• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1290-1298
• /
• 2000

Turbo Code decoder is an iterate decoding technology, which extracts extrinsic information from the bit to be decoded by calculating both forward and backward metrics, and uses the information to the next decoding step Turbo Code shows excellent performance, approaching Shannon Limit at the view of BER, when the size of Interleaver is big and iterate decoding is run enough. But it has the problems which are increased complexity and delay and difficulty of real-time processing due to Interleaver and iterate decoding. In this paper, it is analyzed that MAP(maximum a posteriori) algorithm which is used as one of Turbo Code decoding, and the factor which determines its performance. MAP algorithm proceeds iterate decoding by determining soft decision value through the environment and transition probability between all adjacent bits and received symbols. Therefore, to improve the performance of MAP algorithm, the trust between adjacent received symbols must be ensured. However, MAP algorithm itself, can not do any action for ensuring so the conclusion is that it is needed more algorithm, so to decrease iterate decoding. Consequently, MAP algorithm and Turbo Code performance are analyzed in the nongaussian channel applying Robust equalization technique in order to input more trusted information into MAP algorithm for the received symbols.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.507-514
• /
• 2018

TSI (TPI-Slope Index) which is the combination of TPI (Topographic Position Index) and slope was newly proposed for landslide and applied to a landslide susceptibility model. To do this, we first compared the TPIs with various scale factors and found that TPI350 was the best fit for the study area. TPI350 was combined with slope to create TSI. TSI was evaluated using logistic regression. The evaluation showed that TSI can be used as a landslide factor. Then a logistic regression model was developed to assess the landslide susceptibility by adding other topographic factors, geological factors, and forestial factors. For this, landslide-related factors that can be extracted from DEM (Digital Elevation Model), soil map, and forest type map were collected. We checked these factors and excluded those that were highly correlated with other factors or not significant. After these processes, 8 factors of TSI, elevation, slope length, slope aspect, effective soil depth, tree age, tree density, and tree type were selected to be entered into the regression analysis as independent variables. Three models through three variable selection methods of forward selection, backward elimination, and enter method were built and evaluated. Selected variables in the three models were slightly different, but in common, effective soil depth, tree density, and TSI was most significant.

• Korean Journal of Cognitive Science
• /
• v.20 no.4
• /
• pp.383-419
• /
• 2009

This study investigates the developmental process of Korean postverbal negation in a Korean-English bilingual child. The purposes of this study are firstly to find both common and divergent paths in the development of Korean postverbal negation in terms of both syntactic development and pragmatic uses of postverbal negation; and secondly to investigate explanations for the special pattern of development observed. The data were collected from one bilingual child (R) who is simultaneously acquiring two languages, Korean and English over two years between the ages of 5;00 and 700 (years; months). The data collection was carried out in four periods in two different environments: Periods I and III in Australia, Periods II and IV in Korea. The development of postverbal negation showed that when R was in Australia, she employed both L1 and L2 learning mechanisms, while when she was in Korea, she employed L1 learning mechanisms. The results reveal that L1 and L2 mechanisms are not basically different because R shows both forward and backward developmental features in conjunction with the two different language environments: Korea and Australia.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.185-197
• /
• 2001

Recently, the design method by VHDL coding and synthesis has been used widely. As the integration ratio increases, the amount design by VHDL at a time also increases so many coding errors occur in a design. Thus, lots of time and effort is dissipated to detect those coding errors. This paper proposed a method to verify the coding errors in VHDL behavioral-level designs. As the methodology, we chose the method to detect the coding error by applying the generated set of verifying patterns and comparing the responses from the error-free case(gold unit) and the real design. Thus, we proposed an algorithm to generate the verifying pattern set for the coding errors. Verifying pattern generation is peformed for each code and the coding errors are classified as two kind: condition errors and assignment errors. To generate the patterns, VHDL design is first converted into the corresponding CDFG(Control & Data Flow Graph) and the necessary information is extracted by searching the paths in CDFG. Path searching method consists of forward searching and backward searching from the site where it is assumed that coding error occurred. The proposed algorithm was implemented with C-language. We have applied the proposed algorithm to several example VHDL behavioral-level designs. From the results, all the patterns for all the considered coding errors in each design could be generated and all the coding errors were detectable. For the time to generate the verifying patterns, all the considered designed took less than 1 ［sec］ of CPU time in Pentium-II 400MHz environments. Consequently, the verification method proposed in this paper is expected to reduce the time and effort to verify the VHDL behavioral-level designs very much.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.175-193
• /
• 2010

