• Journal of the Korean Society of Combustion
• /
• v.19 no.4
• /
• pp.35-41
• /
• 2014

The experiment was conducted to measure temperature and pressure around operating portable butane gas ranges with oversized cookwares. In this experiment, portable butane gas range with different safety equipment and two kinds of oversized cookware, each of which is made of aluminum alloy and rock, was used. As a result, temperature of the bottom of the butane and the pressure of butane barrel tend to aligned with each other. Through this result, it is reasonable that a safety criteria can be decided based on the temperature of the bottom of butane. Especially, portable butane gas ranges are safely conducted under the condition of the temperature is under 50 degree and pressure is under 500 kPa, respectively, at the bottom of the butane barrel.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.1
• /
• pp.73-87
• /
• 2004

In the designing stage, the HANBOK CHIMA is created using a flat pattern with linear shapes. However, when worn, the skirt creates a fluid and organic silhouette. According to the wearing method(wrapping), HANBOK CHIMA can create various shapes and movements. In comparison to the general skirt, It is more effective in revealing the wearer's sense of beauty. The method of wrapping the skirt from the rear is a suitable way of wearing the garment in accord with the Korean ON-DOL(온돌) culture and it creates mystique eroticism. We can devide the silhouettes according to six different period of time. The silhouette of HANBOK CHIMA is affected by the following elements: length, width, pleats, textures and the usage of underwear. [1. Koguryo (5C∼6C) - The first Tent silhouette. 2. The South Dynasty Silla (7C∼8C) - The second Tent silhouette. 3. Kyoryo dynasty (l4C) - Cylinder silhouette. 4. The first Chosun dynasty (late 14C∼17C) - Bell silhouette and Cylinder silhouette. 5. The second Chosun dynasty (mid 18C∼mid 19C) - Bell silhouette and Barrel silhouette. 6. The third Chosun dynasty (late 19C∼the beginning of 20C) - Tent, Cylinder and Bell silhouette.]

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.460-467
• /
• 2011

Cavitation phenomena during the spill process of the Bosch type fuel injection pump for medium-speed diesel engine were investigated by optical observations. Typically, these phenomena can cause a surface damage with material removal or round-off at the plunger and barrel port etc., and may shorten their expected life time. The images, which were recorded with high speed CCD camera and borescope, show that the plunger damage is mainly affected by fountain-like cavitation generated before the end of delivery. And the damages of barrel port and deflector are caused by jet-type cavitation generated after end of delivery.

• Structural Engineering and Mechanics
• /
• v.51 no.1
• /
• pp.15-37
• /
• 2014

In this study, the optimum silo dimensions for the barrel-type steel-concentrated silo with a conical outlet port usable in the hazelnut storage were investigated. Three different types of silo models as Model 1 (1635 tons), Model 2 (620 tons) and Model 3 (1124 tons) were used in the study. Varying wall thicknesses were used for Model 1 (10, 11, 12, 13, 14, 15 and 20 mm), Model 2 (10, 15 and 20 mm) and Model 3 (10, 15 and 20 mm) silos. For Model 1 silo has the most storage capacity here, to determine its optimum wall thickness, the wall thicknesses of 11, 12, 13 and 14 mm were used as different from the other models. Thus the stresses occurring in different lines with ANSYS finite element software were examined. In the study it was determined that the 10, 11 and 12 mm wall thicknesses of the Model 1 silo are not safe in terms of the stresses caused by the vertical pressure loads in the filling conditions. From the view of the filling and discharge conditions, other wall thicknesses and model silos were diagnosed to be secure. The optimum silo dimensions which won't cause any structural problems have been found out as the Model 1 silo with a 13 mm wall thickness when the filling capacity and the maximum von Mises stresses are taken into account. This barrel-type silo with conical outlet port sets forth the most convenient properties in hazelnut storing in terms of engineering.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.86-89
• /
• 2005

A computational work has been performed to investigate the aerodynamics of a projectile which is launched from the two-stage light gas gun. A moving coordinate method for a multi-domain technique is employed to simulate unsteady projectile flows with a moving boundary. The effect of a virtual mass is added to the axisymmetric unsteady Euler equation system. The computed results reasonably capture the major flow characteristics which we generated in launching the projectile supersonically, such as the interaction between the shock wave and the blast wave, the interaction between the vortical flow and the barrel shock, and the steady under-expanded jet. The present computational results properly predict the velocity, acceleration, and drag histories of the projectile.

