• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.911-916
• /
• 2003

The mitochondrial DNA(mtDNA) D-loop region was amplified from Duroc(Sus scrofa) by polymerase chain reaction(PCR). The oligonucleotide primer used to amplify the Sus scrofa mtDNA D-loop region was designed using tRNA-Pro and tRNA-Phe sequence in mtDNA regions highly conserved in many other animal species. There were 1,145 base pairs(bp) in the D-loop region. The middle of the region contained 10 tandem repeat of an 10-bp Sus scrofa-specific sequence, TACACGTGCG. We designed primers for PCR-mediated single stranded conformation polymorphism(SSCP) analysis that amplified a 345 bp fragment, which contained the most variable region according to our sequencing data. SSCP analysis of denatured amplification products was carried out by polyacrylamide(8%) gel electrophoresis followed by ethidium bromide staining. The SSCP analysis identified two band patterns(A and B) and comparision of these two nucleotide sequences identified 21 base substitutions. These results show that SSCP analysis of the D-loop region is useful for detecting the genetic polymorphism.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.222-222
• /
• 2012

Metal oxide gas sensors based on semiconductor type have attracted a great deal of attention due to their low cost, flexible production and simple usability. However, most works have been focused on n-type oxides, while the characteristics of p-type oxide gas sensors have been barely studied. An investigation on p-type oxides is very important in that the use of them makes possible the novel sensors such as p-n diode and tandem devices. Monoclinic cupric oxide (CuO) is p-type semiconductor with narrow band gap (~1.2 eV). This is composed of abundant, nontoxic elements on earth, and thus low-cost, environment-friendly devices can be realized. However, gas sensing properties of neat CuO were rarely explored and the mechanism still remains unclear. In this work, the neat CuO layers with highly ordered mesoporous structures were prepared by a template-free, one-pot solution-based method using novel ink solutions, formulated with copper formate tetrahydrate, hexylamine and ethyl cellulose. The shear viscosity of the formulated solutions was 5.79 Pa s at a shear rate of 1 s-1. The solutions were coated on SiO2/Si substrates by spin-coating (ink) and calcined for 1 h at the temperature of $200{\sim}600^{\circ}C$ in air. The surface and cross-sectional morphologies of the formed CuO layers were observed by a focused ion beam scanning electron microscopy (FIB-SEM) and porosity was determined by image analysis using simple computer-programming. XRD analysis showed phase evolutions of the layers, depending on the calcination temperature, and thermal decompositions of the neat precursor and the formulated ink were investigated by TGA and DSC. As a result, the formation of the porous structures was attributed to the vaporization of ethyl cellulose contained in the solutions. Mesoporous CuO, formed with the ink solution, consisted of grains and pores with nano-meter size. All of them were strongly dependent on calcination temperature. Sensing properties toward H2 and C2H5OH gases were examined as a function of operating temperature. High and fast responses toward H2 and C2H5OH gases were discussed in terms of crystallinity, nonstoichiometry and morphological factors such as porosity, grain size and surface-to-volume ratio. To our knowledge, the responses toward H2 and C2H5OH gases of these CuO gas sensors are comparable to previously reported values.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2013

This study focuses on a ship detection and tracking method using Frequency Modulated Continuous Wave (FMCW) radar used for horizontal surveillance. In general, FMCW radar can play an important role in maritime surveillance, because it has many advantages such as low warm-up time, low power consumption, and its all weather performance. In this paper, we introduce an effective method for data and signal processing of ship's detecting and tracking using the X-band radar. Ships information was extracted using an image-based processing method such as the land masking and morphological filtering with a threshold for a cycle data merged from raw data (spoke data). After that, ships was tracked using search-window that is ship's expected rectangle area in the next frame considering expected maximum speed (19 kts) and interval time (5 sec). By using this method, the tracking results for most of the moving object tracking was successful and those results were compared with AIS (Automatic Identification System) for ships position. Therefore, it can be said that the practical application of this detection and tracking method using FMCW radar improve the maritime safety as well as expand the surveillance coverage cost-effectively. Algorithm improvements are required for an enhancement of small ship detection and tracking technique in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.2
• /
• pp.113-125
• /
• 2012

