Search | Korea Science

Park, Jong-Jin;Hwang, Han-Sub
- Proceedings of the KSME Conference
- /
- 2003.04a
- /
- pp.1136-1141
- /
- 2003
Among various methods to manufacture the PDP barrier ribs, the pressing and the roll forming methods are simple and economical because they form the ribs by utilizing the plastic flow of the green tape in a relatively short time without generating air-polluting dusts. In the present study, the roll forming method was investigated by experiments as well as numerical analyses and in result the groove roll and the preform were designed. The effect of draft angle, comer radius, and initial thickness of the green tape on the plastic flow was examined by a series of parametric studies. The preform was recommended to ease the plastic flow into the grooves and to avoid the occurrence of crack during rolling and sintering processes.
PDF

Lee, Y.J.;Lee, S.K.;Kim, W.J.;Kim, Y.D.;Kim, M.S.;Moon, S.J.;Kwon, Y.H.;Yoo, S.J.;Kim, J.D.
- 한국정보디스플레이학회:학술대회논문집
- /
- 2002.08a
- /
- pp.75-78
- /
- 2002
Difference in the structure of AC PDP cells makes the cells have various discharge characteristics. Therefore, a ramp-reset must be adjusted for the stable driving of AC PDP. If any ramp-reset can reduce the difference in discharge characteristics between cells, the conditions of the address discharge could become almost the same. It is very important to understand these to design a good driving waveform. In this paper, we proved the mentioned facts with the change of barrier rib heights.
PDF

Kim, Hyeong-Jun;Kim, Kibum;Kim, Jongcheol;Yoon, Kyung-Han;Shin, Dongwook
- Journal of Ceramic Processing Research
- /
- v.13 no.spc2
- /
- pp.241-245
- /
- 2012
The barrier rib on plasma display panel (PDP) is a typical 3D-patterned thick film with thickness of 120 ㎛ and it is hard to measure its dielectric constant in this state of the product. Because the porosity of ceramic thick film influenced the mechanical and dielectric characteristics, it was expected that there was the relationship between two properties. Therefore, the correlation analysis between porosity, hardness and dielectric constant of the barrier rib was studied and the exponential curve between porosity and hardness, and the quadratic curve between porosity and dielectric constant were drawn. The dielectric constant was well related to hardness by K400kHz = 0.5672 + 5.695 ln(Hv). The hardness was measured at five points on two real panels which sintered by two types of profiles and then dielectric constants and deviation were estimated by the above equation.
KSCI

Son, Jae-Hyeok;Im, Yong-Gwan;Jeong, Yeong-Dae;Jeong, Seong-Il;Jeong, Hae-Do
- Journal of the Korean Society for Precision Engineering
- /
- v.19 no.6
- /
- pp.176-183
- /
- 2002
Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper , Stripes of grooves of which width 48$\mu$m, depth 124$\mu$m , pitch 274$\mu$m was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6 nm Ra in grooving Si. Barrier ribs were farmed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waviness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.
PDF KSCI