• Journal of Korea Multimedia Society
• /
• v.10 no.7
• /
• pp.838-845
• /
• 2007

In this paper, we propose a modified cubic convolution scaler for the enlargement or reduction of digital images. The proposed method has less computational complexity than the cubic convolution method. In order to reduce the computational complexity, we use the linear function of the cubic convolution and the difference value of adjacent pixels for selecting interpolation methods. We employ adders and barrel shifts to calculate weights of the proposed method. The proposed method is compared with the conventional one for the computational complexity and the image quality. It has been designed and verified by HDL(Hardware Description Language), and synthesized using Xilinx Virtex FPGA.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.1
• /
• pp.15-21
• /
• 2013

In this paper, sensor system and inspection algorithm in order to inspect steel balance weight for automobile is described. Steel balance weight is composed of clip and weight, which is joined by press process. The defective one has a gap between clip and weight. To detect whether there is a gap, sensor system is simply configured with laser line projector and USB camera, which make it possible to measure the height difference of clip and weight area. Laser line pattern which is made on the surface of a balance weight is captured by USB camera. In case that USB camera is used in machine vision, barrel distortion caused by wide angle lens makes the captured image distorted. Image warping function is applied to correct the distortion. Simple image processing algorithm is applied to extract the laser line information and whether it is good or not is judged through the extracted information.

• Journal of Veterinary Clinics
• /
• v.34 no.5
• /
• pp.384-387
• /
• 2017

A dead male Jeju weasel with clinical signs of severe dehydration and moribund was submitted for the necropsy. Grossly, purple-red ecchymoses were scattered in the surface of the entire lungs. Milky-white mucoid materials occupied in the left bronchial lumens. Histopathologically, an adult worm with thick cuticle layer surrounded by chronic inflammatory cells was embedded in the left caudal lung lobe. Numerous oval or barrel-shaped parasitic eggs with muco-purulent exudates were observed in the dilated bronchus of another section of left caudal lobe. Operculate parasitic eggs showed typical morphologic characteristics such as barrel shape with asymmetry bipolar plugs and thick bi-layered wall. Based on the histopathologic findings and morphological characteristics of parasitic eggs in the pulmonary tissue section, this case was diagnosed as verminous pneumonia associated Eucoleus aerophilus infection in Jeju weasel.

• BMB Reports
• /
• v.38 no.5
• /
• pp.507-516
• /
• 2005

Antimicrobial peptides (AMPs) have been isolated and characterized from tissues and organisms representing virtually every kingdom and phylum. Their amino acid composition, amphipathicity, cationic charge, and size allow them to attach to and insert into membrane bilayers to form pores by 'barrel-stave', 'carpet' or 'toroidal-pore' mechanisms. Although these models are helpful for defining mechanisms of AMP activity, their relevance to resolving how peptides damage and kill microorganisms still needs to be clarified. Moreover, many AMPs employ sophisticated and dynamic mechanisms of action to carry out their likely roles in antimicrobial host defense. Recently, it has been speculated that transmembrane pore formation is not the only mechanism of microbial killing by AMPs. In fact, several observations suggest that translocated AMPs can alter cytoplasmic membrane septum formation, reduce cell-wall, nucleic acid, and protein synthesis, and inhibit enzymatic activity. In this review, we present the structures of several AMPs as well as models of how AMPs induce pore formation. AMPs have received special attention as a possible alternative way to combat antibiotic-resistant bacterial strains. It may be possible to design synthetic AMPs with enhanced activity for microbial cells, especially those with antibiotic resistance, as well as synergistic effects with conventional antibiotic agents that lack cytotoxic or hemolytic activity.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1808-1815
• /
• 2001

The characteristics of a pulsed plasma jet originating from an electrothermal capillary discharge have been investigate using laser-induced fluorescence (LIF) measurement. Previous emission measurements of a 3.1 kJ plasma jet show trial upstream of the Mach disk the temperature and electron number density are about 14,000 K and and 10$\^$17/ cm$\^$-3/, while downstream of the Mach dick tole values are about 25,000 K and 10$\^$18/ cm$\^$-3/, respectively. However, these values are barred on line-of-sight integrated measurements that may be misleading. Hence, LIF is being used to provide both spatially and temporally resolved measurements. Our recent work has been directed at using planar laser-induced fluorescence (PLIF) imaging of atomic copper in the plasma jet flow field. Copper is a good candidate for PLIF studies because it is present throughout the plasma and has electronic transitions that provide an excellent pump-detect strategy. Our PLIF results to date show that emission measurements may give a misleading picture of the flow field, as there appeals to be a large amount of relatively low temperature copper outside the barrel shock. which may lead to errors in temperature inferred from emission spectroscopy. In this paper, the copper LIF image is presented and at the moment, relative density of atomic copper, which is distributed in the upstream of the pulsed plasma jet, is discussed qualitatively.