design optimization can often have so many local minima that it cannot converge to the specified probability of failure. To overcome this problem, barrier function method in reliability based design optimization is suggested. To illustrate the proposed formulation, reliability based design optimization of a bracket is performed. AMV and FORM are employed for reliability analysis and their optimization results are compared based on the accuracy and efficiency.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.76-81
• /
• 2007

Threshold voltage ($V_{th}$) modeling of doublegate (DG) MOSFETs was performed, for the first time, by considering barrier lowering in the short channel devices. As the gate length of DG MOSFETs scales down, the overlapped charge-sharing length ($x_h$) in the channel which is related to the barrier lowering becomes very important. A fitting parameter ${\delta}_w$ was introduced semi-empirically with the fin body width and body doping concentration for higher accuracy. The $V_{th}$ model predicted well the $V_{th}$ behavior with fin body thickness, body doping concentration, and gate length. Our compact model makes an accurate $V_{th}$ prediction of DG devices with the gate length up to 20-nm.