This research is aimed at evaluating the land surface characterization of KOMPSAT-3A middle infrared (MIR) data. Airborne Hyperspectral Scanner (AHS) data, which has MIR bands with high spatial resolution, were used to assess land surface temperature (LST) retrieval and classification accuracy of MIR bands. Firstly, LST values for daytime and nighttime, which were calculated with AHS thermal infrared (TIR) bands, were compared to digital number of AHS MIR bands. The determination coefficient of AHS band 68 (center wavelength $4.64{\mu}m$) was over 0.74, and was higher than other MIR bands. Secondly, The land cover maps were generated by unsupervised classification methods using the AHS MIR bands. Each class of land cover maps for daytime, such as water, trees, green grass, roads, roofs, was distinguished well. But some classes of land cover maps for nighttime, such as trees versus green grass, roads versus roofs, were not separated. The image classification using the difference images between daytime AHS MIR bands and nighttime AHS MIR bands were conducted to enhance the discrimination ability of land surface for AHS MIR imagery. The classification accuracy of the land cover map for zone 1 and zone 2 was 67.5%, 64.3%, respectively. It was improved by 10% compared to land cover map of daytime AHS MIR bands and night AHS MIR bands. Consequently, new algorithm based on land surface characteristics is required for temperature retrieval of high resolution MIR imagery, and the difference images between daytime and nighttime was considered to enhance the ability of land surface characterization using high resolution MIR data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.3
• /
• pp.162-168
• /
• 2017

Shallow-water bathymetry survey has been conducted using high definition color images obtained at the altitude of 100 m above sea level using a drone. Shallow-water bathymetry data are one of the most important input data for the research of beach erosion problems. Especially, accurate bathymetry data within closure depth are critically important, because most of the interesting phenomena occur in the surf zone. However, it is extremely difficult to obtain accurate bathymetry data due to wave-induced currents and breaking waves in this region. Therefore, optical remote sensing technique using a small drone is considered to be attractive alternative. This paper presents the potential utilization of image processing algorithms using multi-variable linear regression applied to red, green, blue and grey band images for estimating shallow water depth using a drone with HD camera. Optical remote sensing analysis conducted at Wolpo beach showed promising results. Estimated water depths within 5 m showed correlation coefficient of 0.99 and maximum error of 0.2 m compared with water depth surveyed through manual as well as ship-board echo-sounder measurements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.967-975
• /
• 2006

In this paper, design and implementation of a very compact and cost effective front-end module are presented for IEEE 802.16 FWA(fixed Wireless Access) in the 40 GHz band. A multi-layer LTCC(Low Temperature Co-fred Ceramic) technology with cavity process to achieve excellent electrical performances is used to fabricate the front-end module. The wirebond matching circuit design of switch input/output port and waveguide transition to connect antenna are optimally designed to keep transmission loss low. To reduce the size of the front-end module, the dielectric waveguide filter is developed instead of the metal waveguide filter. The LTCC is composed of 6 layers(with the thickness of a layer of 100 um) having a relative dielectric constant of 7.1. The front-end module is implemented in a volume of $30{\times}7{\times}0.8mm^3$ and shows an overall insertion loss < 5.3 dB, and image rejection value > 49 dB.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.167-178
• /
• 2020

