• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.201-209
• /
• 2002

Crib wall system is one of segmental crib type wall. Crib walls are constructed from separate members with no bonds between them other than frictional. The wall units are divide into two main types termed headers and stretchers. The headers run from the front to the back of the wall, perpendicular to the wall face. The cells are created by forming a grid by stacking individual wall components known as headers and stretchers. The body of wall consists of a system of open cell which are filled with a granular material. The design of crib retaining wall is usually based on conventional design methods derived from Rankine and Coulomb theory so that is able to resist the thrust of soil behind it, because it may be assumed that the wall acts as a rigid body. However, deformation characteristics of crib walls cannot be assumed as monolithic. They consist of individual members which have been stacked to creat a three dimensional grid. Therefore, the segmental grid allows relative movement between the individual member within the wall. The three dimensional flexible grid leads to stress distribution by interaction behavior between soil and crib wall. Therefore, in this study, in order to analysis the trends of deflection of crib wall system, new numerical models based on the results of Brandl's full scale test are introduced for design concept.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.637-644
• /
• 2008

Four different extraction and purification methods were evaluated to determine the heterocyclic amines (HCAs) in fried pork patties. Pork patties were cooked in the teflon-coated electric frying pan at $230^{\circ}C$ for 8 min per side. HCAs in the fried pork patties were extracted and purified using four different solid-phase extraction (SPE) methods and quantitated by LC-MS (API-ESI). Recovery of four different extraction and purification methods was evaluated by comparing the HCAs amounts quantified by the standard addition method. Validation of extraction and purification methods for fried pork patties was determined to establish accurate sample preparation. The recoveries of HCAs from different SPE methods were calculated. The recovery yields were 15.7-68.7% (Polar amine group) and 25.0-74.7% (less-polar amine group) in method A. Method D provided recovery yields ranging from 14.1% to 68.7% in polar amine groups and from 3.0% to 72.3% in less-polar amine groups, respectively. Modified procedures of Method A and D were the most suitable extraction and purification method for HCAs analysis from fried pork patties.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

In order to review the utility of Lade's single hardening constitutive model, a series of isotropic compression-expansion tests and consolidated drained triaxial tests including as CTC, TC, RTC, and OSP were performed by Baekma river sand with various of stress path. Parameters required in model were determined using these tests. The accuracy of analysis was reviewed by back analysis of test results used to determine the 11 parameters of soil property through the test of each stress path. Also. for verifying the accuracy of prediction for the stress-strain behavior using failure criterion related 9 parameters with correlational equation and constant and yield criterion related parameters h, ${\alpha}$ and ${\eta}_1$, when stress path is different with each other, it has been obtained in the review result of stress path dependent characteristics of the constitutional model through the analyzing results of CTC, TC, RTC, OSP, and fine silica sand tests.

• Physical Therapy Korea
• /
• v.5 no.3
• /
• pp.72-87
• /
• 1998

This study examined the rates of spinal abnormal curvature and the correlation of the Body Mass Index (BMI), Low Back Pain (LBP) and spinal curvature by measuring scoliosis, kyphosis, and lordosis in university students. The study population included 67 male, 92 female university students, making a total of 159, in Wonju City. Spinal curvature was measured by an electrogoniometer in a computerized skeletal analysis system. Lateral curvature of spine of more than 10 degrees was considered as nonspostural scoliosis. The correlation of BMI, LBP and the spinal curvature was analysed by Pearson's correlation coefficient and t-test. The following results were obtained: 1. The overall incidence and rate of scoliosis in cases with a greater than 10 degree curve in males was an incidence of 8 and a rate of 11%. In females the incidence was 36 and the rate 39.2%. 2. The overall incidence and rate of kyphosis of less than 20 degrees in males was a rate of 9 and an incidence of 11.9%. In females, the rate was 5 and the incidence 5.4%. In kyphosis cases of more than 40 degrees, the male rate was 5 and the incidence 7.7%. For female the rate was 13 and the incidence 14.2%. 3. The overall incidence and rate of lordosis with curves of less than 20 degrees was a rate of 6 for males and an incidence of 9.0%. For females, the rate was 5 and the incidence 5.4%. In cases of more than 50 degrees lordosis, the female rate was 2 and the incidence 2.2%. There were no males in this category. 4. There was a negative correlation between kyphosis and BMI. The greater the kyphotic curve, the less the BMI in males (p<0.05). There was no significant BMI difference by gender in either scoliosis or lordosis. There was, however, a significantly decreased sacral angle in the female group with LBP. The results of this study cannot be generalized to the general population because the subjects were all from one university. The measurements were quite reliable because the angles determined by the Metrocom System were highly correlated with radiologic findings. This study shows the need for a regular screening system for spinal curvatures in university health examination procedures.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.81-87
• /
• 1999

