• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.38-44
• /
• 1999

This paper primarily directed toward analyzing the frequency response in hydraulic pipe lines with a small diameter. The exact solution to the frequency response is obtained by using the complicated transfer function. The discrepancy with the exact and the approximate is small so the approximation solution is adopted to compare the experimental results with the theoretical analysis. In this experiment the input frequency was generated by the frequency generator with the ball valve and speed controller. In order to compare the theoretical were forms with the experimental ones the trace obtained from the oscilloscope is photographed, The diameter the length of lines and input pressure amplitude are varied to investigate their effects,. the experiment results show that th values of dimensionless parameter are very affected to the phase delay and guide response time in the design of pressure manifold to measure the pressure of hydraulic pipelines.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.3
• /
• pp.20-24
• /
• 2006

Air balancer is a conveyance cargo-handling machine, used in assembly and process lines of car and machining industries. This can lift up an object, the weight of which is from 5 to 200 kg, and moves it to a position. As industrial technologies evolve, it is required to move an object and fit it into a specified position with greater accuracy, rather than performing simple tasks such as lifting objects up and down as conventional ones do. There is also a demand to handle an object with one hand, rather than with two hands,. Through designs of manifold unit for an air balancer function, pilot regulator unit to keep pressure constant, hand unit for an accurate load perception function, and air balancer circuit, this study enables everybody to work it with ease and convenience. Experiments and comparisons were conducted for the performance evaluation of the circuit.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1087-1090
• /
• 2005

In precision machinery systems for medical and chemical applications, micropumps with a low pulsation have been demanded and investigated for accurate delivery of a small amount of liquid. This study proposes sheet type check valves instead of ball type check valves for PZT pumps and performs some tests on dynamics characteristics of check valves having different design parameter with variable frequency. The selected materials of check valves is NBR, PP film, Polyimide and Stainless steel(SUS304). In the experiment, dynamic characteristics of stainless steel thin plate have better performance than others.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.647-650
• /
• 2001

In case of bent axis type axial piston hydraulic pump or motor, hydrostatic bearing used to achieve the lubrication effect on the mechanical sliding contact areas between the following pairs ; piston shoe and swash plate, valve plate and cylinder block, piston and cylinder block, etc. In this research, we designed two pairs of spherical ball joint in witch connecting rod piston end. The one is not hydrostatic bearing, the other is designed with spherical hydrostatic bearing in point of view minimum pumping power loss. By varying supply pressure on the piston, we can know that it is possible to reduce the friction torque by using hydrostatic bearing designed one. Finally, by comparing the results of driving torque between the two models, it was verified that the spherical hydrostatic bearing is well designed.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.6-11
• /
• 2019

In this study, we constructed the mathematical model to evaluate the roundness for plastic injection mold parts with complicated 3D curvatures. Mathematically we started off from the equation of circle and successfully derived an analytical solution so as to minimize the area of the residuals. On the other hand, we employed the numerical method the similar optimization process for the comparison. To verify the mathematical models, we manufactured and used a ball valve type plastic parts to apply the derived model. The plastic parts was fabricated under the process conditions of 220-ton injection mold machine with a raw material of polyester. we experimentally measured (x, y) position using 3D contact automated system and applied two mathematical methods to evaluated the accuracy of the mathematical models. We found that the analytical solution gives better accuracy of 0.4036 compared to 0.4872 of the numerical solution. The numerical method however may give adaptiveness and versatility for optional simulations such as a fixed center.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.14 no.1
• /
• pp.31-38
• /
• 1985

By using the hollow shaft with $0.5^{\circ}$ internal taper, ball valve and rubber packing, charging the working fluid at engineering vacuum degree (vacuum pressure higher than 1 torr) and carrying out experiments, it was investigated the performance of rotating heat pipe with variant operating conditions. In this experiment, it was shown that it is impossible the internal liquid flow was laminar film flow which agree with the assumption of present theoretical analyses, but the internal vorticity makes the heat transfer increase and for the maximum heat transfer there is optimal mass loading for the given heat pipe geometry and operational conditions.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2002

The purpose of this study is to maintain high efficiency and reasonable use of cool thermal storage systems operated in the domestic building sector. As the result of efficiency test from the five types of operated cool storage systems on the condition that COP ranges are 2.6 to 3.4 during the day time and 2.1 to 3.0 during the night time and it decreased by more than 30% of rated COP given 3.8 to 3.0. The Analysis of cool storage rate shows that only 3 (21.4%) systems out of 15 buildings hold to over 40% capacity for its total capacity. To prevent the decrease in operating efficiency, it should correct the malfunction of 3-way valve and expansion valve and the mistake of control values for schedule program and increase cooling tower capacity. In order to improve piping line, it needs bypass brine line off refrigerator, separation of chilled water line with Ice Slurry system at day and night time and speed control of chilled and warm water pumps. This study does require the more studies on improving difficulty of increasing cooling load with Ice on Coil system, waterproofing with Ice Ball system, COP drop during the night time with Ice Lens, low operating temperature during the day time with Ice Slurry and increasing of Power loss due to hot gas de-icing with Ice Harvest in the future.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.6
• /
• pp.597-602
• /
• 2001

