본 연구에서는 무게 약 1톤, 속도 약 100km/h에 달하는 멀티콥터 형 UAM(Urban Air Mobility)가 도심 지역에서 추락했을 때 발생할 수 있는 인명피해를 정량적으로 분석하였다. UAM 수요가 가장 많을 것으로 예상되는 서울지역의 인구밀도 및 건물 데이터 베이스를 기반으로 UAM 추락 시 충돌에 노출되는 인구를 도출하였고 멀티콥터 형 비행체가 제어 불가능한 상태에서의 무동력 추락을 고려하여 항력을 고려한 자유낙하 모델을 통해 UAM 추락 시 사고영향 반경을 계산하였다. 더불어, 사고영향 반경이 증가할 때 지상의 인명피해의 변화를 분석하였다. 최종적으로 서울지역에 대한 UAM 추락 시 지상 인명피해 맵을 생성하였고 서울의 대부분의 지역에서 UAM 추락 시 약 1~10명 내외의 인명피해가 발생할 수 있음을 확인하였다. 이를 통해 TLS (Target Level of Safety)를 만족하는 UAM의 고장률 요구사항을 분석하였다.
본 연구에서는 3D 아이소파라메트릭 쉘요소 모델을 사용하여 전단농화유체(STF: shear thickening fluid)가 함침된 케블라 페브릭(Kevlar fabric) 복합재의 방탄성능에 대하여 해석을 수행하였다. 다양한 적층복합재(12, 18, 20, 24-layer)를 대상으로 탄두 초기속도에 따른 충돌 후 속도(Residual velocity)를 측정하여 실험치와 비교하였다. SFT가 함침된 복합재의 방탄 성능의 효과를 검증하기 위하여 다양한 속도영역에서 STF가 함침된 것과 함침 되지 않은 것의 방탄성능을 비교하였다. STF가 함침된 케블라 페브릭은 450 m/s 이하의 저속에서는 비교적 큰 마찰효과를 일으키며 고속에서는 STF가 함침된 Kevlar fabric의 마찰효과는 기대할 수 없는 수준으로 오히려 역효과를 일으키는 것을 확인할 수 있었다. 연구를 통해 STF가 함침된 케블라 페브릭의 특성을 퇴화 3D 쉘 요소를 사용하여 효과적으로 모사할 수 있었으며, 실험 치와의 결과 비교를 통하여 그 유효성을 검증하였다.
새로운 탄두 기술은 탄도 미사일 적재로부터 높은 파괴성능을 얻기 위해 설계 및 개발 되어왔다. 주로 발사체 또는 관통자를 포함하는 중앙 탄두 코어의 설계와 관련된 많은 연구가 있다. 분명히, 소형 폭탄 또는 자탄 적재 유형 구성은 많은 충격을 요구하기 때문에 하나의 발사체로부터 살상에 매우 취약하다. 이러한 요구사항을 바탕으로 최적의 직격요격체 구성은 모든 자탄을 직격할 수 있는 최소 질량과 상대 속도를 가져야 한다. 관통자 형상과 크기의 설계는 직접적으로 탄두의 공간과 중량에 관련되어 있다. 관통자의 형상, 크기, L/D, 재료 그리고 폭발팩의 구간 내부에 삽입되는 방식은 성공적인 관통자 설계 완성에 중요하다. AUTODYN-3D code 가 관통자의 관통특성을 연구하기 위해 사용되었다. 수치해석의 목적은 초기속도, 관통자의 L/D 및 형상과 같은 다양한 초기 조건 아래 초고속 충격에 의해 생성되는 관통자의 관통특성을 확인하는 것이다.
