• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.4
• /
• pp.203-215
• /
• 2008

Objectives : The purpose of this study was to investigate abdominal muscles in chronic low back pain patients by meridian-electromyograph. Methods : Sample group of 11 with from low back pain during three months and control group of 10 subjects without low back pain have been recruited. Outcomes were assessed using meridian-electromyograph, visual analogue scale, and oswestry disability index. Results : Contraction power of external oblique abdominalis in control group was significantly higher than sample group, but there was no significant difference in muscle fatigue. Conclusions : According to above results, there are correlations between abdominal muscles and low back pain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1511-1517
• /
• 2000

A new slot-coupled back-to-back microstrip array antenna is proposed for using in the IMT-2000 base station or repeater antenna. This antenna is composed of symmetrical SSAIP(Strip Slot, Air Inverted Patch) It has bidirectional radiation pattern in horizontal plane and 22.5$^{\circ}$main beam squint in vertical plane. The analysis is based on the cavity model and the design is achieved using Ensemble. Experimental results for the radiation pattern and the return loss have shown that the direction of the main beam is about 21$^{\circ}$and the impedance bandwidth is approximately 22.9% Thus the proposed antenna is able to operate over both uplink and downlink frequencies in IMT-2000.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.16 no.1
• /
• pp.78-100
• /
• 2016

Objects : The purpose of this study is to value measuring of sagital, horizontal, frontal aspects of DITI as scale of low back pain. Methods : We investigated 16 patients with low back pain who had visited in the H Korean medicine hospital in Gimpo city, Gyeonggi Province from January 1st to, August 31th, 2016. We evaluated the change of them by using Digital Infrared Thermographic Imaging. Results : There is meaningful differences in values for CV12 in pretest and posttest which were observed by DITI. In the Correlation analysis of values of meridian points in pretest and posttest, there is relation ΔSagital04(ST25/BL52), ΔSagital04(CV4/GV3) with low back pain. Conclusions : These results suggest that ΔSagital04(ST25/BL52), ΔSagital04(CV4/GV3) can be used as value of Low back pain.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.124-132
• /
• 2019

The energy balance (EB) model of a primary side regulation (PSR) fly-back converter in the discontinuous conduction mode (DCM) is discussed in this paper. Based on this EB model, the stability of a PSR fly-back converter in the pulse skipping mode (PSM) is analyzed, and a self-adapting modulation factor control strategy is proposed. Theoretical analysis and simulation results show that by saving an optocoupler and correlative circuits, which are necessary in traditional PSM fly-back converters, the modulation factor tolerance controlled by this method is 1.26% on average, corresponding to the ideal value. Compared with traditional fly-back PSM controllers, the power saved in the sampler/comparator modules is 87% on average for a load range of $1{\Omega}$ to $1k{\Omega}$.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.4
• /
• pp.139-148
• /
• 2018

Purpose : The purpose of this study was to examine the effects of waist mobilization technique intervention for patients with chronic back pain on balance and the low back pain disability index. Methods : The subjects were 30 patients with chronic back pain. They were sampled and divided into a manual therapy group and a spinal decompression group. 15 subjects were randomly assigned to each group. Each training in this study participated for 6 weeks, 5 times a week, once a day, 15 minutes a day. Balance ability was measured with a balance analyzer, and the low back pain disability index was measured using the Oswestry Disability Index (ODI). Results : In the balance abilities, there was a significant difference in the manual therapy group compared to the spinal decompression group. In the low back pain disability index, there was a significant difference in the manual therapy group compared to the spinal decompression group. Conclusion : The analysis results of the effect of 6 weeks of waist mobilization technique intervention on the balance and low back pain disability index for patients with chronic back pain revealed that the manual therapy is more effective for static and dynamic balance ability and the low back pain disability index. In the future, we can promote independent life skills and expect a rapid recovery of patients with chronic back pain. Based on this study, further studies are needed on the effects of balance, the mechanical properties of muscle, and the low back pain disability index depending on various manual therapy techniques.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.41-55
• /
• 2005

