• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.441-442
• /
• 2009

A wavelength multiplexing based stereoscopic 3D-LCD will be introduced. A new 120 Hz scanning RGB-backlight unit was developed. This backlight module was combined with a standard 120Hz LCD. The 3D-LCD based on interference filter glasses offers an outstanding channel separation and a wide viewing angl.

• 한국광학회지
• /
• 제30권3호
• /
• pp.101-105
• /
• 2019

LCD의 광 효율을 향상시키기 위해 LCD backlight unit (BLU)의 광원으로 적색, 녹색, 청색의 광원을 사용하였으며, RGB 광은 lenticular lens array (LLA)를 통해 집광되어 각각 컬러 필터의 적색, 녹색, 청색 필터에 색일치되는 조건으로 광이 지나도록 설계하여 시뮬레이션하였다. 광원의 위치에 따라 Type-A와 Type-B 두 가지 방식으로 시뮬레이션을 진행하였으며, 그 결과 LLA를 사용하지 않았을 때와 비교하여 Type-A는 휘도가 210%로 상승하였으며, Type-B는 270% 상승함을 확인하였다. LLA의 최적의 조건은 렌즈의 높이가 $25{\mu}m$, 렌즈 간의 간격이 $3{\mu}m$일 때, 효율이 최대가 됨을 확인하였다.

• 한국위성정보통신학회논문지
• /
• 제11권3호
• /
• pp.28-31
• /
• 2016

본 연구에서는 최근 의료용으로 많이 사용되고 있는 고휘도, 고균일도의 직하광원구조를 가지는 백라이트 유닛에 대한 설계 시뮬레이션을 실시하였다. 직하형 백라이트 시스템은 기존의 Edge-Lighr 방식에 비해서 고휘도 및 고균일도를 달성할 수 있어 의료용 판독이 요구되는 고품질의 디스플레이에 사용되고 있으며, 흑백이미지를 바탕으로 진단을 실시하는 경우가 많기 때문에 휘도 및 휘도 균일도에 대한 높은 성능이 요구되는 분야이다. 본 연구에서는 복수 개의 램프를 수평으로 배열한 경우에 각 램프간의 거리 및 반사판과의 거리, 상측 확산판과의 거리에 대한 최적설계를 실시하고, 이 결과를 바탕으로 실물과 유사한 조건에서 시뮬레이션을 실시하였다. 연구 결과, Parameter 에 의존하는 변수를 최적화 할 수 있었으며, 4.5mm 의 램프와 반사판 거리 및 26mm 의 램프간 거리를 바탕으로 16개의 램프를 배치하여, 32인치 크기의 화면에서 6423nit 의 중심휘도를 갖는 고품위의 우수한 광원의 설계가 가능함을 확인할 수 있었다.

• Journal of Information Display
• /
• 제5권1호
• /
• pp.7-15
• /
• 2004

A highly simplified backlight unit mainly composed of diffractive grating in sub-micron order imprinted light-guide plate (LGP) is proposed for edge-lit backlight unit. Optical characteristics of the imprinted LGP are examined by RCWA and the performance is verified through Monte Carlo simulation. Results show that the diffraction efficiency, luminous flux and its uniformity over the area are significantly affected by the angle of incident ray. Consequently couples of design considerations are additionally proposed to enhance luminous flux. In terms of peak luminance and out-coupling luminous flux, the experimental results are agreed well with the performance simulation. Finally, compared with optical characteristics of conventional backlight unit, we could conclude that the proposed simplified backlight unit made of diffractive grating imprinted light-guide plate is a good substitute for the conventional backlight unit.

• Transactions on Electrical and Electronic Materials
• /
• 제8권2호
• /
• pp.93-96
• /
• 2007

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1 W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14 W power consumption and start up voltage time is under the 15ms in the ambient temperature $-20\;^{\circ}C$.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.174-177
• /
• 2008

The luminance properties of FFL(Flat Fluorescent Lamp) backlights have been investigated in detail for the first time. The on-axis luminance gain as well as viewing-angle characteristics on various combinations of optical films were obtained from FFL backlight and compared to the results of conventional CCFL(cold-cathode fluorescent lamps) backlights. It was found that the on-axis luminance gains achieved by using optical films in the FFL backlight were lower than those in the CCFL backlight indicating that the recycling processes occurring between optical films and light sources/reflection sheet are not so effective in the FFL backlight due to the much larger area of, and thus higher absorption probability of the FFL. This result suggests that new optical films should be developed for FFL backlight and other flat-lamp backlight technologies.

• 소성∙가공
• /
• 제14권3호
• /
• pp.282-290
• /
• 2005

Nowadays, TFT-LCD is widely used as display unit of many digital devices. And, the backlight unit(BLU) is used as a light source of TFT-LCD module. In the backlight unit, the most important component is a light guide, which guides the input light to the TFT-LCD module uniformly. Recently, many researchers have focused on improving the efficiency of BLU by changing the design and structure of a light guide. In the present paper, a series of simulation was performed to find the optimal luminance distribution of emanated light from the given geometry as the first step. From the results of simulations for the light guide with given V-groove pattern, the emanated light from it is mostly affected by the groove angle. In the case of acute angle, about 74 degrees was found as optimal angle to satisfy the restrictions of angular luminance distribution, FWHM, the maximum luminance, etc. However, as far as the average luminance value was concerned, the case of 120 degrees(abtuse angle) was found to be the best while prism films were added to the BLU. As a next step the light guide samples of 74 and 120 degrees were manufactured by DSF method, which was recently proposed by the authors. Of course, most of design parameters were chosen by the aid of simulation results. Finally, the results of average luminance values were compared between the simulation and DSF molded samples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.940-941
• /
• 2015

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14W power consumption and start up voltage time is under the15ms in the ambient temperature $-20^{\circ}C$.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.49-53
• /
• 2009

In this study, a very small LED packaging lead frame with a low thermal resistance was developed. The cost of the package process was reduced by the use of many small LED lamps, which increased the light emission efficiency. Compared to the large lead frame lamp, however, the optical property of the small LED packaging lead frame lamp was not sufficiently improved because its reflection structure was changed and its reflection area was reduced. The luminous efficiency of the LED lamp reaches 58 lm/W at the current density of 0.16 A/$cm^2$. Using the LED lamps, 46-inch LCD BLU was manufactured. The BLU-made LED lamps have a low power consumption of 146 W and have a slim (10-mm-thick) BLU, keeping good uniformity in terms of brightness, and maintaining good thermal properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1156-1159
• /
• 2008

Local dimming driving has advantages in reducing power consumption and improving contrast ratio(CR). In an LED backlight unit(BLU), many small LED blocks are implemented in 2-dimmensional space, and luminance of the blocks is controlled by a local dimming algorithm. However, such a BLU can induce various recognizable artifacts. A new novel algorithm is proposed for exact block luminance calculation to correct local dimming artifacts. Also we discuss modified low-gray-level dimming to achieve much aggressive power saving in a local dimming BLU system.