• Korea-Australia Rheology Journal
• /
• v.18 no.3
• /
• pp.153-160
• /
• 2006

We analyzed the non-Newtonian and non-isothermal flow with Carreau-Yasuda viscosity model in co-rotating and counter-rotating twin screw extruder systems. The mixing performances with respect to the screw speed, the screw pitch, and the rotating direction have been investigated. The dynamics of mixing was studied numerically by tracking the motions of particles. The extent of mixing was characterized in terms of the deformation rate, the residence time distribution, and the average strain. The results showed that the high screw speed decreases the residence time but increases the deformation rate. Small screw pitch increases the residence time. It is concluded that the high screw speed increases the dispersive mixing performance, while the small screw pitch increases the distributive mixing performance. Co-rotating screw extruder has the better conveying performance and the distributive mixing performance than counter-rotating screw extruder with the same screw speed and pitch. Co-rotating screw extruder developed faster transport velocity and it is advantageous the flow characteristics to the mixing that transfers polymer melt from one barrel to the other barrel.

• Archives of Reconstructive Microsurgery
• /
• v.14 no.1
• /
• pp.50-56
• /
• 2005

There are limited treatment options in the reconstruction of the very large defect in the metaphyseal portion of distal femur and proximal tibia. Fibula is one of the most popular donor of the long bone reconstruction in reconstructive microsurgical field. It has many advantages such as very strong strut tubular bone, very reliable vascular anatomy with large vascular diameter and long pedicle. There are limited donor site problems such as transient peroneal nerve dysfunction. In those situations with the huge long bone defects in distal femur or proximal tibia, the defective bony shape and strength of the transplanted fibular bone is not enough if only one strut of the fibula is transferred. We performed 7 cases of "doule barrel" fibular transplantation on the metaphyseal portion of distal femur and proximal tibial large defects in which it is very difficult to fill the bony gap with conventional bone graft or callotasis methods. It takes averaged 8.3 months since that procedure to obtain bony union. After solid union of the transferred double barrelled fibular graft. There were no stress fracture in our series. So we can propose double barrel fibular graft is useful method in those cases with very large bone defect on the metaphysis of large long bone.

• Nuclear Engineering and Technology
• /
• v.47 no.2
• /
• pp.165-175
• /
• 2015

The application of neutron noise analysis (NNA) to the ex-core neutron detector signal for monitoring the vibration characteristics of a reactor core support barrel (CSB) was investigated. Ex-core flux data were generated by using a nonanalog Monte Carlo neutron transport method in a simulated CSB model where the implicit capture and Russian roulette technique were utilized. First and third order beam and shell modes of CSB vibration were modeled based on parallel processing simulation. A NNA module was developed to analyze the ex-core flux data based on its time variation, normalized power spectral density, normalized cross-power spectral density, coherence, and phase differences. The data were then analyzed with a fuzzy logic module to determine the vibration characteristics. The ex-core neutron signal fluctuation was directly proportional to the CSB's vibration observed at 8Hz and15Hzin the beam mode vibration, and at 8Hz in the shell mode vibration. The coherence result between flux pairs was unity at the vibration peak frequencies. A distinct pattern of phase differences was observed for each of the vibration models. The developed fuzzy logic module demonstrated successful recognition of the vibration frequencies, modes, orders, directions, and phase differences within 0.4 ms for the beam and shell mode vibrations.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.299-305
• /
• 2008

This study compared the physicochemical properties of root hair of white ginseng (WG), root hair of tissue cultured mountain ginseng (MG), root hair of red ginseng (RG) and extruded ginseng samples. The comparison of crude ash and total sugar resulted insignificant differences between extruded and raw samples. MG had a higher content of crude ash, crude protein, amino acids and polyphenolic compound than WG and RG; the total sugar and reducing sugar were highest in RG. Crude fat and acidic polysaccharide in RG and WG were similar to and higher than MG. Crude saponin of treated samples WG1 (moisture content 25%, barrel temperature $110^{\circ}C$) and WG3 (moisture content 35%, barrel temperature $110^{\circ}C$) were 9.80% and 9.73%, respectively, which were the highest among ginseng samples. In conclusion, the extrusion process can be applied to red ginseng manufacturing, and some characteristics of MG were higher than in RG and WG.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.895-900
• /
• 2020