In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Regional change of force acting, in address, is evenly distributed on both feet. In back swing top, 76% on right foot, 75% on left foot as impact, and 86% on left foot as finish. As regional force acting, in address, pros get high marks on rare and inside of right foot and rare and outside for amateurs. In back swing top, it is higher as fore and inside of left foot, pros as rare part of right foot and amateurs as forefoot. In impact, it is higher for pros and amateurs in outside and rare part of left foot and fore and inside of right foot. In finish, for both pros and amateurs, it is higher for outside and rare parts of left foot. 2. For each club, forces are evenly distributed on both feet in address. In back swing top, the shorter a club is, the higher impact on right foot and the higher finish distribution on left foot. For all the clubs used, in each region, pros get higher on rare and inside of right foot and as amateurs on rare and outside of left foot in address. In back swing top, for all clubs, pros get higher on rare and outside of right foot as fore and outside for amateurs. In impact acting, for all clubs, rare and outside of left foot get higher. In finish, force concentrates on rarefoot. 3. On both feet force, right foot forces of amateurs is higher than those of pros in back swing top. In impact and finish, pros get higher on left foot.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1278-1289
• /
• 2008

Currently in increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method (NATM). Successful design, construction and maintenance of NATM tunnel in urban area demands prediction, control and monitoring of surface settlement, gradient and ground displacement with high accuracy. Use of measured displacement for parameter determination has been researched over the years, and one geotechnical engineering principle has been formed as back analysis. In this paper, back analysis of a ground deformational behavior involving nonlinear behavior is discussed. It is of primary importance to make reliable prediction of deformational behavior for shallow tunnels in soft ground. However, predictions made often prove to be incorrect due to complexity of constitutive law and other relevant factors. Back analysis therefore becomes more important, for it may be used to interpret measured displacement to derive nonlinear material characteristics. The paper shows some example in which a deformational mechanism is studied in the light of inhomogeneous distrubution of Young's module, from which a logic is derived to identify two different types of nonlinear constitutive relationships.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.5-12
• /
• 2018

Tests for transient water release and imbibitions measurement were conducted to estimate the unsaturated hydraulic conductivities by using back analysis. By using transient hydraulic characteristics, both the soil water retention curve and hydraulic conductivity fuction can be evaluated effectively and accurately. In this study the experiment for three samples were conducted accurately to measure the change of water content with time for various steps of matric suction. The back analysis calculated the amount of transient flow reliably in comparison with the experimental results. In the soil water retention curve there was no significant difference between the result of back analysis and that of experiment. The hydraulic conductivity function from back analysis was compared with the theoretical relation based on retention curve but they showed much difference. However, the unsaturated hydraulic behavior obtained by the combination of experimental and analytical techniques are considered to agree with the actual behavior.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.7 s.196
• /
• pp.120-125
• /
• 2007

Analysis of elders' behavioral characteristic during showering provides important fundamental data when developing an automatic showering system. We recorded showering behavior of 37 elders' at the front, back, left and right view using four CCTV cameras. The photographic data were analyzed by counting the frequencies of body scrub and identifying zones where hands could reach. And we measured their body sizes, and conducted questionnaire of showering for 302 peoples. Analysis was done according to the analysis criteria established. The human body was divided into 14 zones from a body, and the numbers of body scrub for each zone were counted. The average total numbers of body scrub were 170.8 excluding the head, the face and the neck. The average numbers of body scrub with right hand were 70.2, left hand were 88.2, and both hands were 81.8. The percentages of body scrub frequencies were 16.3% (breast), 12.2%(crotch), 8.8% (abdomen), 7.5% (waist), 8.8% (shoulder), 7% (hips), 0.4% (back), 15.2% (arm), and 23.9% (leg). Elders scrubbed the breast, crotch and abdomen more frequently than the back and hips. According to the video analysis and questionnaire results, the distribution of shower heads (or nozzles) at the front side should be arranged at the ratio of 40% of the trunk(breast, shoulders, abdomen), 20% of the thighs, the calves, and the crotch, respectively. The distribution of shower heads (or nozzles) of the back side were arranged at the ratio of 20% of the waist and the arms, 20% of the back, the thighs, the calves, and the hip, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.33-41
• /
• 2002

Soil nailing type of retaining structures has been widely used in Korea far the purpose of the temporary and permanent support in excavations and slope stability. The important factors in application of soil nailing systems in urban excavation site nearby the existing structures are the displacement of the wall and tensile farce of the nails, etc. In this paper, the fled back analyses are carried out at 11 excavation sites to investigate the behavior of tensile farce of nails at stepwise excavation in the multi-layered strata including various rock layers. The results of the fled back analysis are less than about 50% of the measured ones. The distance of active zone by measurements are shown almost larger than that of fled back analysis when the distance of active Bone is defined from the surface of wall to the potential failure surface. And the results of fled back analysis are within the range proposed by the project CLOUTERRE and Cartier & Gigan (1983) which were 0.3$H_f$, and 0.5$H_f$, of the final excavation depth ($H_f$,) respectively, but the values of the measurement were larger than these values.