• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.55-60
• /
• 1986

The objective of this study was to investigate the physical and chemical factors of Pinus densiflora SIEB. et ZUCC. and Quercus mongolica Fisher barks affecting on the adsorption of heavy metals. The results obtained can be summarized as follows: 1. With decreasing the particle size of bark, the adsorption rate of two heavy metal ions were increased. In case of using same particle size, the adsorption of $Fe^{++}$, and $Ni^{++}$ by Quercus bark showed higher than by Pinus bark. 2. The effect of untreated bark on the adsorption of heavy metal was more or less 5% higher than that of HCHO-treated bark in both species. But the color absorbances of the filtrates from HCHO-treated Pinus and Quercus barks were 5.8 and 11.8 times smaller than those of the filtrate from untreated Pinus and Quercus barks, respectively. 3. The maximum adsorption of $Fe^{++}$, and $Ni^{++}$ by bark was shown after 30 min. of the reaction. 4. With increasing the concentration of heavy metal, the amount of adsorption by bark was increased, but the adsorption ratio were decreased. 5. The maximum adsorption of $Fe^{++}$, and $Ni^{++}$ appeared at final pH of $4{\sim}5$, and pH of $3.6{\sim}4.0$ in filtrate, respectively. 6. With increasing the bark weight per a given heavy metal solution, the adsorption ratio were increased, but the amount of adsorption per gram of bark was the highest on the reaction with 2g of bark in a economical sense showing the amount of adsorption of 21mg $Fe^{++}$/g and 7mg $Ni^{++}$/g of Pinus bark, 36mg $Fe^{++}$/g and 9mg $Ni^{++}$/g of Quercus bark, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.23-27
• /
• 1997

Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.49-56
• /
• 2000

This study was designed to investigate the adsorption of heavy metal ions by untreated bark according to the treatment conditions of aqueous solution. The effect of temperature and pH of aqueous solution, particle size of bark, addition of light metal ions on the adsorption was examined, and the competition in adsorption among heavy metal ions was also evaluated. te The adsorption ratio of $Cu^{2+}$ and $Zn^{2+}$ increased with increasing themperature of solution from $-5^{\circ}C$ to $10^{\circ}C$ however, it was relatively constant at temperatures between $10^{\circ}C$ and $55^{\circ}C$. The adsorption ratio of $Cr^{6+}$ increased continuously with increasing the temperature of solution. The maximum adsorption ratio of $Cu^{2+}$, $Zn^{2+}$, and $Pb^{2+}$ was noted at pHs ranged 6 to 7; however, the adsorption ratio declined sharply on either sides of the optimum. The adsorption ratio of $Cr^{6+}$ decreased continuously with increasing the pH of solution. The adsorption ratio increased as decreasing the particle size of bark, and there was little differences in adsorption tendency between pine and oak bark. By the addition of $Ca^{2+}$ or $Mg^{2+}$(10~25 ppm), the adsorption ratio of $Cu^{2+}$ and $Zn^{2+}$ increased. An increase of the adsorption ratio was higher in oak bark than in pine bark. However, the adsorption ratio of $Pb^{2+}$ and $Cr^{6+}$ was not affected by the addition of light metal ions. As the mixed solution of 2 or 3 kinds of heavy metal ions($Cu^{2+}$, $Zn^{2+}$, $Pb^{2+}$) was treated with the untreated bark, the adsorption of $Zn^{2+}$ decreased considerably because of the competitive adsorption among heavy metal ions. Also the adsorption of $Cu^{2+}$ was more and less reduced. However the adsorption of $Pb^{2+}$ was not affected by the presence of other heavy metal ions.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.1-7
• /
• 1986

