• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.70-73
• /
• 2007

The forming characteristics of cup-rod combined extrusion process were investigated with process parameter change. Simultaneous forward rod extrusion and backward cup extrusion was conducted with magnesium alloy, AZ31B. Process parameters such as forward extrusion ratio, backward extrusion ratio, and working temperature were controlled in a specific region and the effects of the parameter change were examined. Surface crack was developed in a certain state of the process parameters combination. The crack-free forming limit of the alloy in the combined process was disclosed by the parameter study. The microstructures of the initial and extruded workpieces were observed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.1-12
• /
• 2001

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. Finally, the model experiment results are in good agreement with the FE simulation ones.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1366-1375
• /
• 2002

In cold forging of piston-pin for automobile parts, the flow defect appears by the dead metal zone. This appearance evidently happens in products with a thin piercing thickness for the dimension accuracy and the decrease of material loss. The best method that can prevent flow defect is removing dead metal zone. The purpose of this study is to investigate the material flow behavior of forward-backward extruded piston-pin through the relative velocity ratio and the stroke control of upper moving punch & container using the flow control forming technique. The finite element simulations are applied to analyse the flow defect, then the results are compared with the plasticine model material experiments. The model experiment results are in good agreement with the FE simulation ones.

• 한국컴퓨터산업학회논문지
• /
• 제5권2호
• /
• pp.293-300
• /
• 2004

본 논문에서는 MPEG 스트림에 대하여 VCR과 같은 기능을 제공하고 저장 공간을 최소화하는 알고리즘을 제안하였다. 특히 MPEG 스트림을 여러 개의 디스크에 효과적으로 스트라이핑 하는 방법과 전체 디스크에 걸쳐 분산되어 있는 스트림을 검색하기 위한 접근방안을 제안하였다. 제안된 알고리즘에 대한 실험을 통하여 VOD 서버가 FF/FB기능을 제공하는 경우에 필요한 추가적인 저장 공간을 감소시킬 수 있음을 확인하였다.

• 산업공학
• /
• 제10권3호
• /
• pp.125-132
• /
• 1997

We proposed a 2-step neural network approach for estimating machining parameters of electric discharge wire cut. The first step net, which is described as a backward neuro-estimation, is designed for estimating coarse cutting parameters while the second phase net, as a polishing forward neuro-estimation, is utilized for determining fine parameters. Sequential estimation procedure, based on backward and forward net, is performed using the net's approximation capability which is M to 1 and 1 to M mapping property. Experimental results an given to evaluate the accuracy of the proposed 2-step neuro-estimation.

• 한국운동역학회지
• /
• 제18권3호
• /
• pp.71-82
• /
• 2008

본 연구의 목적은 $20^{\circ}$ 경사로에 서 앞 뒤 보행 동작 시 지면반력 형태를 비교 분석하고자 한다. 본 연구를 위해서 두 대의 지면 반력기를 통해 전 후, 좌 우, 수직 지면반력값, 최대값, 최소값, 평균값 압력 중심 변위, 부하율과 감소율을 측정하였다. BD보행 시 RTO 시점에서 수직 지면반력값이 FU 보행에 비해 유의하게 높은 수치를 보인 반면, $RHC_2$ 시점에서는 더 낮은 수치를 보였다. 이는 보행 동작의 차이와 보행 시 발목과 무릎의 위치 변화, 무게 중심의 변화가 지면 반력의 형태에 직접적인 영향을 미치는 것으로 판단되어진다. 전 후 압력중심변위는 하향 보행 시 상향 보행에 비해 낮은 변화를 보였는데 이는 하향 시 생기는 불안정성을 상쇄하기 위해 더 강한 제동력이 발생되어 진 것으로 사료되어 진다. BD보행 시 부하율이 다른 보행에 비해 낮은 것을 알 수 있는데 이러한 결과를 통해 등산로에서 후방 보행 동작이 하지 근골격계에 지속적인 스트레스를 감소시켜 상해를 예방할 수 있는 방법으로 제시될 수 있을 것이다.