After finishing Cold War, the U.S. Navy's ability to Sea control has been gradually eroded last 15-20 years. The global security environment demands that the surface Navy rededicate itself to sea control, as a new group of potential adversaries is working to deny U.S. navy command of the sea. China has been increasing their sea denial capability, such as extended anti-surface cruise missile and anti-surface ballistic missile. To cope with this situation, the U.S. Naval Surface Forces Command has announced Surface Forces Strategy: Return to Sea Control. It is a new operating and organizing concept for the U.S. surface fleet called 'distributed lethality'. Under distributed lethality, offensive weapons such as new ASCMs are to be distributed more widely across all types of Navy surface ships, and new operational concept for Navy surface fleet's capability for attacking enemy ships and make it less possible for an enemy to cripple the U.S. fleet by concentrating its attack on a few very high-value Navy surface ships. By increasing the lethality of the surface ships and distributing them across wide areas, the Navy forces potential adversaries to not only consider the threat from our carrier-based aircraft and submarines, but they now consider the threat form all of those surface ships. This idea of using the distributed lethality template to generate surface action groups and adaptive force package and to start thinking about to increase the lethal efficacy of these ships. The U.S. Navy believes distributed lethality increases the Navy's sea control capability and expands U.S. conventional deterrence. Funding new weapons and renovated operating concept to field a more lethal and distributed force will enable us to establish sea control, even in contested area. The U.S. Navy's Surface Forces Strategy provides some useful implications for The ROK Navy. First the ROK Navy need to reconsider sea control mission. securing sea control and exploiting sea control are in a close connection. However, recently the ROK Navy only focuses on exploiting sea control, for instance land attack mission. the ROK Navy is required to reinvigorate sea control mission, such as anti-surface warfare and anti-air warfare. Second, the ROK Navy must seek the way to improve its warfighting capability. It can be achieved by developing high-edge weapons and designing renewed operating concept and embraced new weapon's extended capabilities.
Objective: The objective of this research is to quantitatively analyze muscle activities of arm and shoulder, according to direction in various types of one-handed manual material handling, based on surface electromyography. Background: Workers in industrial sites frequently carry out one-handed manual material handling using arm and shoulder muscles. Therefore, chronic load and accumulated fatigue occur to arm and shoulder muscles, which becomes a main cause of upper arm and shoulder musculoskeletal disorders. The shoulder muscles have widely range of motion, and complex interactions take place among various muscles including rotator cuff muscles. In this regard, research on interactions among should muscles, according to such various dynamic motions, is required. Method: Ten male subjects in their 20s participated in this research. This research considered upward, downward, leftward, rightward, forward and backward directions and fourteen muscles around arm and shoulder (biceps brachii and trapezius, etc.) as independent variables. The mean muscle activity was set as the dependent variable. This research extracted $4^{th}{\sim}7^{th}$ repetition signals according to ten times of repetitive muscle contraction, and analyzed the muscle activity concerned using the envelope detection technique. Results: The mean muscle activity of upward direction was analyzed highly statistically significant. The reason is that the effect of gravity works to arm and shoulder muscles. Also, it is conjectured that deformation of coracoacromial ligament was caused, and its contact pressure increased, due mainly to the shoulder flexion, and therefore load was analyzed high. Muscle activity was analyzed significantly low, according to concentric ballistic motion used in the concentric contraction phase by storing elastic energy in the eccentric contraction phase with a motion to bring the weight to the front of subject's body as to downward, leftward and backward directions. Because, elbow joint's flexion-extension motions mainly occurred, biceps brachii was analyzed high muscle activity as the prime mover. Conclusion: The information on the quantitative load of muscles can be applied to ergonomic work design for one-handed manual material handling to minimize muscle load. Application: This research has effectively identified muscle activity according to dynamic contraction by applying an envelope detection technique. The results can be used for ergonomic work design to minimize muscle load during the one-handed manual material handling, according to each direction. The research results are expected to be used for musculoskeletal disorder prevention and physiotherapy in the rehabilitation medical field, based on the muscle load of arm and shoulder in various directions.