This investigation involves a study of the physical and chemical factors of Pinus densiflora SIEB. et ZUCC. and Quercus mongolica Fisher barks affecting on the adsorption of heavy mteal ions. The results obtained can be summarized as follows. 1. The capacity of the untreated bark to remove the Cu and Cd from solution was similar to or 5% higher than that of formaldehyde treated bark in both species. Considering that untreated bark lead to color-leaching problem, bark treated with formaldehyde are economical. 2. With decreasing particle size of bark(20-80), the adsorption ratio of the Cu and Cd from solution was increased. Quercus bark adsorbed more Cu and Cd at smaller particle size compared to Pinus bark. 3. The heavy metal eqilibrium adsorption of the bark from Cu and Cd solution was attained within 10 min. Pinus bark removed about 48% of the Cu and 41% of the Cd from solution in 10 min while Quercus bark removed about 50% during that period. 4. As the initial metal concentration increased. the absolute metal uptake was increased while percentage removal was decreased. At the lower metal concentration (10 ppm). Pinus and Quercus barks removed 77-94% of the Cu and 72-84% of the Cd. At high metal concentration (200 ppm), the adsorption ratio was 40% Cu and 25% Cd, respectivelty. 5. The maximum adsorption of the Cu and Cd from solution was obtained at pH 5-6 in filtrate. 6. With increased bark weight per given metal concentration, absolute removal of metal ion from solution was increased, but the percentage removal was decreased. The amount of adsorption was 4.2 mg Cu and 4.2 mg Cd per gr. Pinus, bark and 5.4 mg Cu and 4.3 mg Cd per gr. Quercus bark, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1263-1269
• /
• 2010

This study was performed to evaluate the antioxidant activities and anti-asthma effects of Morus bark water extracts. Inhibitory effect of Morus bark onto free radical generation was determined by measuring DPPH and hydroxyl radical scavenging activities in vitro. Anti-asthma activities of Morus bark water extracts were assessed by testing their effects on the degranulation of mast cell. For this, $\beta$-hexosaminidase released from a basophilic cell line, RBL-2H3 was used and pro-inflammatory cytokines were measured by ELISA kit. The antioxidant activities of water extracts of Morus bark was 59.2% in the DPPH assay at $2,000\;{\mu}g/mL$ and 78.8% in the hydroxyl radical scavenging assay at $2,000\;{\mu}g/mL$. Our results indicated that Morus bark water extracts effectively inhibited free radical generation. Morus bark water extracts inhibited inflammation-mediating substances such as histamine and $\beta$-hexosaminidase release from RBL-2H3 cells. Cytokine release demonstrated a more effective blockading ability of the Morus bark water extracts to the release of IL-4 and TNF-$\alpha$ compared to control. These results demonstrate that Morus bark may be beneficial in the treatment of allergic inflammatory disease.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.604-608
• /
• 2015

In the present work, the improvement of nitrate removal ability was investigated to resolve a eutrophication problem by using Ulmus davidiana (U. davidiana) bark generated from Gangwon province. When the initial pH of aqueous solution was adjusted to 3.5 in batch experiments, the removal efficiencies for 10 and 20 mg/L nitrate increased up to 43 and 37%, respectively. In addition, when U. davidiana bark of 1.0 g/100 mL was used for 8 h, the removal efficiency for 20 mg/L nitrate was 68%. Moreover, when reforming reaction of U. davidiana bark was performed under oxyfluorination conditions, the optimal ratio of partial pressure between fluorine and oxygen was 1 : 9 for an enhanced nitrate adsorption amount. When reformed U. davidiana bark was used for 8 h operation under the optimal oxyfluorination condition, removal efficiencies for 10, 20 and 40 mg/L nitrate were found to be 96, 95 and 59%, respectively. Collectively, these results suggest that our water treatment technology can be effectively utilized to treat high concentrations of nitrate in water bodies.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.6
• /
• pp.527-531
• /
• 2001

In order to isolate antioxidant substances from Rhus verniciflua (RV) , the dried stem bark was extracted with water. The crude water extracts was purified by using HPLC method with a DEAE (anionic type) , CN and ODS column. The purified compound remained stable at pH 3.0∼6.0. but unstable above pH 6.5. It was stable at 100$^{\circ}C$ for 4 hours, but still had about 80% of residual activity after treatment at 100$^{\circ}C$ for 5 hours. In antimicrobial test, no inhibition was observed against Gram-positive and negative bacteria. This compound was stronger than that of commercial antioxidant showed that DPPH test, such as BHT, BHC at the same concentration (20 $\mu\textrm{g}$/ml) .

