• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1550-1551
• /
• 2005

In this paper, to improve the well-known photo conductivity degradation of amorphous silicon, a new LASER immersion treatment has been applied. The optical feedback control LED backlighting system with integrated LCD panel sensor increased the color variation less than 0.008 ${\Delta}u'v'$ compared to 0.025 for a non-feedback system.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.504-509
• /
• 2006

Currently, most of TDIS(Train Destination Indicator System) is operated colored-LED type equipment in Korea. This current LED type TDIS equipment has not graceful display and causes passenger's fatigues because of the LED module inherent characteristics as a display light source, high power consumption, high operating and maintenance costs, and et al. To address these several, we are developed new colored-LCD type TDIS equipment. According to our developed new TDIS equipment, we can achieve high resolution and graceful color stone of information display. Thus high graded service are able to provide to passengers. In addition, LCD module decreases power consumption, and it can be used permanently by changing only backlight in comparison with conventional equipment. Therefore we can decrease the maintenance cost and extend durability-period of TDIS equipment using new equipment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.191-192
• /
• 2015

본 논문은 고승압 컨버터의 고밀도화를 위해 Boundary Conduction Mode(BCM)로 동작하는 고주파 전압 클램프 탭 인덕터 부스트 컨버터를 제안한다. 제안된 회로는 모든 반도체 소자가 특정 전압에 클램프 되므로 기존 고승압 탭 인덕터 부스트 컨버터에 비해 손실 스너버가 없어 고효율에 유리하고 전압 스트레스가 낮은 장점을 갖는다. 또한 BCM 동작으로 인해 영전압 스위칭이 보장될 뿐만 아니라 전압 클램프 탭 인덕터에 의해 다이오드 역회복 문제를 해결할 수 있어 1MHz의 고주파 구동이 가능하다. 따라서 전원회로에서 큰 부피를 차지하는 리액티브 소자의 사이즈를 대폭 감소시킬 수 있어 고밀도 전원회로의 구현이 가능한 강점을 갖는다. 제안 회로의 타당성 검증을 위하여 이론적인 분석과 LED TV Backlight 구동용 20W급 시작품의 실험 결과를 제시한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.459-460
• /
• 2006

RGB 3색 LED를 이용 백라이트에서는 백색 광원을 구현을 위해서는 혼색을 위한 충분한 공간 또는 광학계를 필요로 하고 있다. 본 연구에서는 RGB 3색 LED의 컬러 혼색을 위해 광학 설계를 진행을 하였고, 이 광학계는 광경로 변경을 통해 BLU 내부 공간에서 각각의 3색 LED가 충분한 혼색 구간을 확보하여 백색을 구현하게 된다. 최근 적용하고 있는 Side emitting 방식 LED가 아닌 Top view type의 power LED를 이용하여 32인치급 TV LCD 백라이트를 제작하여 최적화를 진행하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1058-1061
• /
• 2004

Recently, According to companies of TFT LCD are making large sized products more and more. In the vortex of Products with a monitor and LCD TV is applied in a technique of a high viewing angle(FFS, IPS, VA). Also, as a high luminance, high speed response time, high degree of a color purity, and so on are continuing to develop a high performance, it is necessary to improve a specific character of high luminance that apply to LCD TV as a LCD BLU. Because a LCD panel for TV usually has a lower resolution that compare to a monitor, the structure of present backlight system can't put out its power even though it has a merit in transmission. Therefore, the examination of improvement about the high luminance direct typed BLU for LCD TV that presupposes several uses of CCFL(Cold Cathode Fluorescent Lamp) or EEFL(External Electrode Fluorescent Lamp)is actively being progressed. Although it is necessary to increase the number of lamps for applying high performance by the direct type, in this case, because we can design the character of luminance for adoption of high performance. We can satisfy with a level of luminance for LCD TV. Accordingly, we analyzed a change of the number of CCFL, mechanical and optical character to produce the direct typed backlight in 32inches spec. Consequently, we achieved luminance of 6597nit,which was including polarization film, and secured the standard for LCD TV.