This paper has two objectives. One is to understand status of the distribution industry in Korea and compare it with industrialized countries. The other is an attempt to apply input-output(I-O) analysis to investigate the economic impacts of the distribution industry in the national economy for the year 2008. In the economy as a whole, the distribution industry represented about around 15 per cent employment and accounted for near 8 percent in GDP. The employment portion of the distribution in overall industry is almost same that of US, UK, and Japan, but shared portion in GDP is at least 3 per cent below these countries. Next, a static I-O framework is employed, focusing on two topics in its application. First, the impacts of the product or investment in the distribution industry on the product, value-added, and employment of other sectors are explored by using demand-driven model. Second, the national economic impacts of the distribution industry in Korea are looked into by using open model and inter-industry analysis. It can be summarized that the distribution industry has a high production-inducing effect, more worker and employment-inducing effect, a high forward and a low backward linkage effect. Finally, the implications and limitations of this study are discussed.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.97-108
• /
• 2006

C. H. OH, S. N. CHOI, T. G. NAM, The Kinematic Analysis of the Tennis Flat Serve Motion, Korean Jiurnal of Sports Biomechanics, Vol. 16, No. 2, pp. 97-108, 2006. By the comparison and the analysis of the different factors during the tennis flat serve motion such as the required time per section, the movement displacement of the racket, the velocity of the upper limbs joints, the physical center of gravity, and the angle and the angular velocity of the upper limbs joints between an ace player and a mediocre player, these following results were drawn. First, the experiment result of the total time required per section in a tennis flat serve motion showed that an ace player was faster than a mediocre player by 0.4 seconds. This result suggested that it was required to increase the speed of the racket head by a swift swing to perform an effective flat serve motion. Second, the experiment result of the movement displacement of the racket in the tennis flat serve motion showed that an ace player greatly moved toward the left side on an x-axis. But both an ace and a mediocre player were shown to be at the similar points on a y-axis at the moment of the impact of the racket. An ace player was also shown to be located at a higher position on a z-axis by 0.23m. Third, the velocity of the center of gravity of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fourth, the velocity of the upper limb joints of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fifth, the experiment result of the speed of the racket head in tennis flat serve motion showed that a mediocre player was faster than an ace player in the first phase, but the latter was faster than the former in the second, third, and the fourth phases. Sixth, at the moment of impact of a tennis flat serve, an ace player had greater flexion of the angle of the wrist joints by an 11.8 degree than a mediocre player. An ace player also had greater extension of the angle of the elbow joint and the shoulder joint respectively by a 5.2 degree and a 1.4 degree with a mediocre player. Seventh, an ace player had greater angular velocity of the upper limb joints and the hip joints than a mediocre player at the moment of the impact of tennis flat serve. Eighth, an ace player was shown to have a greater change of the forward and the backward inclination (or the anterior and posterior inclination) of the upper body

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.2
• /
• pp.126-135
• /
• 2015

The purpose of this study was to evaluate the skeletal and dentoalveolar effects of facemask therapy and to compare the anchorage of a bonded expander in patients with Class III malocclusion and different vertical skeletal patterns. Twenty subjects with Class III malocclusion were included in this study and were treated with a facemask and bonded expander. Based on the FMA, subjects were divided into two groups of 10 patients each: a high vertical group (HV; mean FMA $33.56^{\circ}$) and an average vertical group (AV; mean FMA $24.88^{\circ}$). Lateral cephalograms were taken and evaluated before and after treatment. In both groups, forward movement of the maxilla and backward rotation of the mandible were observed after treatment, with no statistical differences between the groups. Vertical skeletal variables increased in both groups, but the increase of FMA was significantly larger in the HV group than the AV group. Mesial movement of maxillary molars and proclination of maxillary incisors which indicate anchorage loss of bonded expander were observed in both groups, with no significant differences between the groups. In conclusion, facemask therapy resulted in effective maxillary protraction in both HV and AV groups. However, the open bite tendency was increased more in the HV group.