The purpose of this study was to determine the effect of electrical stimulation on the number of MCs and percent of degranulated MCs in rat skin. Twelve male Sprague-Dawley rats were divided into two group; electrical stimulation group (n=6) and control group (n=6). Each animals hair on the back was removed. The electrical stimulation group received an positive rectangular pulsed electrical stimulation, while the control group was given the same treatment without electricity. The biopsy specimens were fixed in formalin, embedded in paraffin and stained with toluidine blue-nuclear fast red and alcian blue-safranin O. respectively. The MCs were counted using a light microscope and computerized image analysis system and calculated as the density and the percent. A t-test showed a significantly higher density of MCs in the electrical stimulated rats than control rats(p<0.05), and the percent of degranulated MCs in the electrical stimulated rats was higher than in the control rats (p<0.05) in toluidine blue stained sections. The density of MCs was significantly higher in the electrical stimulated rats than the control rats in alcian blue-safranin O Stained sections (P<0.01). An analysis of variance showed that the densities of CTMCs was significantly lower than the densities of MMCs and mixed MCs in electrical stimulated rat in alcian blue-safranin O Stained sections (p<0.05). These results suggest that the electrical stimulation may have potential for increasing the number of MCs and lead to degranulate the MCs in rat skin.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.189-197
• /
• 2015

As enforced the regulation of fuel efficiency, the electrification of automotive components in internal combustion vehicle has been applied instead of hydraulic pressure. A typical example of such parts is the EPS (electric power steering), and it is applied to most automotive at present. In electric power steering system, the core component is motor. The reduction of cogging torque and torque ripple is required to improve steering feeling and reduce NVH (Noise Vibration Harshness) in EPS. Generally the skewed design of stator or rotor is applied in order to reduce cogging torque and torque ripple. This paper propose the design and analysis methodology of Brusheless PMSM (Permanent Magnet Synchronous Motor) which is applied to skewed stator. The proposed methodology is as follows: First Intial Design PMSM with skewed stator for EPS, Second Optimal design using RSM (Response surface method), Third Performance Analysis such as Phase Back EMF, Inductance, Load torque using FEA (Finite Element Method). Finally, the reliability of proposed design methodology will be verified through the experiments of prototype sample.

• Geophysics and Geophysical Exploration
• /
• v.16 no.1
• /
• pp.53-58
• /
• 2013

It was introduced a seismic mini-array that could monitor microseismicity efficiently and analyzed seismic data obtained from the mini-array that was operated from December 19, 2012 to January 9, 2013. The mini-array consisted of a six channel data logger, a central 3 components seismometer, and a tripartite array of vertical sensors centered around the 3 components seismometer as an equilateral triangle with about 100 m aperture. All seismometers that had the same instrument response were connected a 6 channel data logger, which was set to record seismograms at a sampling rate of 200 sps. During the three weeks of campaign, a total of 16 microearthquakes were detected. Using time differences of P wave arrivals from the vertical components, S-P time from 3 components seismometers, and back azimuth from the seismic array analysis, it was possible to locate the hypocenter of the microearthquake even with one seismic miniarray. The epicenters of two nearest microearthquakes were a quarry site located 1.3 km from the mini-array. The records of quarry blasting confirmed the our analysis.

• Korean Journal of Veterinary Research
• /
• v.46 no.2
• /
• pp.107-117
• /
• 2006

This paper described the epidemiological characteristics of 2002 outbreak of classical swine fever (CSF) in Korea. A total of thirteen CSF-infected farms could be classified into two clusters according to the location and time of outbreak. Two farms located in the same county of Gangwon province and 11 farms located in several different districts of Incheon metropolitan/Gyeonggi province were identified as CSF-infected from April 16 to 30 and from October 7 to December 21 in 2002, respectively. As the result of epidemiological analysis, the two clusters of outbreaks were turned out to be independent epidemics which had different sources of virus introduction. Three farms were found to have been infected primarily; one located in Cheolwon county of Gangwon province and two located in Kangwha county of Incheon metropolitan area. The most likely factors of virus introduction into these primary infected farms were considered to be direct or indirect contact by foreign workers and/or owners of the infected farms who had come back from traveling in China before outbreaks. This was supported by the genetic typing of CSF viruses isolated from the pigs of infected farms. All the virus isolates of 2002 outbreak were found to be genetic type 2, whereas the viruses isolated before 2000 were type 3 and the reference strains, such as attenuated live vaccine virus (LOM strain) and high virulent challenge virus (ALD strain), were type 1. Accordingly, we concluded that the 2002 CSF outbreak must have been caused by a newly introduced virus from overseas and the type 3 virus must have been eradicated after the last outbreak of 1999 by the national CSF eradication campaign which were implemented since 1996. Based on the combined analysis of epidemiological data and genetic typing, the transmission routes of classical swine fever virus were found to be the movement of vehicles (60%) and persons (10%), neighbourhood spread (20%) and unknown (10%). It is expected that the analyzed data and findings of classical swine fever outbreak epidemic could be very useful to establish the disease control and eradication program for the country in the future.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2006

