• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.5
• /
• pp.387-394
• /
• 2015

Before salvaging a wrecked ship, the physics-based simulation is needed to predict lifting force before real operation by floating crane or barge. Procedures affecting lifting force for the salvage can be divided into three stages. At the first stage, the bottom breakout force for the wrecked ship to escape from seabed sediment should be calculated. At the second step, the current force acting on the wrecked ship while lifting from the seabed to near sea surface should be considered. Finally, buoyancy change near at the sea surface when the wrecked ship start to escape from the water should be considered. In the previous studies, only the breakout force at the first stage was calculated based on simple assumption of embedment depth and contact area of the wrecked ship. Therefore, we develop a program for salvage simulation including whole stages. It is composed of four modules such as the equations of motion, time integration, force calculation, and visualization. As a result, it is applied to simulate lifting the wrecked ship according to various environmental loads including seabed sediments.

• Explosives and Blasting
• /
• v.25 no.2
• /
• pp.71-78
• /
• 2007

In many cases of underwater blasting in South Korea, the special blasting is mainly used for deepening harbor, installing gas pipes, or well blasting to build a bridge. The procedure of well blasting is almost same with shaft blasting, but the difference is that water is filled in before blasting. In case of deepening blasting under water, the first step like drilling, arranging explosives, and wire connection is done on a barge, then the next step such as charging and tamping is accomplished under water by expert divers. Therefore, underwater blasting needs precise and exact plan before blasting. In this paper, authors would like to introduce a case of underwater blasting for deepening the Busan new port with emulsion explosives and non-electric detonators in order to get some of 8,500TEU out sized container vessels entered into the port and to make safe. Considering environment and vibration, the blasting was controlled to minimized the damage to the lighthouse nearby. It will be great help to many other blasting sites where emulsion explosives and non-electric detonators are used for underwater blasting through this case.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.4
• /
• pp.236-243
• /
• 2013

Offshore wind turbines has to be proved against accidental events such as ship collision. In this study, ship collision fragility analysis of offshore wind turbine is done. Dynamic collision analysis is accomplished by considering soil foundation interaction and fluid structure interaction. Uncertainties due to ship weight and speed, angle are also considered. By analyzing dynamic response of offshore wind turbine, fragility curves are obtained for different damage levels. They can be used for restricting boat speed around the wind turbine and allowable size of the boat for inspection and for other purposes. Results of the fragility, it was confirmed fragility of collision speed of bulk ship of 30,000DWT and 850ton barge ship.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.910-914
• /
• 2010

A collision between a barge and an oil tanker of Hebei Spirit caused the release of an estimated 12,547 tons of light crude oil into the Yellow Sea off the west coast of Taean-gun, Korea on December 7, 2007. This study was aimed to evaluate exposure conditions and acute health effects in soldiers participating in the Hebei Spirit oil spill cleanup activities and the association between these and the nature of the work and use of protection devices. The sample comprised 2,624 soldiers stratified by working area and number of working days. We divided working area into the coast of Taean-gun(highly polluted area) and other areas affected by Hebei Spirit oil spill. And we divided number of working days into 1-7 days, 8-14 days, 15-21 days and above 22 days. Data were obtained via a structured, self-administered questionnaire and included information on working area, type of working, number of working days, use of protective materials, and acute health effects. Acute health effects were classified into 5 groups: neurological, respiratory, dermatologic, ophthalmic and other symptoms. Data analysis was performed using unconditional logistic regression used to compute odds ratios and 95% confidence intervals. On logistic regression analysis, working on the coast of Taean-gun was significantly associated with increased risk of acute health problems: headache, dizziness, nausea, general fatigue, insomnia, flushed face, sore throat, dry throat, runny nose, cough, sputum, skin irritation, sore eyes, injection of conjunctiva, tear, and low back pain. Furthermore soldiers working more than 21 days were significantly associated with increased risk of acute health problems: insomnia, flushed face, sore throat, runny nose, cough, sputum, tear, low back pain and fever. Accordingly, the exposure to the oil and the subsequent cleanup efforts were suggested to inflict acute health problems on soldiers participating in the Hebei Spirit oil spill cleanup activities.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.461-468
• /
• 2012

In this study, a Cartesian-grid method based on finite volume approach is applied to simulate the ship motions in large amplitude waves. Fractional step method is applied for pressure-velocity coupling and TVD limiter is used to interpolate the cell face value for the discretization of convective term. Water, air, and solid phases are identified by using the concept of volume-fraction function for each phase. In order to capture the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with weighed line interface calculation (WLIC) method which considers multidimensional information. The volume fraction of solid body embedded in the Cartesian grid system is calculated using a level-set based algorithm, and the body boundary condition is imposed by a volume weighted formula. Numerical simulations for the two-dimensional barge type model and Wigley hull in linear waves have been carried out to validate the newly developed code. To demonstrate the applicability for highly nonlinear wave-body interactions such as green water on the deck, numerical analysis on the large-amplitude motion of S175 containership is conducted and all computational results are compared with experimental data.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.57-61
• /
• 2004