본 다양한 위협이 대두되는 현재의 안보상황에 대응하기 위해서는 적절한 무기체계 선정과 이를 견인할 수 있는 핵심기술 개발이 필수적인 상황이다. 북한의 핵실험, ICBM 개발 등의 안보위협이 대두되는 현 상황과 경제성장률이 둔화되고 있는 우리나라의 경제실정을 고려했을 때, 적절한 무기체계 선정과 신속하고 효율적인 국방획득제도가 절실한 시점이다. 이러한 측면에서 적절한 무기체계 선정과 이를 견인할 수 있는 핵심기술 개발이 절실하다는 점에서 현재의 국방획득제도와 국방연구개발의 추진과정이 적절하게 진행되고 있는지 그리고 개선할 수 있는 좋은 방향을 모색하는 것에서 본 연구가 시작되었다. 본 논문에서는 현재의 국방연구개발이 효율적으로 진행되고 있는지에 대한 고민에서 발단이 되어 핵심기술이 개발되고 무기체계에 적용되는 현황, 핵심기술의 적절한 관리, 필요한 핵심기술이 기획되고 개발되는지에 대한 조사와 분석을 진행하여 핵심기술과 무기체계 개발 간 연결고리를 분석하고, 강화할 수 있는 획득시스템의 개선방안에 대해 이론적 연구를 실시하였다. 이를 통해 무기체계 개발과 핵심기술 개발 간 연계성 증대가 필요하다는 점과 핵심기술의 활용성의 극대화가 제도적으로 필요하다는 시사점을 도출할 수 있었다. 개선방안으로는 핵심기술 및 무기체계 소요기획을 통합할 수 있도록 장기무기체계 개념기획서라는 신규문서를 통해 목표지향적인 소요기획 분위기를 형성하고, 기획의 실효성 증대를 위한 사전기획연구 제도에 대한 방안을 연구하였다.
본 논문은 한국형 전투기 개발 시 적의 위협에 대한 취약성 분석을 위해 요구되는 고속 관통자가 표적을 관통하는 기구에 대해 수치 해석적으로 연구한 결과이다. 표적은 1 mm~6.3 mm 두께를 갖는 준 무한평면의 알루미늄(Aluminum) 2024 재질을 고려하였다. 관통자는 반구형 노즈 형상을 갖는 강(steel) 재질로, 입사속도는 350~3353 m/s까지, 질량은 0.32~16 g까지 갖는 것으로 고려하였다. 수치해석을 위해 사용된 실 사격 데이터는 THOR 방정식으로부터 추정하여 유추하였다. 수치해석 결과 표적을 관통하는 과정에서 관통자의 탄도한계속도는 관통자의 질량에 대한 지수 함수적으로 감소하는 수식으로 형식화(closed form of formalization) 하였다. 관통 후 잔류속도 및 잔류질량은 표적의 두께와 관통자의 질량 및 입사속도에 의존된 지수 함수적으로 감소하는 수식으로 각각 형식화하였다.
최근 정보통신기술의 발달에 따른 공공 자전거 시스템 운영 사례가 증가하고 있다. 대도시의 공공 자전거 시스템은 시민에 대한 공공성과 편리성을 모두 확보해야하기 때문에, 도입부터 운영까지 다양한 이슈에 대한 분석이 필요하다. 또한, 최근 라스트 마일 수단으로 각광받고 있는 개인 모빌리티 사업과의 공존을 위한 다양한 시나리오 역시 대비할 필요가 있다. 본 논문은 공공 자전거 시스템의 효율적 운영 관리를 위한 시뮬레이션 모델을 제안한다. 특히, 제안한 방법은 공공 자전거 시스템의 일반적인 구조와 행태를 모델링 하여 다른 도시에 쉽게 활용할 수 있는 형태로 개발하였고, 컴포넌트 기반의 모델 구성으로 향후 모델의 수정 및 확장이 용이하도록 개발하였다. 본 논문에서는 제안된 방법의 사례로 세종시 공공 자전거 시뮬레이션을 수행하였다. 세종시 공공 자전거 시스템의 데이터를 적용하여 시뮬레이션 결과를 도출하고, 도출된 결과를 세종시 실데이터와 비교하여 검증하였다. 검증된 모델을 이용하여, 세종시에 적합한 공공 자전거 서비스를 설계하고 분석할 수 있는 도구로 활용될 수 있을 것으로 기대한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.