The purpose of this study was to evaluate normalized jerk according to shoes, slope, and velocity during walking. Eleven different test subjects used three different types of shoes (running shoes, mountain climbing boots, and elevated forefoot walking shoes) at various walking speeds(1.19, 1.25, 1.33, 1.56, 1.78, 1.9, 2, 2.11, 2.33m/sec) and gradients(0, 3, 6, 10 degrees) on a treadmill. Since there were concerns about using the elevated forefoot shoes on an incline, these shoes were not used on a gradient. Motion Analysis (Motion Analysis Corp. Santa Rosa, CA USA) was conducted with four Falcon high speed digital motion capture cameras. Utilizing the maximum smoothness theory, it was hypothesized that there would be differences in jerk according to shoe type, velocity, and slope. Furthermore, it was assumed that running shoes would have the lowest values for normalized jerk because subjects were most accustomed to wearing these shoes. The results demonstrated that elevated forefoot walking shoes had lowest value for normalized jerk at heel. In contrast, elevated forefoot walking shoes had greater normalized jerk at the center of mass at most walking speeds. For most gradients and walking speeds, hiking boots had smaller medio-lateral directional normalized jerk at ankle than running shoes. These results alluded to an inverse ratio for jerk at the heel and at the COM for all types of shoes. Furthermore, as velocity increased, medio-lateral jerk was reduced for all gradients in both hiking boots and running shoes. Due to the fragility of the ankle joint, elevated forefoot walking shoes could be recommended for walking on flat surfaces because they minimize instability at the heel. Although the elevated forefoot walking shoes have the highest levels of jerk at the COM, the structure of the pelvis and spine allows for greater compensatory movement than the ankle. This movement at the COM might even have a beneficial effect of activating the muscles in the back and abdomen more than other shoes. On inclines hiking boots would be recommended over running shoes because hiking boots demonstrated more medio-lateral stability on a gradient than running shoes. These results also demonstrate the usefulness of normalized jerk theory in analyzing the relationship between the body and shoes, walking velocity, and movement up a slope.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.1-11
• /
• 2005

The study were to assess technical factors between the high score group and the low score group, from the subjects of 8 male national gymnasts, and to analyze the kinematical characteristic and main technical cause on technique of Kasamatsu movement on Vault. The result of this study is this. In case of horse contact time the high score group was swifter than low score group, and there was significant difference between the high score group and the low score group(<.01). On high score group the time of taking on from horse showed shorter than that of taking off from horse, while of the low score group the time of taking on the horse was similar to that of taking off from horse on the average. And in time of pre-flight the high score group on average the was 0.16sec shorter times than the low score group, and so there was significantly difference between groups(<.05). Also It is a characteristic that the high score group was short in horse contact time and longer in post-flight. In the horizontal distance of post-flight, the high score group was 0.11m longer than the low score group and there was significantly statistic difference between groups(<.05). In the vertical height of the cog in Post-flight's phrase, the high score group was 0.15m higher than the low score group and there was significantly statistic difference between groups(.<01). The horizontal velocity and vertical velocity in the event of taking on and off Beat board and Vault weren't significantly statistic differences between two groups. In the slow-down of average horizontal velocity during keeping contact with the beat board, the high score group was larger than the low score group. And in an increased average vertical velocity during keeping contact with the beat board, the high score group was even larger than the low score group. In the projectile angle of cog in taking off the beat board, 40.2deg., the angle of low score group and 39.5deg., the angle of high score group are nearly alike. In the projectile angle of cog in taking off the beat, the high score group showed 1.6Wt larger on average than the low score group. However the average reaction force on the board and Vault wasn't almost different between two groups, showed 0.3~0.6Wt larger in the high score group.