According to the research result of existing regarding the seabed organic sediment, contamination it flows from the land and the sea become the enemy in the coastal water. It was caused with the summer season water temperature rise and dispersing recall respect advancement. Phosphorus which is a main reason of red tide actual condition came to reveal vast quantity with the facts that it gushes. Specially, in the case of the coastal closing waters and the nursery, as the corpse and the fresh fish washing veterinarian was imbrued, it is the actual condition where is more deepened. Consequently the development of shallow layer dredging method of that suction power which is stabilized is demanded to be able to dredge only the sediment layer which has not become the pressure and is a main reason of being imbrued. The dredging methods using the pressure difference minimize the suction of the seabed sediment. This method is stable that suction power which occurs from guard difference of the guard and the guard of the dredging system inland water. That's why it is possible to sort dredging of the organic sediment ranging in upper layer sediment and it will be able to expect the minimization of dredging quantity. Increase of the expense that it followsin orthocenter with the fact will not grow. Because the pressure difference of the dredger inland water is occurred by the suction power. Maintenance administrative costs are reduced, because the one of smallest dredging system maneuvers and the barge which affixes an integrated operation system is mainly in a resting. To reduce a dredging hour, it will be able to solve in the condensed water as operating the jar guard post.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.6
• /
• pp.7-13
• /
• 2012

This paper presents a numerical study of the wave loads acting on offshore structures using a Cartesian-grid-based flow simulation method. Finite volume discretization with a volume-of-fluid (VOF) method is adopted to solve two-phase Navier-Stokes equations. Among the many variations of the VOF method, the CICSAM scheme is applied. The body boundary conditions are satisfied using a porosity function, and wave generation is carried out by using transient (wave or damping) zone approaches. In order to validate the present numerical method, three different basic offshore structures, including a sphere, Pinkster barge, and Wigley model, are numerically investigated. First, diffraction and radiation problems are solved using the present numerical method. The wave exciting and drift forces from the diffraction problems are compared with potential-based solutions. The added mass and wave damping forces from the radiation problems are also compared with the potential results. Next, the wave-induced motion responses of the structures are calculated and compared with the existing experimental data. The comparison results are fairly good, showing the validity of the present numerical method.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.153-160
• /
• 2010

Simulation visualization technology is an important constituent through which users directly interact with simulators. Simulator users have a needs for more fast, realistic and intuitive visualization. Though hardware-related performances such as computing power and visual equipment have been grown, the limits have existed in graphics rendering engines generally used in marine simulator up to now. This paper has focused on the review of graphic rendering engines available for simulation visualization. We had deduced system requirements for visualization of ship handling simulation, had surveyed graphic rendering engines as commercial and open source, and analyzed strengths and weakness of them. The feasibility study for simulation visualization of tug-barge transportation with an open source graphics rendering engine(OGRE3D) has been demonstrated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.274-276
• /
• 2017

Korean e-Navigation is a system that introduced to reduce maritime accidents. In order to reduce marine accidents, Korean e-Navigation provides the following services-"Vulnerable Vessel Monitoring", "Vulnerable Vessel support & monitoring", "Optimal safety route", "ENC Streaming for Small Vessel", "Tug & Barge Support", "Maritime Safety Information Providing". Each Service is a system separated into finctional units and integrated into Korean e-Navigation. Korean e-Navigation is introducing data middleware to integrate each service and the DDS(Data Distribution Service) is judged to be effective. Thus, this paper analyzed the characteristics of DDS middleware types suitable for each service of e-Navigation.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.5
• /
• pp.285-293
• /
• 2020

This study evaluated the Hook-up installation of an offshore site construction process, which is the final step in an offshore site installation process. During Hook-up installation, the offshore structure can have a detrimental effect on the work stability due to low-frequency motion. Moreover, economic costs can be incurred by the increase in available days of a tugboat. Therefore, this study developed a numerical analysis program to assess the dynamic behavior of mooring systems during hook-up installation to analyze the generally performed installation process and determine when the tugboat should be released. In this program, the behavior of an offshore structure was calculated using Cummin's time-domain motion equation, and the mooring system was calculated by Lumped mass method (LMM). In addition, a tugboat algorithm for hook-up installation was developed to apply the Hook-up procedure. The model used in the calculations was the barge type assuming FPSO (Floating production storage and off-loading) and has a taut mooring system connected to 16 mooring lines. The results of the simulation were verified by comparing with both MOSES, which is a commercial program, and a calculation method for restoring coefficient matrix, which was introduced by Patel and Lynch (1982). Finally, the offset of the structure according to the number of tugboats was calculated using the hook-up simulation, and the significant value was used to represent the calculation result.