• Journal of Hospice and Palliative Care
• /
• v.22 no.3
• /
• pp.134-143
• /
• 2019

Purpose: This methodological study was conducted to test the reliability and validity of an instrument that measures attitudes of advance directives (ADs) among nurses. Methods: 1) Sixteen items related to attitudes in the English version of the Knowledge, Attitudinal, and Experiential Survey on Advance Directives (KAESAD) were forward/backward translated into Korean. 2) The content was validated by an expert panel (three nursing professors and eight hospice nursing specialists). 3) The preliminary 12 items were selected as a tool to assess the Korean version of Nurses' Attitudes towards Advance Directives (NAAD-K). 4) The instrument was validated by a survey (n=216). 5) It was confirmed to use the 12 items for the final version of the instrument. Results: NAAD-K was shown to be valid in terms of factors, items and content. The three factors extracted from the factor analysis were named as follows: Caring for patients with an AD (factor 1), nurses' role in informing patients (factor 2) and patient right (factor 3). The three factors explained total variance 57.796%. Factor loadings of the 12 items ranged from 0.47 to 0.93. For the 12 items, Cronbach's alpha was 0.81, and Guttman split-half coefficient was 0.78. Conclusion: This instrument was identified to be applicable with satisfactory reliability and validity for further use in measuring nurses' attitudes towards ADs in hospice and palliative care.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.643-655
• /
• 2000

In Patients with severe skeletal discrepancy, surgical orthodontic treatment must be accompanied, and recently two jaw surgery has become a common procedure, resulting in improved esthetics and function. Choosing the position of the occlusal plane in this two jaw surgery is an important factor in postoperative stability Therefore this must be taken into consideration during the diagnosis and treatment plan. In this study, among patients with skeletal Class III occlusion, 25 patients(8 male, 17 female, average age $23.2{\pm}3.17$) who have undergone two jaw surgery, setting the ideal occlusal plane according to Delaire's architectural and structural cranial analysis. In comparing preoperative($T_1$). postoperative($T_2$, average of 15.4 days), and long-term postoperative($T_3$, average of 32.6 months) lateral cephalometric radiography, the following conclusions have been made. 1. There were no significant changes of the occlusal plane angle after the two jaw surgery, and there were no significant differences between the surgical technique(SSRO and IVRO). 2. The postoperative changes of the occlusal Plane had no relationship with the amount of jaw movement, amount of posterior impaction, nor the time relapse after surgery. 3. After two jaw surgery, in the SSRO group there was significant forward movement of the mandible, and in the IVRO group the lower incisors extruded as the mandible moved backward and downward which makes the genial angle and the mandibular plane angle significantly increased

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.113-121
• /
• 2007

The purpose of this study was to determine the effect of three different plates($0^{\circ}$, $10^{\circ$}, $20^{\circ}$)under heels on the lower limb muscles and erector spinae during squat exercise. Ten high school korean traditional wrestling players(age: $18.5{\pm}0.7$, weight: $1972.2{\pm}128.5N$, height: $177.8{\pm}6.0cm$, weight of barbell: $1004.5{\pm}132.4N$) performed squat exercise using three different tilting plates under heels at a cadence of 40beats/sec with 80% one repetition maximum load. Surface electrodes were placed on the participants' left and right erector spinae, and rectus femoris, vastus medialis, vastus lateralis, tibialis anterior, biceps femoris, medial gastrocnemius, and lateral gastrocnemius in the right lower extremity. One S-VHS camcorder(Panasonic AG456, 60fields/s) was placed 10m to the side of the participant. To synchronize the video and EMG data, a synchronization unit was used for this study. Average and Peak IEMG values were determined for each participant. For each variable, a one-way analysis of variance was used to determine whether there were significant differences among three different tilting plates under heels. When a significant difference was found in plates type, post hoc analyses were performed using the Tukey procedure. A confidence level of p<.05 was used to determine statistical significance. As a result of this study, maximum nEMG values of the tibialis anterior in $0^{\circ}$ plates was significantly higher than the corresponding values for the other plates during the knee extension. This increased activation in the tibialis anterior muscle indicates an increase in displacement of center of gravity of body. It is very likely that additional muscle activation are needed to stop the forward and backward movement. The results also showed that muscular activities of quadriceps femoris and erector spinae were decreased with increasing angle of plates. This suggests that increasing angle of plate may help to sustain the balance and posture of squat exercise. It is considered that very few significant differences were found among three different plates($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) since elite players with much experience in squat exercise, were chosen as a participant of this study. In order to obtain meaningful results regarding the tilting angle of heel plates in squat exercise, kinetic and 3D kinematic analysis will be needed in the future study.