• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.63-64
• /
• 2013

Induction motors' faults detection is almost a popular topic among researchers. Monitoring the output of motors is a key factor in detecting these faults. (Short-time) Fourier, (continuous, discrete) wavelet, and extended Park vector transformations are among the methods for fault detection. One major deficiency of these methods is not being able to detect the severity of faults that carry low energy information, e.g. in ball bearing system failure, there is absolutely no way to detect the severity of fault using Fourier or wavelet transformations. In this paper, the authors have applied the Discrete Wavelet Transform (DWT) frequency-domain analysis to detect bearing faults in an induction motor. In other words, in discrete transform which the output signal is decomposed in several steps and frequency resolution increases considerably, the frequency-band analysis is performed and it will be verified that first of all, fault sidebands become more recognizable for detection in higher levels of decomposition, and secondly, the inner race bearing faults turn out easier in these levels; and all these matter because of eliminating the not-required high energy components in lower levels of decomposing.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.190-195
• /
• 2004

The compression-compression fatigue properties of the closed cell Al-Si-Ca alloy foams have been studied. The monotonic and cyclic compressive properties were compared with each other and the fatigue stress-life (S-N) curves were presented. In compression-compression fatigue, the crushing was found to initiate in a single band which broadens gradually with additional fatigue cycles. Progressive shortening of the specimen took place due to a combination of low cycle fatigue failure and cyclic ratcheting which is in accordance with the findings of previous researchers [1-3]. Young's modulus of the foam was found to decrease with the increasing strain in case of fatigue test however in case of monotonic compression test the value of Young's modulus increased with the strain (number of cycles). The endurance limit on the basis of $10^{7}$ cycles obtained by extrapolating the experimental results were 0.98 MPa and 1.70 MPa for load ratios 0.1 and 0.5 respectively which are 34 % and 59 % of the plateau stress.

• Journal of Chest Surgery
• /
• v.18 no.2
• /
• pp.265-272
• /
• 1985

Congenital aneurysm of sinus of Valsalva is one of the rare congenital heart disease, which is usually asymptomatic until rupture. The aneurysm usually ruptures into a cardiac chamber and produces an aorto-intracardiac fistula. Ruptured aneurysm is a grave lesion in that it causes heart failure and subsequent death. If, however, it is discovered in its early stages and operated on properly, it can be corrected with considerable success. Form January 1975 through December 1984, 18 consecutive patients with congenital aneurysm of sinus of Valsalva underwent corrective surgery using total cardiopulmonary bypass in our department of Thoracic Surgery. 1. The incidence was about 0.9% of surgical cases of congenital heart disease during that period. 2. 13 were males and 5 females, with ages ranging 12 years to 52 years. 3. Associated anomalies were VSD in 14, infundibular PS in 1, aberrant muscle band in RVOT in 1, and secondary aortic insufficiency in 9. 4. 17 were suggested to arise from right coronary sinus and 1 from noncoronary sinus; Among 17, 12 ruptured into right ventricle, and one from noncoronary sinus into right atrium. 5. Surgical correction was performed by means of direct suture closure with combined pledget or patch graft after aneurysm resection, and associated lesions were also corrected simultaneously. 6. There was only one case of operative mortality, and all the other patients were relatively uneventful in their follow-up studies.

• Wind and Structures
• /
• v.5 no.6
• /
• pp.527-542
• /
• 2002

Wind-excited vibrations of slender structures can induce fatigue damage and cause structural failure without exceeding ultimate limit state. Unfortunately, the growing importance of this problem is coupled with an evident lack of simple calculation criteria. This paper proposes a mathematical method for evaluating the crosswind fatigue of slender vertical structures, which represents the dual formulation of a parallel method that the authors recently developed with regard to alongwind vibrations. It takes into account the probability distribution of the mean wind velocity at the structural site. The aerodynamic crosswind actions on the stationary structure are caused by the vortex shedding and by the lateral turbulence, both schematised by spectral models. The structural response in the small displacement regime is expressed in closed form by considering only the contribution of the first vibration mode. The stress cycle counting is based on a probabilistic method for narrow-band processes and leads to analytical formulae of the stress cycles histogram, of the accumulated damage and of the fatigue life. The extension of this procedure to take into account aeroelastic vibrations due to lock-in is carried out by means of ESDU method. The examples point out the great importance of vortex shedding and especially of lock-in concerning fatigue.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2002

This study is the first attempt to understand the feeding physiology of a sea-urchin larva on a red-tide dinoflagellate. Fifteen day old larvae of S. intermedius capture C. polykrikoides cells by localized reversal of ciliary beats. No failure to transporte the algal cells from theciliated band to mouth and no rejection at the mouth suggest that C. polykrikoides has no feeding deterrence to S. intermedius larvae. The trend obtained for the clearance rate of S. intermedius larvae is similar to that of other sea urchin larvae. Thus, the clearance rate decreased as the algal concentration increased. Maximum clearance rate of S. intermedius on C. polykrikoides was 17.7 $\mu l$/larva/hr. Ingestion rate rapidly increased at lower algal concentrations and saturated at higher concentrations. There was no inhibition in ingestion rate at the highest prey concentration of ca. 3000 cells/ml. Maximum ingestion rate of S. intermedius on C. polykrikoides was 131 ngC/larva/d, which is higher than that reported for the larvae of the mussel Mytilus gal-lotrovincialis, but lower than that of the ciliate Strombidinopsis sp. The grazing rate, calculated by combining the field data on algal abundances with experimental data on ingestion rate, suggests that due to its low abundance, sea urchin Iarva has no significant grazing impact on C. polykrikoides population.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.264-274
• /
• 2001