• 스마트미디어저널
• /
• 제12권3호
• /
• pp.30-37
• /
• 2023

Alzheimer's disease (AD) symptoms are being treated by early diagnosis, where we can only slow the symptoms and research is still undergoing. In consideration, using T1-weighted images several classification models are proposed in Machine learning to identify AD. In this paper, we consider the improvised feature selection, to reduce the complexity by using wrapping techniques and Restricted Boltzmann Machine (RBM). This present work used the subcortical and cortical features of 278 subjects from the ADNI dataset to identify AD and sMRI. Multi-class classification is used for the experiment i.e., AD, EMCI, LMCI, HC. The proposed feature selection consists of Forward feature selection, Backward feature selection, and Combined PCA & RBM. Forward and backward feature selection methods use an iterative method starting being no features in the forward feature selection and backward feature selection with all features included in the technique. PCA is used to reduce the dimensions and RBM is used to select the best feature without interpreting the features. We have compared the three models with PCA to analysis. The following experiment shows that combined PCA &RBM, and backward feature selection give the best accuracy with respective classification model RF i.e., 88.65, 88.56% respectively.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2199-2205
• /
• 2012

본 논문은 속도변화에 따른 후방보행 훈련이 하지의 넙다리 근육에 미치는 영향을 알아보기 위한 것으로 30명의 대상자를 무작위로 세 집단; 실험군I(전방보행 5km/h: 10명), 실험군II(후방보행 5km/h: 10명), 실험군III(후방보행 2.5km/h: 10명)으로 나누어 실험하였다. 실험은 4주간 주 4회 30분씩 실시하였으며 실험 전과 실험 4주 후에 각 실험군의 넙다리곧은근의 활성도와 넙다리네갈래근의 근력을 측정하였다. 연구의 결과 넙다리곧은근의 활성도는 전방 보행 군보다 후방보행 군에서 더 의미 있는 변화를 보였으며 실험군III보다 실험군II에서 더 의미 있는 변화를 나타냈다. 넙다리네갈래근의 근력 또한 전방보행 군보다 후방보행 군에서 더 의미 있는 변화를 보였으며 실험군III보다 실험군II에서 더 의미 있는 변화를 나타냈다. 이상의 결과에 따라 후방보행이 전방보행에 비해 넙다리 근육의 근 활성도와 근력에 보다 효과적이라고 할 수 있으며 초기 재활에서 느린 속도의 후방보행이 효과적으로 활용될 수 있음을 알 수 있다.

• Physical Therapy Rehabilitation Science
• /
• 제8권2호
• /
• pp.61-66
• /
• 2019

Objective: The purpose of this study was to investigate the effects of resistance applied in various directions on lower extremity muscle activity and balance during squat exercise performance. Design: Cross-sectional study. Methods: Forty-one adults (19 males and 22 females) agreed to the study purpose and procedures. All subjects randomly performed squat exercises with an intensity of overcoming 10% of body weight resistance pulled forward, backward and general squats with $60^{\circ}$ of knee joint flexion. Electromyography was used to measure muscle activity of the vastus medialis oblique (VMO), rectus femoris (RF), vastus lateralis oblique (VLO), biceps femoris (BF), and semitendinosus (ST) muscles. The Wii Balance Board was used to assess balance during the three-method squat operation. Each operation was measured three times for 10 seconds. Results: There were significant differences in muscle activities of the VMO, RF, VLO, ST and balance ability with the application of three directions of resistance (p<0.05). Post hoc comparisons revealed that squats performed with resistance pulled in the backward direction resulted in higher VMO, RF and VLO activity than with the resistance placed in a pulled forward direction (p<0.05). In the ST, resistance applied in the pulled forward direction showed greater muscle activity compared to the pulled backward direction (p<0.05). With balance, squats performed with resistance pulled in the forward direction showed greater muscle activity than with resistance applied in the pulled backward direction and during general squat performance (p<0.05). Conclusions: In this study, squat exercises performed with resistance applied in the direction of pulling backwards was found to be the most effective in improving quadriceps muscle strength and balance. It is effective to provide resistance that is placed in the forward when it is difficult to perform a general squat due to weakness of the quadriceps.

• ETRI Journal
• /
• 제27권2호
• /
• pp.206-218
• /
• 2005

We measure and compare externalities of IT and R&D capital stocks in different Korean industry sectors using inter-industry input-output tables of 1985, 1990, 1995 and 2000. We also compute the multiplier effects that relate to the directions of future economic effects. The key findings are as follows. First, we observed continuous capital deepening in all nine industries over the period of 1985 to 2000. Second, the backward multipliers of IT capital were the highest in the manufacturing industry. As for inter-industry externalities, the indirect backward multipliers, which exclude intra-industry backward multiplier effects within the industry, were also the highest in the manufacturing industry. Third, the forward multiplier effects of IT capital stock were the most substantial in the construction industry during the 1980s and in the manufacturing industry thereafter. Finally, using the transition multiplier matrix reflecting the backward effects of the two capitals in the past, the economic backward effects, especially the external economic effects, are predicted to increase through 2010 among all industries. The above findings suggest that, in order to maximize the forward and backward effects of the ever-increasing IT capital, we need to formulate an industry policy reducing the cost of capital accumulation in the manufacturing industry through improvement in productivity of the IT industry.