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.90-97
• /
• 1988

The rate of utilization of the oak cork (bark of Quercus variabilis Blume) ranges only 40-50%. Therefore, this study was carried out to investigate the chemical properties of the oak cork for increasing the utility. 1) The contents of alkali extractives, organic solvent extractives and ash in the oak cork are similar to those of other barks, but hot and cold water extractives and lignin contents are lower than those of the wood. The carbohydrate (cellulose and hemicellulose) content of the oak cork is similar to that of other barks. The suberin contents in the first and the second bark of the oak cork are 34.8 and 32.2% respectively, in the dry weight. 2) Inorganic component contents of the first bark are similar to those of the second. The pH of the first and the second bark are 3.9 and 4.2%. The caloric values of the first and second bark are 6,263 Kcal/kg, and 5,828 Kcal/kg, respectively, and these caloric values are higher than those of other barks. The sclerencymatous cell content of the first bark which is related to the quality of the oak cork is lower than that of second bark, the contents of the sclerenchymatous cell and lignin show the positive correlation. 3) In the dimension of the cross sectioned cork cell, the first bark is bigger than that of the second. The shape of the cork cell is globular shape in the early bark and discoid shape in the late bark. The cross and the radial section are the same shape, but the tangential section shows difference from the other section.

• Food Science and Biotechnology
• /
• v.15 no.3
• /
• pp.424-430
• /
• 2006

Low molecular weight polyphenols were isolated from hot water extracts of radiata pine (Pinus radiata) bark using a Sephadex LH-20 column and characterized by $^1H$ and $^{13}C$ NMR, UV, FT-IR, and GC-MS analyses. Major compounds isolated and identified were protocatechuic acid, trans-taxifolin, and quercetin. Trans-taxifolin, an important intermediate in biosynthetic route of proanthocyanidin (PA), was isolated in large quantities and indicates that PA is a major component of radiata pine bark. Small amounts of polyphenols were identified by GC-MS analysis. The presence of p-hydroxybenzoic acid, vanillic acid, protocatechuic acid, cis- and trans-feruic acid, p-coumaric acid, trans-caffeic acid, (-)-epicatechin, (+)-catechin, trans- and cis-taxifolin, (+)-gallocatechin, and quercetin was confirmed by comparison of mass fragmentation patterns and retention times (RT) with authentic samples. In addition, the presence of astringenin, astringenin glycoside, trans- and cis-leucodelphinidin was strongly assumed from characteristic mass fragment ions due to their conjugated structure and retro Diels-Alder reaction, and also from biosynthetic route of PA. GC-MS analysis allowed us to detect small amounts of phenolic acids and flavonoids and eventually discriminate trans- and cis-configuration in the identified polyphenols.

• Mycobiology
• /
• v.40 no.2
• /
• pp.94-99
• /
• 2012

During an investigation of fungi from an elm tree infested with bark beetles in Korea, one isolate, DUCC401, was isolated from elm wood. Based on morphological characteristics and phylogenetic analysis of the internal transcribed spacer and 28S rDNA (large subunit) sequences, the isolate, DUCC401, was identified as Mariannaea samuelsii. Mycelia of the fungus grew faster on malt extract agar than on potato dextrose agar and oatmeal agar media. Temperature and pH for optimal growth of fungal mycelia were 25oC and pH 7.0, respectively. The fungus demonstrated the capacity to degrade cellobiose, starch, and xylan. This is the first report on isolation of Mariannaea samuelsii in Korea.