In this paper, BSPE replaced the existing multiplication algorithm that consumes a lot of power. Hardware resources are reduced by using a bit-serial multiplier, and variable integer data is used to reduce memory usage. In addition, MOA resource usage and power usage were reduced by applying LOA (Lower-part OR Approximation) to MOA (Multi Operand Adder) used to add partial sums. Therefore, compared to the existing MBS (Multiplication by Barrel Shifter), hardware resource reduction of 44% and power consumption of 42% were reduced. Also, we propose a hardware architecture design for BSPE Core.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.60-66
• /
• 2008

Each weapon system's muzzle velocity can be used as basic data for operating accurate automatic firing control system. Even among the same kind of ammunition, despite taking into consideration various battlefield parameters, irregular performance causes difficulties in obtaining accurate muzzle velocity data. In this study, pressure in the gun barrel was measured, the experimental relationship between chamber pressure and the projectile's base pressure was found, and a method of obtaining muzzle velocity was researched. Through this method, data regarding muzzle velocity is offered that corrects irregular performance.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.39-50
• /
• 1980

This paper presents the variations obtained in heat flow rate and engine performance of a four-stroke cycle Diesel engine when there were changes in the temperature of cooling water, compression ratio, injection timing of fuel, and other factors. Heat dissipation of engine cylinder was calculated by the heat transfer coefficient of Nusselt's empirical equation and the analysis of distribution of temperature in cylinder barrel was obtained by the finite element method of two-dimensional steady state heat conduction. In this experiment, the out side temperature of cylinder liner was measured by the data logger, and the temperature distribution of liner was computed by the analysis of triangular finite element model under the assumption due to surface heat flux of cylinder inner surface. The results obtained by this study are as follows. Under the given operating condition, the temperature distribution of cylinder liner by using finite element method shows that the mean temperature of barrel is in accordance with the experimental results of Eichelberg and temperature difference is lower than 4.23.deg. C. The heat dissipation of engine decrease in accordance with the decrease of piston mean velocity, compression ratio, and the increase of coolant temperature. Influence on the delay of injection timing of fuel brings about the decrease of heat rejection over the cylinder at constant test conditions.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.239-243
• /
• 2016

High temperature superconductor (HTS) magnet systems usually employ metal current leads which bridge between the cryogenic environment and room temperature. Such current leads are the dominant heat load for these magnet systems due to a combination of electrical resistance and heat conduction. HTS flux pumps enable large currents to be injected into a HTS magnet circuit without this heat load. We present results from an axial-type HTS mechanically rotating flux pump which employs a ferromagnetic circuit and a Cu-stabilized coated conductor (CC) HTS stator. We show the device can be described by a simple circuit model which was previously used to describe barrel-type flux pumps, where the model comprises an internal resistance due to dynamic resistance and a DC voltage source. Unlike previously reported devices, we show the internal resistance and DC voltage in the flux pump are not exactly proportional to frequency, and we ascribe this to the presence of eddy currents. We also show that this axial-type flux pump has superior current injection capability over barrel-type flux pumps which do not incorporate a magnetic circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.197-212
• /
• 1990

This paper present a new design concept of a single chip 16-bit data path using the concept of modular design, the whole system is divided into several blocks which can be operated as an independent system itself. Making the internal blocks can act as a subsystem, it is possible to shorten design turn-around time, to be redesigned effectively, and to optimize the system performance. The designed system is data path. The data path is to manipulate 16-bit integer data. It is composed of aritmetic logic unit, register file, barrel shifter and bus circuit. The widths and lengths of gate in the circuit were determined using SPICE2. The results of circuit simulation were in good agreement with expected circuit characteristics.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.594-600
• /
• 2002

A data manipulation unit capable of bit partitioned shift and various multimedia data type conversions in addition to conventional shift, is presented. Utilizing the similarity between the data type conversion and the shift, the addition of small amount of interconnections to conventional barrel shifter enables data type conversion as well as shift operations with minimal hardware overhead. The presented data manipulation unit is composed of the shifter block for conventional shift and a pack and a unpack block. It has been designed with verilog HDL and the VLSI implementation results using compass 0.6 um standard cell are discussed.