• 전력전자학회논문지
• /
• 제9권6호
• /
• pp.577-583
• /
• 2004

액정 디스플레이의 백라이트에 사용되는 냉음극 방전램프(CCFL: Cold Cathode Fluorescent Lamp) 구동을 위해 압전 변압기(Piezoelectric Transformer)를 사용하였으며, 최적 파라미터를 선정하여 실험을 통해 검증하였다. 적용한 압전 인버터로는 푸시-풀(Push-Pull)회로와 하프-브리지(Half-Bridge) 회로이며, 휘도 제어기법으로는 각각 아날로그(Analog) 방식과 버스트(Burst) 방식을 사용하였다. 푸시-풀 인버터의 경우 아날로그 제어방식으로 제어전압 2.5-4.5V에서 출력전류 1-6mA로 휘도 0-100% 특성을 보였다. 입출력 효율로 90.3%를 얻었으며, 하프브리지 인버터에 적용한 버스트 제어방식에서는 듀티비 5-50%에서 1-6mA의 제어 성능을 보였으며, 인버터의 입출력 효율은 82.1%를 얻었다.

• 한국정밀공학회지
• /
• 제31권3호
• /
• pp.261-268
• /
• 2014

Precision screws have a wide range of industrial applications such as electrical and automotive products. To produce screw threads with high precision, not only high precision manufacturing technology but also reliable measurement technology is required. Machine vision systems have been used in the automatic inspection of screw threads based on backlight illumination, which cannot detect defects on the thread surface. Recently, an omnidirectional inspection system for screw threads was developed to obtain $360^{\circ}$ images of screws, based on front light illumination. In this study, the illumination design for the omnidirectional inspection system was modified by adding a light shield to improve the image uniformity. Optical simulation for various shield designs was performed to analyze image uniformity of the obtained images. The simulation results were analyzed statistically using response surface method, from which optical performance of the omnidirectional inspection system could be optimized in terms of image quality and uniformity.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1024-1033
• /
• 2016

In this study, a system is proposed for analyzing whether driver's eyes are open or closed on the basis of images to determine driver's drowsiness. The proposed system converts eye areas detected by a camera to a color space area to effectively detect eyes in a dark situation, for example, tunnels, and a bright situation due to a backlight. In addition, the system used a thickness distribution of a detected eye area as a feature value to analyze whether eyes are open or closed through the Support Vector Machine(SVM), representing 90.09% of accuracy. In the experiment for the images of driver wearing glasses, 83.83% of accuracy was obtained. In addition, in a comparative experiment with the existing PCA method by using Eigen-eye and Pupil Measuring System the detection rate is shown improved. After the experiment, driver's drowsiness was identified accurately by using the method of summing up the state of driver's eyes open and closes over time and the method of detecting driver's eyes that continue to be closed to examine drowsy driving.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.968-971
• /
• 2009

TFT-LCD display system is nowadays one of power-hungry components in portable products; technique of power reduction is thus essential for production of mobile phone. In this work, we minimize the display power, using computationally intelligent statistical methodology. Compared with a conventional design, 68.474% reductions on the current consumption could be obtained for a 2.2-inch of TFT-LCD display system of mobile phone. The total power consumption of the display system consisting of the backlight system and current consumption of display panel is thus successfully reduced form 68.305mW to 64.06mW (about 6.215% reductions).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1353-1356
• /
• 2004

In recent year, OLED(organic light emitted display) is used as the next generation device of FPD. OLED have been replacing the flat panel display device such as LCD, STN-LCD and TFT because this device is more efficient, economic and simple than those FPD devices, and this need not backlight system for visualization. The performance and efficiency of OLED is related with surface defect of ITO coated glass substrate. The typical surface defect of glass substrate is nonuniformity and bad surface roughness. ITO coated glass substrate is destroied for inspection about surface roughness and non-uniformity. Generally detection of the defects in the surface for ITO coated glass substrate is dependent on operator's experience. In this research, relationship between working parameter and surface non-uniformity is studied using regression analysis.