KOMPSAT-3A images have been used in various kinds of applications, since its launch in 2015. However, there were limits to scientific analysis and application extensions of these data, such as vegetation index estimation, because no tool was developed to obtain the surface reflectance required for analysis of the actual land environment. The surface reflectance is a product of performing an absolute atmospheric correction or calibration. The objective of this study is to quantitatively verify the accuracy of top-of-atmosphere reflectance and surface reflectance of KOMPSAT-3A images produced from the OTB open-source extension program, performing the cross-validation with those provided by a site measurement data of RadCalNet, an international Calibration/Validation (Cal/Val) portal. Besides, surface reflectance was obtained from Landsat-8 OLI images in the same site and applied together to the cross-validation process. According to the experiment, it is proven that the top-of-atmosphere reflectance of KOMPSAT-3A images differs by up to ± 0.02 in the range of 0.00 to 1.00 compared to the mean value of the RadCalNet data corresponding to the same spectral band. Surface reflectance in KOMPSAT-3A images also showed a high degree of consistency with RadCalNet data representing the difference of 0.02 to 0.04. These results are expected to be applicable to generate the value-added products of KOMPSAT-3A images as analysisready data (ARD). The tools applied in thisstudy and the research scheme can be extended as the new implementation of each sensor model to new types of multispectral images of compact advanced satellites (CAS) for land, agriculture, and forestry and the verification method, respectively.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.735-747
• /
• 2020

Recent advanced UAV (Unmanned Aerial Vehicle) technology supply new opportunities for estimating crop condition using high resolution imagery. We analyzed the diurnal change of reflectance and NDVI (Normalized Difference Vegetation Index) in UAV imagery for crop monitoring in clear day condition. Multi-spectral images were obtained from a 5-band multi-spectral camera mounted on rotary wing UAV. Reflectance were derived by the direct method using down-welling irradiance measurement. Reflectance using UAV imagery on calibration tarp, concrete and crop experimental sites did not show stable by time and daily reproducible values. But the CV (Coefficient of Variation) of diurnal NDVI on crop experimental sites was less than 5%. As a result of comparing NDVI at the similar time for two day, the daily mean average ratio of error showed a difference of 0.62 to 3.97%. Therefore, it is considered that NDVI using UAV imagery can be used for time series crop monitoring.

• Science of Emotion and Sensibility
• /
• v.14 no.2
• /
• pp.311-320
• /
• 2011

To quantitatively analyze the effects of color stimulation which is one of the major affecting factors on human emotion, we studied the relationship between color preference and the Electroencephalography (EEG) to 3 color stimuli; bright yellow red (BYR), deep green yellow (DGY), and vivid blue (VB). Physiological signal measured by EEG on the color stimulation was closely related with their well-known colorful images. The brain become more activated with decreasing the color temperature (BYR${\geq}$DGY>VB), and the right brain is more sensitive than the left. On the whole, the EEG values of the frequency bands are in order to beta ${\geq}$ theta and alpha > gamma. As decreasing the color temperature, beta wave increased (BYR${\geq}$DGY>VB), and alpha, beta and gamma waves increased with increasing the color temperature (BYR${\geq}$DGY>VB). The relationship between the color preference and EEG values showed EEG gets more activated at some frequency bands when the color preference becomes higher. In conclusion, the specific frequency band could be activating by a color stimuli which had showed higher the preference. It means that these color stimuli can apply for various industries such as beauty industry, interior design, fashion design, color therapy, and etc.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.572-588
• /
• 2013

In this paper, 4K-UHDTV or 8K-UHDTV and UHD-3DTV that the next generation broadcasting implementation and the possibility of direct receiving environment construction is analyzed on the terrestrial broadcasting. Particularly, we investigated the possibility by analyzing the previous and related works with regard to UHDTV transmission by DVB-T2 that is one of the best commercialized transmission mode. In order that the UHDTV broadcasting succeeds once again after completion of digital terrestrial switch over at the end of 2012, the ultra high resolution image transfer is important. However, the direct, the indoor and ubiquitous receiving environment is important in not only TV but also the personal type multimedia terminal in the sense of UHDTV service penetration. Therefore, in this paper, by using SFN and high error-correcting mode in DVB-T2 standard, the efficient frequency utilization and effective reception environment construction is illustrated. Particularly, SFN network constitution by 2 mutually different frequencies including the VHF bandwidth and UHF band, and etc. is shown. And the method that builds the free wireless receive environment by using SFN low power radio repeater and for home use gap filler is proposed. And the effect and frequency amount required are presented, when UHDTV broadcasting use 10MHz bandwidth.