• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1429-1431
• /
• 2005

Organic molecular-beam deposition of Mg:Ag thin films with a low Mg concentration on tris (8-hydroxyquinolino) aluminum $(Alq_3)$ layers at room temperature was performed to investigate the feasibility of using Mg:Ag thin films as cathode electrodes in organic light-emitting devices (OLEDs). The effective barrier height of the $Mg:Ag/Alq_3$ heterointerface, determined from current-voltage measurements, was as low as 0.23 eV. These results help improve understanding the electrical properties of the $Mg:Ag/Alq_3$ heterointerfaces in OLEDs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.133-136
• /
• 2004

In this study, the characteristics of 3C-SiC ohmic contact were investigated. Titanium-tungsten(TiW) films were used for contact metalization. The ohmic contact resistivity between 3C-SiC and TiW was measured by HP4155 and then calculated with the circular transmission line method(C-TLM). And also the physical properties of TiW and the interface between TiW and 3C-SiC were analyzed using XRD and AES. TiW films make a good role of a diffusion barrier and their contact properties with 3C-SiC are stable at high temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1562-1564
• /
• 1996

Langmuir-Blodgett (LB) method have been used by many rescarcher because of its facility to control the thickness of film as molecular order and orientation of molecular. We fabricated MIM device using copolymer LB films of $2C_{18}MA-VE_2$ and elecctrical conduction mechanism in ultra-thin LB film were investigated. In our experimental results, the maleate copolymer LB film have the properity of insulator like organic ultra-thin fiim. Its diclcctric constant was about 3.5 and its voltage generation about 0.1 Volt. And Schottky current was apeared as electrical conduction current and Schottky barrier was about 0.9(eV).

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.117-117
• /
• 2014

Thin $ZrO_2/Al_2O_3$ films were deposited on a tool steel substrate using Zr and Al cathodes in a cathodic arc plasma deposition system (CAPD), and then oxidized at $600-900^{\circ}C$ in air for up to 50 h. They effectively suppressed the oxidation of the substrate up to $800^{\circ}C$ by acting as a barrier layer against the outward diffusion of the substrate elements and inward diffusion of oxygen. However, rapid oxidation occurred at $900^{\circ}C$ due mainly to the increased diffusion and subsequent oxidation of steel as well as the crystallization of amorphous $Al_2O__3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.397-400
• /
• 1996

We investigated electric and dielectric properties of MIM device using Maleate Copolymer LB films. The thickness of maleate copolymer LB film by ellipsometry measurements and X-ray diffraction pattern was about 27~30[ ]. The maleate copolymer 13 film have the property of insulator like organic ultra-thin film. The electric conduction was Schottky current measured by I-V characteristics, and the conductivity was 10$^{-15}$ ~10$^{-14}$ [S/cm]. Dielectric constant was about 5.0~6.0 by various measurement: I-V, frequency-depenent dielectric properties. Schottky barrier was about 0.9 ~1.0(eV). By relation between log I and 1/T, activation energy baa 0.74(eV). Frequency-depenent dielectric properties wart orientational polarization by the dipole.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.147-152
• /
• 2002

Carbon nitride thin films were deposited by reactive sputtering for the hard coating materials on Si wafer and tool steels. When the nitrogen content of carbon nitride film on tool steel is 33.4%, the mean hardness and elastic modulus are 49.34 GPa and 307.2 GPa respectively. The nitrided or carburised surface acts as the diffusion barrier which shows better adhesion of carbon nitride thin film on the steel surface. To prevent nitrogen diffusion from the film, steel substrate can be saturated by nitrogen forming a Fe$_3$N layer. The desirable structure at the surface after carburising is martensite, but sometimes, due to high carbon content an proeutectoid Fe$_3$C structure may form at the grain boundaries, leaving the overall surface brittle and may cause defects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.583-585
• /
• 2000

This study reports the fluidic handling method using hydrophobic patterns inside PDMS microchannels. In order to obtain hydrophobic patterns, we pattern fluorcarbon(FC) film surfaces by lift-off process. FC films are deposited by spin coating method and plasma polymerization method. Hydrophobic surfaces are used as the barriers to control fluid flow. Injected liquid is spontaneously filled up inside PDMS-microchannels by the capillary action. Liquid flow stops when it meets hydrophobic regions which can be the barrier against fluid flow. Then, again, when liquid is pressurized externally, liquid can move toward another hydrophilic region by external air pressure. Contact angle analyses are performed on fluorocarbon films to estimate the wettability of film surfaces.

• 전자공학회논문지A
• /
• 제28A권9호
• /
• pp.736-742
• /
• 1991

N$^{+}$poly gate NMOSFETs and p$^{+}$ poly gate (surface type) PMOSFETs with three different gate oxides(SiO2, NO, and ONO) were fabricated. The rapid thermal nitridation and reoxidation techniques have been applied to gate oxide formation. The current drivability of the ONO NMOSFET shows larger values than that of the SiO2 NMOSFET. The snap-back occurs at a lower drain voltage for SiO$_2$ cases for ONO NMOSFET. Under the maximum substrate current bias conditions, hot-carrier effects inducting threshold voltage shift and transconductance degradation were investigated. The results indicate that ONO films exhibit less degradation in terms of threshold voltage shift. It was confirmed that the ONO samples achieve good improvement of hot-carrier immunity. In a SiO$_2$ SC-PMOSFET, with significant boron penetration, it becomes a depletion type (normally-on). But ONO films show excellent impurity barrier properties to boron penetration from the gate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1483-1485
• /
• 2009

Silicon dioxide ($SiO_2$) thin films were deposited using a modified DBD called a "pin-to-plate-type DBD" in order to generate high-density plasmas with a gas mixture of PDMS/$O_2$. The effect of the gas mixture on the physical and chemical properties of $SiO_2$ deposited by the pin-to-plate-type DBD with the mixture of PDMS/$O_2$ was investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.243-246
• /
• 2000

The sputtering systems mainly consist of the three-target holder. The target and substrate were the on-axis type. The MgO and STO substrate were used for the deposition of each layer. The optimum conditions of single-layer thin film were investigated from the SEM images and the XRD patterns. Based on the above conditions, the multi-layer thin films such as YBaCuO/LaGaO/Au/Nb and YBaCuO/Au/Nb were fabricated. The crystalline, the electrical Properties, the energy gap structure and the characteristics of the tunneling barrier on the multi-layer thin film have been investigated and characterized.