An integrated fatigue strength assessment system was computerized. The system developed consists of 9 modules: user interface, cycle counting, load history construction, data searching, fatigue properties estimation, fatigue data analysis, true stress and strain analysis, expert system for crack initiation life prediction, fatigue crack initiation and propagation life prediction. Fatigue strength database also was included in this system. The fatigue expert system helps a beginner to predict a fatigue crack initiation life in fatigue strength assessment. The expert system module in this system is developed on the personal computer by using C language and UNiK, an expert system developing tool. To evaluate the system, the results of test under variable loading of SAE and failure data from a field were analyzed. The evaluation show that the system provided fatigue life prediction within 3-scatter band and gave reasonable predictions. To get more accurate predictions of fatigue life without fatigue properties, we recommend utilizing the system along with the fatigue strength database.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.157-162
• /
• 2001

Fretting is a potential degradation mechanism of structural components and equipments exposed to various environments and loading conditions. The fretting degradation, for example, can be observed in equipments of nuclear, fossil as well as petroleum chemical plants exposed to special environments and loading conditions. It is well known that a cast stainless steel(CF8M) used in a primary reactor coolant(RCS) degrades seriously when that material is exposed to temperature range ken $290^{\circ}C{\sim}390^{\circ}C$ for long period. This degradation can be resulted into a catastrophical failure of components. In the present paper, the characteristics of the fretting fatigue are investigated using the artificially aged CF8M specimen. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 1800hr at $430^{\circ}C$ respectively. Through the investigations, the simple fatigue endurance limit of the virgin specimen is not altered from that obtained from the fatigue tests imposed the fretting fatigue. The similar tests are performed using the degraded specimen. The results are not changed from those of the virgin specimen. The significant effects of fretting fatigue imposed on both virgin and degraded specimen on the fatigue strength are not found.

• Korean Journal of Veterinary Research
• /
• v.57 no.1
• /
• pp.37-42
• /
• 2017

Getah virus (GETV) infection causes sporadic outbreaks of mild febrile illness in horses and reproductive failure in pigs. In this study, we established a reverse transcription polymerase chain reaction (RT-PCR) method to detect GETV from suspected virus-infected samples. The reaction conditions were optimized and validated by using RNA extracted from GETV propagated in cell culture. A GETV-specific GED4 primer set was designed and used to amplify a 177 bp DNA fragment from a highly conserved region of the E1 glycoprotein gene in the GETV genome. RT-PCR performed with this primer set revealed high sensitivity and specificity. In the sensitivity test, the GED4 primer set detected GETV RNA at the level of $10^{2.0}\;TCID_{50}/mL$. In the specificity test, the GED4 primer set amplified only a single band of PCR product on the GETV RNA template, without non-specific amplification, and exhibited no cross-reactivity with other viral RNAs. These results suggest that this newly established RT-PCR method is useful for accurate identification of GETV infection in animals.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.771-775
• /
• 1997

Ectopic eruption is defined as abnormal eruption and results in malpositioned teeth and abnormal root resorption of adjacent teeth. Ectopic eruption, first reported by Chapman, occurs in 3% of the population and that mostly in the maxilla. Etiologic factors include narrow maxilla, large maxillary teeth, retarded calcification of the first molar, inclined eruption path of the first molar and retruded position of the maxilla. Impaction of the second molar is rare and occurs mostly in the mandible. Major causes are large teeth and insufficient arch length. Halterman has devised a method of distalizing a ectopically erupting first molar by cementing a band on the second deciduous molar with a hook soldered and a button bonded to the occlusal surface of the first permanent molar. Ectopically erupted posterior teeth should be treated early to maintain normal development of the dentition, harmony of facial growth and occlusal support, a failure to do so could result in severe malocclusion, periodontal damage and continued root resorption of the adjacent teeth. Early detection and treatment is thus vital. The author is submitting this report as he has obtained favorable results in treating a patient who came to the SNUDH Dept. of Pediatric Dentistry complaining of the first molar by using a modified Halterman appliance.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.440-442
• /
• 1995

In a recently as renewable energy source photovoltaic(PV) system using solar energy has been very widely researched because of its pollution-free and infinity. Especially many researches are intensively focused on small scale utility interactive PV system which can use dead space and easily make power stabilized from unstable natural energy source. In this system one of the most important matters is islanding protection. Islanding phenomenon appears when power failure occurs. For the safety of utility interactive PV system must has the function of not only system protection but also detection of islanding. This paper describes parallel operating alghorithm using reactive power variation method and twin peak band pass filter. This alghorithm is verified useful by simulation.