A 47-years-old woman presented with a 2-month history of a dry mouth and dry cough. The patient had been taking medication for Sj$\ddot{o}$gren's syndrome for approximately 7 years. The chest radiography showed multiple cystic lesions and a hazy density in both lower lung fields. The HRCT showed a diffuse ground glass like appearance and multiple variable sized cystic lesions in both lung fields. After medication, the symptoms were aggravated. Bronchoscopy was preformed with a transbronchial lung biopsy. The biopsies showed an infiltration of lymphocytes, neutrophils, monocytes and histiocytes through the interstitial space of the alveola and a widening of the alveolar septa. However, the histological findings of the cysts were not obtained. Sj$\ddot{o}$gren's syndrome is a slowly progressive inflammatory autoimmune disease, which is characterized by lymphocyte mediated destruction of the exocrine glands, with pulmonary involvement in approximately 19-65%, High-resolution CT is a sensitive technique for assessing the pulmonary involvement in patients with Sj$\ddot{o}$gren's syndrome. Although a lung biopsy is not always necessary for establishing a diagnosis of an interstitial lung disease in Sj$\ddot{o}$gren's syndrome. A lung biopsy may reveal a wide spectrum of changes ranging from a mild inflammatory response to end stage fibrosis with honeycombing. Because of the predominantly peribronchiolar inflammatory infiltration and inspissated secretions the cysts were suspected to have been formed by the ball-valve phenomen. However, no definite evidence was obtained.

• Journal of Chest Surgery
• /
• v.12 no.1
• /
• pp.33-42
• /
• 1979

The present study reports 41 cases of congenital and acquired heart diseases, who received open heart surgery under extracorporeal circulation [ECC] by Sarns Heart-Lung-Machine [HLM] at the Department of Thoracic and Cardiovascular Surgery, Hanyang University Hospital during the` period between July 1975 and February 1979. The priming of pump oxygenator was carried out by the hemodilution method using Hartman`s solution, whole blood, and fresh human plasma. The rate of hemodilution was in the average of 50.8 ml/kg. ECC was performed at the average perfusion flow rate of 85.0 ml/kg/min [2.43 L./ kg/2] and at moderate hypothermia. In the total cardiopulmonary bypass, arterial pressure ranged between 55 mmHg and 90 mmHg, but generally maintaining over 70 mmHg. Patient age ranged between 2 and 54 year old, in congenital heart diseases, between 2 and 28, in acquired heart diseases, between 17 and 54 Sex ratio of male to female was 20:21. The cases include a case of pulmonary valvular stenosis, 4 cases of atrial septal defect, 9 cases of ventricular septal defect, 9 cases of tetralogy of Fallot, 5 cases of pentalogy of Fallot, 3 cases of atypical multiple anomalies 7 cases of mitral stenosis or insufficiency, a case of myxoma in left atrium, and a case of ruptured aneurysm of Valsalva`s sinus. The surgical managements were 16 valvulotomy for pulmonary valvular stenosis, 2 Teflon patch graft closure and 5 simple suture closure of atrial septal defect, 16 Teflon patch graft closure and 5 simple suture closure of ventricular septal defect, 12 pericardial patch graft for infundibular stenosis of right ventricle, one anastomosis between left superior vena cava and right atrium, 2 open mitral commissurotomy, 5 mitral valve replacement using Starr-Edward`s ball valve, porcine xenograft by Hancock, by Carpentier-Edward, or Angell-Shiley, one removal of left atrial myxoma, and a repair of ruptured aneurysm of Valsalva`s sinus. Four [9.7%] out 41 cases expired postoperatively and the rest of 37 cases survived with satisfactory results. The causes of death were one coronary embolism in tetralogy of Fallot, 2 postoperative lower cardiac output in atypical multiple anomalies, and one right heart failure in large: ventricular septal defect with pulmonary hypertension.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.459-469
• /
• 2017

A real scale leakage test facility was developed to study the leak signal characteristics of water supply pipelines, and then leak tests were carried out. The facility was designed to overcome the limited experimental circumstances of domestic water supply pipeline experimental facilities. The length of the pipeline, which was installed as a straight line, is 280m. Six pipes were installed on a 70m interval with different pipe material and diameters that are DCIP(D200, D150, D100, D80), PE(D75) and PVC(D75).The intensity of the leakage is adjusted by changing the size of the leak hole and the opening rate of ball valve. Various pressure conditions were simulated using a pressure reducing valve.To minimize external noise sources which, deteriorate the quality of measured leak signal, the facility was built at a quiet area, where traffic and water consumption by customers is relatively rare. In addition, the usage of electric equipment was minimized to block out noise and the facility was operated using manual mode. From the experimental results of measured leakage signal at the facility, it was found that the signal intensity weakened and the signal of high frequency band attenuated as the distance from the water leakage point increased.